Re: [PATCH V2 06/12] virtio_pci: harden MSI-X interrupts

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Oct 15, 2021 at 05:09:38AM -0700, Dongli Zhang wrote:
> Hi Jason,
> 
> On 10/11/21 11:52 PM, Jason Wang wrote:
> > We used to synchronize pending MSI-X irq handlers via
> > synchronize_irq(), this may not work for the untrusted device which
> > may keep sending interrupts after reset which may lead unexpected
> > results. Similarly, we should not enable MSI-X interrupt until the
> 
> About "unexpected results", while you mentioned below in v1 ...
> 
> "My understanding is that e.g in the case of SEV/TDX we don't trust the
> hypervisor. So the hypervisor can keep sending interrupts even if the
> device is reset. The guest can only trust its own software interrupt
> management logic to avoid call virtio callback in this case."
> 
> .. and you also mentioned to avoid the panic (due to untrusted device) in as
> many scenarios as possible.
> 
> 
> Here is my understanding.
> 
> The reason we do not trust hypervisor is to protect (1) data/code privacy for
> most of times and sometimes (2) program execution integrity.
> 
> The bad thing is: the hypervisor is able to panic/destroy the VM in the worst case.
> 
> It is reasonable to re-configure/recover if we assume there is BUG at
> hypervisor/device side. That is, the hypervisor/device is buggy, but not malicious.
> 
> However, how about to just detect and report the hypervisor/device is malicious
> and shutdown/panic the VM immediately? If we have detected the malicious
> hypervisor, we should avoid running VMs on the malicious hypervisor further. At
> least how about to print error message to reminder users that the hypervisor is
> malicious?
> 
> 
> About "unexpected results", it should not be hang/panic. I suggest ...
> 
> Assuming SEV/TDX is involved, the hypervisor should never be able to derive the
> VM privacy (at least secure memory data) by providing malicious configuration,
> e.g., num_queues=0. If we detect hypervisor is malicious, the VM is
> panic/shutdown immediately. At least how about to print error message to
> reminder users.
> 
> 
> BTW, while I always do care about the loss of interrupt issue, the malicious
> device is able to hang a VM by dropping a single interrupt on purpose for
> virtio-scsi :)
> 
> 
> Thank you very much!


Can't say I understand what it's about. TDX does not protect against
hypervisor DoS attacks.

> Dongli Zhang
> 
> > device is ready. So this patch fixes those two issues by:
> > 
> > 1) switching to use disable_irq() to prevent the virtio interrupt
> >    handlers to be called after the device is reset.
> > 2) using IRQF_NO_AUTOEN and enable the MSI-X irq during .ready()
> > 
> > This can make sure the virtio interrupt handler won't be called before
> > virtio_device_ready() and after reset.
> > 
> > Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
> > Cc: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
> > Cc: Paul E. McKenney <paulmck@xxxxxxxxxx>
> > Signed-off-by: Jason Wang <jasowang@xxxxxxxxxx>
> > ---
> >  drivers/virtio/virtio_pci_common.c | 27 +++++++++++++++++++++------
> >  drivers/virtio/virtio_pci_common.h |  6 ++++--
> >  drivers/virtio/virtio_pci_legacy.c |  5 +++--
> >  drivers/virtio/virtio_pci_modern.c |  6 ++++--
> >  4 files changed, 32 insertions(+), 12 deletions(-)
> > 
> > diff --git a/drivers/virtio/virtio_pci_common.c b/drivers/virtio/virtio_pci_common.c
> > index b35bb2d57f62..0b9523e6dd39 100644
> > --- a/drivers/virtio/virtio_pci_common.c
> > +++ b/drivers/virtio/virtio_pci_common.c
> > @@ -24,8 +24,8 @@ MODULE_PARM_DESC(force_legacy,
> >  		 "Force legacy mode for transitional virtio 1 devices");
> >  #endif
> >  
> > -/* wait for pending irq handlers */
> > -void vp_synchronize_vectors(struct virtio_device *vdev)
> > +/* disable irq handlers */
> > +void vp_disable_vectors(struct virtio_device *vdev)
> >  {
> >  	struct virtio_pci_device *vp_dev = to_vp_device(vdev);
> >  	int i;
> > @@ -34,7 +34,20 @@ void vp_synchronize_vectors(struct virtio_device *vdev)
> >  		synchronize_irq(vp_dev->pci_dev->irq);
> >  
> >  	for (i = 0; i < vp_dev->msix_vectors; ++i)
> > -		synchronize_irq(pci_irq_vector(vp_dev->pci_dev, i));
> > +		disable_irq(pci_irq_vector(vp_dev->pci_dev, i));
> > +}
> > +
> > +/* enable irq handlers */
> > +void vp_enable_vectors(struct virtio_device *vdev)
> > +{
> > +	struct virtio_pci_device *vp_dev = to_vp_device(vdev);
> > +	int i;
> > +
> > +	if (vp_dev->intx_enabled)
> > +		return;
> > +
> > +	for (i = 0; i < vp_dev->msix_vectors; ++i)
> > +		enable_irq(pci_irq_vector(vp_dev->pci_dev, i));
> >  }
> >  
> >  /* the notify function used when creating a virt queue */
> > @@ -141,7 +154,8 @@ static int vp_request_msix_vectors(struct virtio_device *vdev, int nvectors,
> >  	snprintf(vp_dev->msix_names[v], sizeof *vp_dev->msix_names,
> >  		 "%s-config", name);
> >  	err = request_irq(pci_irq_vector(vp_dev->pci_dev, v),
> > -			  vp_config_changed, 0, vp_dev->msix_names[v],
> > +			  vp_config_changed, IRQF_NO_AUTOEN,
> > +			  vp_dev->msix_names[v],
> >  			  vp_dev);
> >  	if (err)
> >  		goto error;
> > @@ -160,7 +174,8 @@ static int vp_request_msix_vectors(struct virtio_device *vdev, int nvectors,
> >  		snprintf(vp_dev->msix_names[v], sizeof *vp_dev->msix_names,
> >  			 "%s-virtqueues", name);
> >  		err = request_irq(pci_irq_vector(vp_dev->pci_dev, v),
> > -				  vp_vring_interrupt, 0, vp_dev->msix_names[v],
> > +				  vp_vring_interrupt, IRQF_NO_AUTOEN,
> > +				  vp_dev->msix_names[v],
> >  				  vp_dev);
> >  		if (err)
> >  			goto error;
> > @@ -337,7 +352,7 @@ static int vp_find_vqs_msix(struct virtio_device *vdev, unsigned nvqs,
> >  			 "%s-%s",
> >  			 dev_name(&vp_dev->vdev.dev), names[i]);
> >  		err = request_irq(pci_irq_vector(vp_dev->pci_dev, msix_vec),
> > -				  vring_interrupt, 0,
> > +				  vring_interrupt, IRQF_NO_AUTOEN,
> >  				  vp_dev->msix_names[msix_vec],
> >  				  vqs[i]);
> >  		if (err)
> > diff --git a/drivers/virtio/virtio_pci_common.h b/drivers/virtio/virtio_pci_common.h
> > index beec047a8f8d..a235ce9ff6a5 100644
> > --- a/drivers/virtio/virtio_pci_common.h
> > +++ b/drivers/virtio/virtio_pci_common.h
> > @@ -102,8 +102,10 @@ static struct virtio_pci_device *to_vp_device(struct virtio_device *vdev)
> >  	return container_of(vdev, struct virtio_pci_device, vdev);
> >  }
> >  
> > -/* wait for pending irq handlers */
> > -void vp_synchronize_vectors(struct virtio_device *vdev);
> > +/* disable irq handlers */
> > +void vp_disable_vectors(struct virtio_device *vdev);
> > +/* enable irq handlers */
> > +void vp_enable_vectors(struct virtio_device *vdev);
> >  /* the notify function used when creating a virt queue */
> >  bool vp_notify(struct virtqueue *vq);
> >  /* the config->del_vqs() implementation */
> > diff --git a/drivers/virtio/virtio_pci_legacy.c b/drivers/virtio/virtio_pci_legacy.c
> > index d62e9835aeec..bdf6bc667ab5 100644
> > --- a/drivers/virtio/virtio_pci_legacy.c
> > +++ b/drivers/virtio/virtio_pci_legacy.c
> > @@ -97,8 +97,8 @@ static void vp_reset(struct virtio_device *vdev)
> >  	/* Flush out the status write, and flush in device writes,
> >  	 * including MSi-X interrupts, if any. */
> >  	ioread8(vp_dev->ioaddr + VIRTIO_PCI_STATUS);
> > -	/* Flush pending VQ/configuration callbacks. */
> > -	vp_synchronize_vectors(vdev);
> > +	/* Disable VQ/configuration callbacks. */
> > +	vp_disable_vectors(vdev);
> >  }
> >  
> >  static u16 vp_config_vector(struct virtio_pci_device *vp_dev, u16 vector)
> > @@ -194,6 +194,7 @@ static void del_vq(struct virtio_pci_vq_info *info)
> >  }
> >  
> >  static const struct virtio_config_ops virtio_pci_config_ops = {
> > +	.ready		= vp_enable_vectors,
> >  	.get		= vp_get,
> >  	.set		= vp_set,
> >  	.get_status	= vp_get_status,
> > diff --git a/drivers/virtio/virtio_pci_modern.c b/drivers/virtio/virtio_pci_modern.c
> > index 30654d3a0b41..acf0f6b6381d 100644
> > --- a/drivers/virtio/virtio_pci_modern.c
> > +++ b/drivers/virtio/virtio_pci_modern.c
> > @@ -172,8 +172,8 @@ static void vp_reset(struct virtio_device *vdev)
> >  	 */
> >  	while (vp_modern_get_status(mdev))
> >  		msleep(1);
> > -	/* Flush pending VQ/configuration callbacks. */
> > -	vp_synchronize_vectors(vdev);
> > +	/* Disable VQ/configuration callbacks. */
> > +	vp_disable_vectors(vdev);
> >  }
> >  
> >  static u16 vp_config_vector(struct virtio_pci_device *vp_dev, u16 vector)
> > @@ -380,6 +380,7 @@ static bool vp_get_shm_region(struct virtio_device *vdev,
> >  }
> >  
> >  static const struct virtio_config_ops virtio_pci_config_nodev_ops = {
> > +	.ready		= vp_enable_vectors,
> >  	.get		= NULL,
> >  	.set		= NULL,
> >  	.generation	= vp_generation,
> > @@ -397,6 +398,7 @@ static const struct virtio_config_ops virtio_pci_config_nodev_ops = {
> >  };
> >  
> >  static const struct virtio_config_ops virtio_pci_config_ops = {
> > +	.ready		= vp_enable_vectors,
> >  	.get		= vp_get,
> >  	.set		= vp_set,
> >  	.generation	= vp_generation,
> > 

_______________________________________________
Virtualization mailing list
Virtualization@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linuxfoundation.org/mailman/listinfo/virtualization



[Index of Archives]     [KVM Development]     [Libvirt Development]     [Libvirt Users]     [CentOS Virtualization]     [Netdev]     [Ethernet Bridging]     [Linux Wireless]     [Kernel Newbies]     [Security]     [Linux for Hams]     [Netfilter]     [Bugtraq]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux Admin]     [Samba]

  Powered by Linux