Currently, CVQ doesn't have any synchronization with the driver
status. Then CVQ emulation code run in the middle of:
1) device reset
2) device status changed
3) map updating
The will lead several unexpected issue like trying to execute CVQ
command after the driver has been teared down.
Fixing this by using reslock to synchronize CVQ emulation code with
the driver status changing:
- protect the whole device reset, status changing and map updating
with reslock
- protect the CVQ handler with the reslock and check
VIRTIO_CONFIG_S_DRIVER_OK in the CVQ handler
This will guarantee that:
1) CVQ handler won't work if VIRTIO_CONFIG_S_DRIVER_OK is not set
2) CVQ handler will see a consistent state of the driver instead of
the partial one when it is running in the middle of the
teardown_driver() or setup_driver().
Cc: 5262912ef3cfc ("vdpa/mlx5: Add support for control VQ and MAC setting")
Signed-off-by: Jason Wang <jasowang@xxxxxxxxxx>
---
drivers/vdpa/mlx5/net/mlx5_vnet.c | 42 +++++++++++++++++++++++--------
1 file changed, 31 insertions(+), 11 deletions(-)
diff --git a/drivers/vdpa/mlx5/net/mlx5_vnet.c b/drivers/vdpa/mlx5/net/mlx5_vnet.c
index d5a6fb3f9c41..524240f55c1c 100644
--- a/drivers/vdpa/mlx5/net/mlx5_vnet.c
+++ b/drivers/vdpa/mlx5/net/mlx5_vnet.c
@@ -1618,11 +1618,17 @@ static void mlx5_cvq_kick_handler(struct work_struct *work)
mvdev = wqent->mvdev;
ndev = to_mlx5_vdpa_ndev(mvdev);
cvq = &mvdev->cvq;
+
+ mutex_lock(&ndev->reslock);
+
+ if (!(mvdev->status & VIRTIO_CONFIG_S_DRIVER_OK))
+ goto done;
+
if (!(ndev->mvdev.actual_features & BIT_ULL(VIRTIO_NET_F_CTRL_VQ)))
- return;
+ goto done;
if (!cvq->ready)
- return;
+ goto done;
while (true) {
err = vringh_getdesc_iotlb(&cvq->vring, &cvq->riov, &cvq->wiov, &cvq->head,
@@ -1663,6 +1669,9 @@ static void mlx5_cvq_kick_handler(struct work_struct *work)
break;
}
}
+
+done:
+ mutex_unlock(&ndev->reslock);
}
static void mlx5_vdpa_kick_vq(struct vdpa_device *vdev, u16 idx)
@@ -2125,6 +2134,8 @@ static int mlx5_vdpa_change_map(struct mlx5_vdpa_dev *mvdev, struct vhost_iotlb
struct mlx5_vdpa_net *ndev = to_mlx5_vdpa_ndev(mvdev);
int err;
+ mutex_lock(&ndev->reslock);
+
suspend_vqs(ndev);
err = save_channels_info(ndev);
if (err)
@@ -2137,18 +2148,20 @@ static int mlx5_vdpa_change_map(struct mlx5_vdpa_dev *mvdev, struct vhost_iotlb
goto err_mr;
if (!(mvdev->status & VIRTIO_CONFIG_S_DRIVER_OK))
- return 0;
+ goto err_mr;
restore_channels_info(ndev);
err = setup_driver(mvdev);
if (err)
goto err_setup;
+ mutex_unlock(&ndev->reslock);
return 0;
err_setup:
mlx5_vdpa_destroy_mr(mvdev);
err_mr:
+ mutex_unlock(&ndev->reslock);
return err;
}
@@ -2157,7 +2170,8 @@ static int setup_driver(struct mlx5_vdpa_dev *mvdev)
struct mlx5_vdpa_net *ndev = to_mlx5_vdpa_ndev(mvdev);
int err;
- mutex_lock(&ndev->reslock);
+ WARN_ON(!mutex_is_locked(&ndev->reslock));
+
if (ndev->setup) {
mlx5_vdpa_warn(mvdev, "setup driver called for already setup driver\n");
err = 0;
@@ -2187,7 +2201,6 @@ static int setup_driver(struct mlx5_vdpa_dev *mvdev)
goto err_fwd;
}
ndev->setup = true;
- mutex_unlock(&ndev->reslock);
return 0;
@@ -2198,23 +2211,22 @@ static int setup_driver(struct mlx5_vdpa_dev *mvdev)
err_rqt:
teardown_virtqueues(ndev);
out:
- mutex_unlock(&ndev->reslock);
return err;
}
static void teardown_driver(struct mlx5_vdpa_net *ndev)
{
- mutex_lock(&ndev->reslock);
+
+ WARN_ON(!mutex_is_locked(&ndev->reslock));
+
if (!ndev->setup)
- goto out;
+ return;
remove_fwd_to_tir(ndev);
destroy_tir(ndev);
destroy_rqt(ndev);
teardown_virtqueues(ndev);
ndev->setup = false;
-out:
- mutex_unlock(&ndev->reslock);
}
static void clear_vqs_ready(struct mlx5_vdpa_net *ndev)
@@ -2235,6 +2247,8 @@ static void mlx5_vdpa_set_status(struct vdpa_device *vdev, u8 status)
print_status(mvdev, status, true);
+ mutex_lock(&ndev->reslock);
+
if ((status ^ ndev->mvdev.status) & VIRTIO_CONFIG_S_DRIVER_OK) {
if (status & VIRTIO_CONFIG_S_DRIVER_OK) {
err = setup_driver(mvdev);
@@ -2244,16 +2258,19 @@ static void mlx5_vdpa_set_status(struct vdpa_device *vdev, u8 status)
}
} else {
mlx5_vdpa_warn(mvdev, "did not expect DRIVER_OK to be cleared\n");
- return;
+ goto err_clear;
}
}
ndev->mvdev.status = status;
+ mutex_unlock(&ndev->reslock);
return;
err_setup:
mlx5_vdpa_destroy_mr(&ndev->mvdev);
ndev->mvdev.status |= VIRTIO_CONFIG_S_FAILED;
+err_clear:
+ mutex_unlock(&ndev->reslock);
}
static int mlx5_vdpa_reset(struct vdpa_device *vdev)
@@ -2263,6 +2280,8 @@ static int mlx5_vdpa_reset(struct vdpa_device *vdev)
print_status(mvdev, 0, true);
mlx5_vdpa_info(mvdev, "performing device reset\n");
+
+ mutex_lock(&ndev->reslock);
teardown_driver(ndev);
clear_vqs_ready(ndev);
mlx5_vdpa_destroy_mr(&ndev->mvdev);
@@ -2275,6 +2294,7 @@ static int mlx5_vdpa_reset(struct vdpa_device *vdev)
if (mlx5_vdpa_create_mr(mvdev, NULL))
mlx5_vdpa_warn(mvdev, "create MR failed\n");
}
+ mutex_unlock(&ndev->reslock);
return 0;
}
--
2.18.1
_______________________________________________
Virtualization mailing list
Virtualization@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
