Re: [PATCH] vhost: validate range size before adding to iotlb

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Feb 22, 2022 at 10:57:41PM +0530, Anirudh Rayabharam wrote:
> On Tue, Feb 22, 2022 at 10:02:29AM -0500, Michael S. Tsirkin wrote:
> > On Tue, Feb 22, 2022 at 03:11:07PM +0800, Jason Wang wrote:
> > > On Tue, Feb 22, 2022 at 12:57 PM Anirudh Rayabharam <mail@xxxxxxxxxxxxx> wrote:
> > > >
> > > > On Tue, Feb 22, 2022 at 10:50:20AM +0800, Jason Wang wrote:
> > > > > On Tue, Feb 22, 2022 at 3:53 AM Anirudh Rayabharam <mail@xxxxxxxxxxxxx> wrote:
> > > > > >
> > > > > > In vhost_iotlb_add_range_ctx(), validate the range size is non-zero
> > > > > > before proceeding with adding it to the iotlb.
> > > > > >
> > > > > > Range size can overflow to 0 when start is 0 and last is (2^64 - 1).
> > > > > > One instance where it can happen is when userspace sends an IOTLB
> > > > > > message with iova=size=uaddr=0 (vhost_process_iotlb_msg). So, an
> > > > > > entry with size = 0, start = 0, last = (2^64 - 1) ends up in the
> > > > > > iotlb. Next time a packet is sent, iotlb_access_ok() loops
> > > > > > indefinitely due to that erroneous entry:
> > > > > >
> > > > > >         Call Trace:
> > > > > >          <TASK>
> > > > > >          iotlb_access_ok+0x21b/0x3e0 drivers/vhost/vhost.c:1340
> > > > > >          vq_meta_prefetch+0xbc/0x280 drivers/vhost/vhost.c:1366
> > > > > >          vhost_transport_do_send_pkt+0xe0/0xfd0 drivers/vhost/vsock.c:104
> > > > > >          vhost_worker+0x23d/0x3d0 drivers/vhost/vhost.c:372
> > > > > >          kthread+0x2e9/0x3a0 kernel/kthread.c:377
> > > > > >          ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295
> > > > > >          </TASK>
> > > > > >
> > > > > > Reported by syzbot at:
> > > > > >         https://syzkaller.appspot.com/bug?extid=0abd373e2e50d704db87
> > > > > >
> > > > > > Reported-by: syzbot+0abd373e2e50d704db87@xxxxxxxxxxxxxxxxxxxxxxxxx
> > > > > > Tested-by: syzbot+0abd373e2e50d704db87@xxxxxxxxxxxxxxxxxxxxxxxxx
> > > > > > Signed-off-by: Anirudh Rayabharam <mail@xxxxxxxxxxxxx>
> > > > > > ---
> > > > > >  drivers/vhost/iotlb.c | 6 ++++--
> > > > > >  1 file changed, 4 insertions(+), 2 deletions(-)
> > > > > >
> > > > > > diff --git a/drivers/vhost/iotlb.c b/drivers/vhost/iotlb.c
> > > > > > index 670d56c879e5..b9de74bd2f9c 100644
> > > > > > --- a/drivers/vhost/iotlb.c
> > > > > > +++ b/drivers/vhost/iotlb.c
> > > > > > @@ -53,8 +53,10 @@ int vhost_iotlb_add_range_ctx(struct vhost_iotlb *iotlb,
> > > > > >                               void *opaque)
> > > > > >  {
> > > > > >         struct vhost_iotlb_map *map;
> > > > > > +       u64 size = last - start + 1;
> > > > > >
> > > > > > -       if (last < start)
> > > > > > +       // size can overflow to 0 when start is 0 and last is (2^64 - 1).
> > > > > > +       if (last < start || size == 0)
> > > > > >                 return -EFAULT;
> > > > >
> > > > > I'd move this check to vhost_chr_iter_write(), then for the device who
> > > > > has its own msg handler (e.g vDPA) can benefit from it as well.
> > > >
> > > > Thanks for reviewing!
> > > >
> > > > I kept the check here thinking that all devices would benefit from it
> > > > because they would need to call vhost_iotlb_add_range() to add an entry
> > > > to the iotlb. Isn't that correct?
> > > 
> > > Correct for now but not for the future, it's not guaranteed that the
> > > per device iotlb message handler will use vhost iotlb.
> > > 
> > > But I agree that we probably don't need to care about it too much now.
> > > 
> > > > Do you see any other benefit in moving
> > > > it to vhost_chr_iter_write()?
> > > >
> > > > One concern I have is that if we move it out some future caller to
> > > > vhost_iotlb_add_range() might forget to handle this case.
> > > 
> > > Yes.
> > > 
> > > Rethink the whole fix, we're basically rejecting [0, ULONG_MAX] range
> > > which seems a little bit odd.
> > 
> > Well, I guess ideally we'd split this up as two entries - this kind of
> > thing is after all one of the reasons we initially used first,last as
> > the API - as opposed to first,size.
> 
> IIUC, the APIs exposed to userspace accept first,size.

Some of them.


/* vhost vdpa IOVA range
 * @first: First address that can be mapped by vhost-vDPA
 * @last: Last address that can be mapped by vhost-vDPA
 */
struct vhost_vdpa_iova_range {
        __u64 first;
        __u64 last;
};

but

struct vhost_iotlb_msg {
        __u64 iova;
        __u64 size;
        __u64 uaddr;
#define VHOST_ACCESS_RO      0x1
#define VHOST_ACCESS_WO      0x2
#define VHOST_ACCESS_RW      0x3
        __u8 perm;
#define VHOST_IOTLB_MISS           1
#define VHOST_IOTLB_UPDATE         2
#define VHOST_IOTLB_INVALIDATE     3
#define VHOST_IOTLB_ACCESS_FAIL    4
/*
 * VHOST_IOTLB_BATCH_BEGIN and VHOST_IOTLB_BATCH_END allow modifying
 * multiple mappings in one go: beginning with
 * VHOST_IOTLB_BATCH_BEGIN, followed by any number of
 * VHOST_IOTLB_UPDATE messages, and ending with VHOST_IOTLB_BATCH_END.
 * When one of these two values is used as the message type, the rest
 * of the fields in the message are ignored. There's no guarantee that
 * these changes take place automatically in the device.
 */
#define VHOST_IOTLB_BATCH_BEGIN    5
#define VHOST_IOTLB_BATCH_END      6
        __u8 type;
};



> Which means that
> right now there is now way for userspace to map this range. So, is there
> any value in not simply rejecting this range?
> 
> > 
> > Anirudh, could you do it like this instead of rejecting?
> > 
> > 
> > > I wonder if it's better to just remove
> > > the map->size. Having a quick glance at the the user, I don't see any
> > > blocker for this.
> > > 
> > > Thanks
> > 
> > I think it's possible but won't solve the bug by itself, and we'd need
> > to review and fix all users - a high chance of introducing
> > another regression. 
> 
> Agreed, I did a quick review of the usages and getting rid of size
> didn't seem trivial.
> 
> Thanks,
> 
> 	- Anirudh.
> 
> > And I think there's value of fitting under the
> > stable rule of 100 lines with context.
> > So sure, but let's fix the bug first.
> > 
> > 
> > 
> > > >
> > > > Thanks!
> > > >
> > > >         - Anirudh.
> > > >
> > > > >
> > > > > Thanks
> > > > >
> > > > > >
> > > > > >         if (iotlb->limit &&
> > > > > > @@ -69,7 +71,7 @@ int vhost_iotlb_add_range_ctx(struct vhost_iotlb *iotlb,
> > > > > >                 return -ENOMEM;
> > > > > >
> > > > > >         map->start = start;
> > > > > > -       map->size = last - start + 1;
> > > > > > +       map->size = size;
> > > > > >         map->last = last;
> > > > > >         map->addr = addr;
> > > > > >         map->perm = perm;
> > > > > > --
> > > > > > 2.35.1
> > > > > >
> > > > >
> > > >
> > 

_______________________________________________
Virtualization mailing list
Virtualization@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linuxfoundation.org/mailman/listinfo/virtualization



[Index of Archives]     [KVM Development]     [Libvirt Development]     [Libvirt Users]     [CentOS Virtualization]     [Netdev]     [Ethernet Bridging]     [Linux Wireless]     [Kernel Newbies]     [Security]     [Linux for Hams]     [Netfilter]     [Bugtraq]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux Admin]     [Samba]

  Powered by Linux