On Tue, Mar 15, 2022 at 10:55:04PM +0900, Suwan Kim wrote:
> On Mon, Mar 14, 2022 at 03:19:01PM +0000, Stefan Hajnoczi wrote:
> > On Sat, Mar 12, 2022 at 12:28:32AM +0900, Suwan Kim wrote:
> > > This patch supports polling I/O via virtio-blk driver. Polling
> > > feature is enabled based on "VIRTIO_BLK_F_MQ" feature and the number
> > > of polling queues can be set by QEMU virtio-blk-pci property
> > > "num-poll-queues=N". This patch improves the polling I/O throughput
> > > and latency.
> > >
> > > The virtio-blk driver doesn't not have a poll function and a poll
> > > queue and it has been operating in interrupt driven method even if
> > > the polling function is called in the upper layer.
> > >
> > > virtio-blk polling is implemented upon 'batched completion' of block
> > > layer. virtblk_poll() queues completed request to io_comp_batch->req_list
> > > and later, virtblk_complete_batch() calls unmap function and ends
> > > the requests in batch.
> > >
> > > virtio-blk reads the number of queues and poll queues from QEMU
> > > virtio-blk-pci properties ("num-queues=N", "num-poll-queues=M").
> > > It allocates N virtqueues to virtio_blk->vqs[N] and it uses [0..(N-M-1)]
> > > as default queues and [(N-M)..(N-1)] as poll queues. Unlike the default
> > > queues, the poll queues have no callback function.
> > >
> > > Regarding HW-SW queue mapping, the default queue mapping uses the
> > > existing method that condsiders MSI irq vector. But the poll queue
> > > doesn't have an irq, so it uses the regular blk-mq cpu mapping.
> > >
> > > To enable poll queues, "num-poll-queues=N" property of virtio-blk-pci
> > > needs to be added to QEMU command line. For that, I temporarily
> > > implemented the property on QEMU. Please refer to the git repository below.
> > >
> > > git : https://github.com/asfaca/qemu.git #on master branch commit
> > >
> > > For verifying the improvement, I did Fio polling I/O performance test
> > > with io_uring engine with the options below.
> > > (io_uring, hipri, randread, direct=1, bs=512, iodepth=64 numjobs=N)
> > > I set 4 vcpu and 4 virtio-blk queues - 2 default queues and 2 poll
> > > queues for VM.
> > > (-device virtio-blk-pci,num-queues=4,num-poll-queues=2)
> > > As a result, IOPS and average latency improved about 10%.
> > >
> > > Test result:
> > >
> > > - Fio io_uring poll without virtio-blk poll support
> > > -- numjobs=1 : IOPS = 297K, avg latency = 214.59us
> > > -- numjobs=2 : IOPS = 360K, avg latency = 363.88us
> > > -- numjobs=4 : IOPS = 289K, avg latency = 885.42us
> > >
> > > - Fio io_uring poll with virtio-blk poll support
> > > -- numjobs=1 : IOPS = 332K, avg latency = 192.61us
> > > -- numjobs=2 : IOPS = 371K, avg latency = 348.31us
> > > -- numjobs=4 : IOPS = 321K, avg latency = 795.93us
> >
> > Last year there was a patch series that switched regular queues into
> > polling queues when HIPRI requests were in flight:
> > https://lore.kernel.org/linux-block/20210520141305.355961-1-stefanha@xxxxxxxxxx/T/
> >
> > The advantage is that polling is possible without prior device
> > configuration, making it easier for users.
> >
> > However, the dynamic approach is a bit more complex and bugs can result
> > in lost irqs (hung I/O). Christoph Hellwig asked for dedicated polling
> > queues, which your patch series now delivers.
> >
> > I think your patch series is worth merging once the comments others have
> > already made have been addressed. I'll keep an eye out for the VIRTIO
> > spec change to extend the virtio-blk configuration space, which needs to
> > be accepted before the Linux can be merged.
>
> Thanks for the feedback :)
> There's a lot of history.. I will try to improve the patch.
>
> It might take some time because it need more discussion about qemu
> device property and I do this in my night time.
I see, it's great that you're making this contribution. Don't worry
about the old patch series I linked. I think your approach is fine.
Stefan
Attachment:
signature.asc
Description: PGP signature
_______________________________________________ Virtualization mailing list Virtualization@xxxxxxxxxxxxxxxxxxxxxxxxxx https://lists.linuxfoundation.org/mailman/listinfo/virtualization
