On Fri, 21 Jan 2022 05:22:59 -0500, Michael S. Tsirkin <mst@xxxxxxxxxx> wrote:
> On Fri, Jan 21, 2022 at 05:22:29AM -0500, Michael S. Tsirkin wrote:
> > On Fri, Jan 21, 2022 at 10:22:59AM +0800, Xuan Zhuo wrote:
> > > On Thu, 20 Jan 2022 10:03:45 -0500, Michael S. Tsirkin <mst@xxxxxxxxxx> wrote:
> > > > On Thu, Jan 20, 2022 at 07:46:20PM +0800, Xuan Zhuo wrote:
> > > > > On Thu, 20 Jan 2022 05:55:14 -0500, Michael S. Tsirkin <mst@xxxxxxxxxx> wrote:
> > > > > > On Thu, Jan 20, 2022 at 02:42:58PM +0800, Xuan Zhuo wrote:
> > > > > > > This patch implements virtio pci support for QUEUE RESET.
> > > > > > >
> > > > > > > Performing reset on a queue is divided into two steps:
> > > > > > >
> > > > > > > 1. reset_vq: reset one vq
> > > > > > > 2. enable_reset_vq: re-enable the reset queue
> > > > > > >
> > > > > > > In the first step, these tasks will be completed:
> > > > > > > 1. notify the hardware queue to reset
> > > > > > > 2. recycle the buffer from vq
> > > > > > > 3. delete the vq
> > > > > > >
> > > > > > > When deleting a vq, vp_del_vq() will be called to release all the memory
> > > > > > > of the vq. But this does not affect the process of deleting vqs, because
> > > > > > > that is based on the queue to release all the vqs. During this process,
> > > > > > > the vq has been removed from the queue.
> > > > > > >
> > > > > > > When deleting vq, info and vq will be released, and I save msix_vec in
> > > > > > > vp_dev->vqs[queue_index]. When re-enable, the current msix_vec can be
> > > > > > > reused. And based on intx_enabled to determine which method to use to
> > > > > > > enable this queue.
> > > > > > >
> > > > > > > Signed-off-by: Xuan Zhuo <xuanzhuo@xxxxxxxxxxxxxxxxx>
> > > > > >
> > > > > > There's something I don't understand here. It looks like
> > > > > > you assume that when you reset a queue, you also
> > > > > > reset the mapping from queue to event vector.
> > > > > > The spec does not say it should, and I don't think it's
> > > > > > useful to extend spec to do it - we already have a simple
> > > > > > way to tweak the mapping.
> > > > > >
> > > > >
> > > > > Sorry, what is the already existing method you are referring to, I didn't find
> > > > > it.
> > > >
> > > >
> > > > Write 0xffff into vector number.
> > >
> > > I wonder if there is some misunderstanding here.
> > >
> > > My purpose is to release vq, then for the vector used by vq, I hope that it can
> > > be reused when re-enable.
> > >
> > > But the vector number is not in a fixed order. When I re-enable it, I don't know
> > > what the original vector number is. So I found a place to save this number.
> > >
> > > The queue reset I implemented is divided into the following steps:
> > > 1. notify the driver to queue reset
> > > 2. disable_irq()
> > > 3. free unused bufs
> > > 4. free irq, free vq, free info
>
> step 4 here seems pointless.
The core operation is to release the vq. The release of the irq is indeed by the
way. We can leave the irq untouched.
1. notify the driver to queue reset
2. disable_irq()
3. free unused bufs
4. free vq, free info
Thanks.
>
> > > The process of enable is divided into the following steps:
> > > 1. Get the vector number used by the original vq and re-setup vq
> > > 2. enable vq
> > > 3. enable irq
> > >
> > > If there is anything unreasonable please let me know.
> > >
> > > Thanks.
> >
> > Why do you free irq?
> >
> > > >
> > > > > I think you mean that we don't have to reset the event vector, I think you are
> > > > > right.
> > > > >
> > > > >
> > > > >
> > > > > Thanks.
> > > > >
> > > > > > Avoid doing that, and things will be much easier, with no need
> > > > > > to interact with a transport, won't they?
> > > > > >
> > > > > >
> > > > > > > ---
> > > > > > > drivers/virtio/virtio_pci_common.c | 49 ++++++++++++++++++++
> > > > > > > drivers/virtio/virtio_pci_common.h | 4 ++
> > > > > > > drivers/virtio/virtio_pci_modern.c | 73 ++++++++++++++++++++++++++++++
> > > > > > > 3 files changed, 126 insertions(+)
> > > > > > >
> > > > > > > diff --git a/drivers/virtio/virtio_pci_common.c b/drivers/virtio/virtio_pci_common.c
> > > > > > > index 5afe207ce28a..28b5ffde4621 100644
> > > > > > > --- a/drivers/virtio/virtio_pci_common.c
> > > > > > > +++ b/drivers/virtio/virtio_pci_common.c
> > > > > > > @@ -464,6 +464,55 @@ int vp_find_vqs(struct virtio_device *vdev, unsigned nvqs,
> > > > > > > return vp_find_vqs_intx(vdev, nvqs, vqs, callbacks, names, ctx);
> > > > > > > }
> > > > > > >
> > > > > > > +#define VQ_IS_DELETED(vp_dev, idx) ((unsigned long)vp_dev->vqs[idx] & 1)
> > > > > > > +#define VQ_RESET_MSIX_VEC(vp_dev, idx) ((unsigned long)vp_dev->vqs[idx] >> 2)
> > > > > > > +#define VQ_RESET_MARK(msix_vec) ((void *)(long)((msix_vec << 2) + 1))
> > > > > > > +
> > > > > > > +void vp_del_reset_vq(struct virtio_device *vdev, u16 queue_index)
> > > > > > > +{
> > > > > > > + struct virtio_pci_device *vp_dev = to_vp_device(vdev);
> > > > > > > + struct virtio_pci_vq_info *info;
> > > > > > > + u16 msix_vec;
> > > > > > > +
> > > > > > > + info = vp_dev->vqs[queue_index];
> > > > > > > +
> > > > > > > + msix_vec = info->msix_vector;
> > > > > > > +
> > > > > > > + /* delete vq */
> > > > > > > + vp_del_vq(info->vq);
> > > > > > > +
> > > > > > > + /* Mark the vq has been deleted, and save the msix_vec. */
> > > > > > > + vp_dev->vqs[queue_index] = VQ_RESET_MARK(msix_vec);
> > > > > > > +}
> > > > > > > +
> > > > > > > +struct virtqueue *vp_enable_reset_vq(struct virtio_device *vdev,
> > > > > > > + int queue_index,
> > > > > > > + vq_callback_t *callback,
> > > > > > > + const char *name,
> > > > > > > + const bool ctx)
> > > > > > > +{
> > > > > > > + struct virtio_pci_device *vp_dev = to_vp_device(vdev);
> > > > > > > + struct virtqueue *vq;
> > > > > > > + u16 msix_vec;
> > > > > > > +
> > > > > > > + if (!VQ_IS_DELETED(vp_dev, queue_index))
> > > > > > > + return ERR_PTR(-EPERM);
> > > > > > > +
> > > > > > > + msix_vec = VQ_RESET_MSIX_VEC(vp_dev, queue_index);
> > > > > > > +
> > > > > > > + if (vp_dev->intx_enabled)
> > > > > > > + vq = vp_setup_vq(vdev, queue_index, callback, name, ctx,
> > > > > > > + VIRTIO_MSI_NO_VECTOR);
> > > > > > > + else
> > > > > > > + vq = vp_enable_vq_msix(vdev, queue_index, callback, name, ctx,
> > > > > > > + msix_vec);
> > > > > > > +
> > > > > > > + if (IS_ERR(vq))
> > > > > > > + vp_dev->vqs[queue_index] = VQ_RESET_MARK(msix_vec);
> > > > > > > +
> > > > > > > + return vq;
> > > > > > > +}
> > > > > > > +
> > > > > > > const char *vp_bus_name(struct virtio_device *vdev)
> > > > > > > {
> > > > > > > struct virtio_pci_device *vp_dev = to_vp_device(vdev);
> > > > > > > diff --git a/drivers/virtio/virtio_pci_common.h b/drivers/virtio/virtio_pci_common.h
> > > > > > > index 23f6c5c678d5..96c13b1398f8 100644
> > > > > > > --- a/drivers/virtio/virtio_pci_common.h
> > > > > > > +++ b/drivers/virtio/virtio_pci_common.h
> > > > > > > @@ -115,6 +115,10 @@ int vp_find_vqs(struct virtio_device *vdev, unsigned nvqs,
> > > > > > > struct virtqueue *vqs[], vq_callback_t *callbacks[],
> > > > > > > const char * const names[], const bool *ctx,
> > > > > > > struct irq_affinity *desc);
> > > > > > > +void vp_del_reset_vq(struct virtio_device *vdev, u16 queue_index);
> > > > > > > +struct virtqueue *vp_enable_reset_vq(struct virtio_device *vdev, int queue_index,
> > > > > > > + vq_callback_t *callback, const char *name,
> > > > > > > + const bool ctx);
> > > > > > > const char *vp_bus_name(struct virtio_device *vdev);
> > > > > > >
> > > > > > > /* Setup the affinity for a virtqueue:
> > > > > > > diff --git a/drivers/virtio/virtio_pci_modern.c b/drivers/virtio/virtio_pci_modern.c
> > > > > > > index 5455bc041fb6..fbf87239c920 100644
> > > > > > > --- a/drivers/virtio/virtio_pci_modern.c
> > > > > > > +++ b/drivers/virtio/virtio_pci_modern.c
> > > > > > > @@ -34,6 +34,9 @@ static void vp_transport_features(struct virtio_device *vdev, u64 features)
> > > > > > > if ((features & BIT_ULL(VIRTIO_F_SR_IOV)) &&
> > > > > > > pci_find_ext_capability(pci_dev, PCI_EXT_CAP_ID_SRIOV))
> > > > > > > __virtio_set_bit(vdev, VIRTIO_F_SR_IOV);
> > > > > > > +
> > > > > > > + if (features & BIT_ULL(VIRTIO_F_RING_RESET))
> > > > > > > + __virtio_set_bit(vdev, VIRTIO_F_RING_RESET);
> > > > > > > }
> > > > > > >
> > > > > > > /* virtio config->finalize_features() implementation */
> > > > > > > @@ -176,6 +179,72 @@ static void vp_reset(struct virtio_device *vdev)
> > > > > > > vp_disable_cbs(vdev);
> > > > > > > }
> > > > > > >
> > > > > > > +static int vp_modern_reset_vq(struct virtio_device *vdev, u16 queue_index,
> > > > > > > + vq_reset_callback_t *callback, void *data)
> > > > > > > +{
> > > > > > > + struct virtio_pci_device *vp_dev = to_vp_device(vdev);
> > > > > > > + struct virtio_pci_modern_device *mdev = &vp_dev->mdev;
> > > > > > > + struct virtio_pci_vq_info *info;
> > > > > > > + u16 msix_vec;
> > > > > > > + void *buf;
> > > > > > > +
> > > > > > > + if (!virtio_has_feature(vdev, VIRTIO_F_RING_RESET))
> > > > > > > + return -ENOENT;
> > > > > > > +
> > > > > > > + vp_modern_set_queue_reset(mdev, queue_index);
> > > > > > > +
> > > > > > > + /* After write 1 to queue reset, the driver MUST wait for a read of
> > > > > > > + * queue reset to return 1.
> > > > > > > + */
> > > > > > > + while (vp_modern_get_queue_reset(mdev, queue_index) != 1)
> > > > > > > + msleep(1);
> > > > > > > +
> > > > > > > + info = vp_dev->vqs[queue_index];
> > > > > > > + msix_vec = info->msix_vector;
> > > > > > > +
> > > > > > > + /* Disable VQ callback. */
> > > > > > > + if (vp_dev->per_vq_vectors && msix_vec != VIRTIO_MSI_NO_VECTOR)
> > > > > > > + disable_irq(pci_irq_vector(vp_dev->pci_dev, msix_vec));
> > > > > > > +
> > > > > > > + while ((buf = virtqueue_detach_unused_buf(info->vq)) != NULL)
> > > > > > > + callback(vdev, buf, data);
> > > > > > > +
> > > > > > > + vp_del_reset_vq(vdev, queue_index);
> > > > > > > +
> > > > > > > + return 0;
> > > > > > > +}
> > > > > > > +
> > > > > > > +static struct virtqueue *vp_modern_enable_reset_vq(struct virtio_device *vdev,
> > > > > > > + u16 queue_index,
> > > > > > > + vq_callback_t *callback,
> > > > > > > + const char *name,
> > > > > > > + const bool *ctx)
> > > > > > > +{
> > > > > > > + struct virtio_pci_device *vp_dev = to_vp_device(vdev);
> > > > > > > + struct virtio_pci_modern_device *mdev = &vp_dev->mdev;
> > > > > > > + struct virtqueue *vq;
> > > > > > > + u16 msix_vec;
> > > > > > > +
> > > > > > > + if (!virtio_has_feature(vdev, VIRTIO_F_RING_RESET))
> > > > > > > + return ERR_PTR(-ENOENT);
> > > > > > > +
> > > > > > > + /* check queue reset status */
> > > > > > > + if (vp_modern_get_queue_reset(mdev, queue_index) != 1)
> > > > > > > + return ERR_PTR(-EBUSY);
> > > > > > > +
> > > > > > > + vq = vp_enable_reset_vq(vdev, queue_index, callback, name, ctx);
> > > > > > > + if (IS_ERR(vq))
> > > > > > > + return vq;
> > > > > > > +
> > > > > > > + vp_modern_set_queue_enable(&vp_dev->mdev, vq->index, true);
> > > > > > > +
> > > > > > > + msix_vec = vp_dev->vqs[queue_index]->msix_vector;
> > > > > > > + if (vp_dev->per_vq_vectors && msix_vec != VIRTIO_MSI_NO_VECTOR)
> > > > > > > + enable_irq(pci_irq_vector(vp_dev->pci_dev, msix_vec));
> > > > > > > +
> > > > > > > + return vq;
> > > > > > > +}
> > > > > > > +
> > > > > > > static u16 vp_config_vector(struct virtio_pci_device *vp_dev, u16 vector)
> > > > > > > {
> > > > > > > return vp_modern_config_vector(&vp_dev->mdev, vector);
> > > > > > > @@ -395,6 +464,8 @@ static const struct virtio_config_ops virtio_pci_config_nodev_ops = {
> > > > > > > .set_vq_affinity = vp_set_vq_affinity,
> > > > > > > .get_vq_affinity = vp_get_vq_affinity,
> > > > > > > .get_shm_region = vp_get_shm_region,
> > > > > > > + .reset_vq = vp_modern_reset_vq,
> > > > > > > + .enable_reset_vq = vp_modern_enable_reset_vq,
> > > > > > > };
> > > > > > >
> > > > > > > static const struct virtio_config_ops virtio_pci_config_ops = {
> > > > > > > @@ -413,6 +484,8 @@ static const struct virtio_config_ops virtio_pci_config_ops = {
> > > > > > > .set_vq_affinity = vp_set_vq_affinity,
> > > > > > > .get_vq_affinity = vp_get_vq_affinity,
> > > > > > > .get_shm_region = vp_get_shm_region,
> > > > > > > + .reset_vq = vp_modern_reset_vq,
> > > > > > > + .enable_reset_vq = vp_modern_enable_reset_vq,
> > > > > > > };
> > > > > > >
> > > > > > > /* the PCI probing function */
> > > > > > > --
> > > > > > > 2.31.0
> > > > > >
> > > >
>
_______________________________________________
Virtualization mailing list
Virtualization@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
