On Wed, Sep 29, 2021 at 06:05:07PM -0700, Kuppuswamy Sathyanarayanan wrote: > While the common case for device-authorization is to skip probe of > unauthorized devices, some buses may still want to emit a message on > probe failure (Thunderbolt), or base probe failures on the > authorization status of a related device like a parent (USB). So add > an option (has_probe_authorization) in struct bus_type for the bus > driver to own probe authorization policy. > > Reviewed-by: Dan Williams <dan.j.williams@xxxxxxxxx> > Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@xxxxxxxxxxxxxxx> So what e.g. the PCI patch https://lore.kernel.org/all/CACK8Z6E8pjVeC934oFgr=VB3pULx_GyT2NkzAogdRQJ9TKSX9A@xxxxxxxxxxxxxx/ actually proposes is a list of allowed drivers, not devices. Doing it at the device level has disadvantages, for example some devices might have a legacy unsafe driver, or an out of tree driver. It also does not address drivers that poke at hardware during init. Accordingly, I think the right thing to do is to skip driver init for disallowed drivers, not skip probe for specific devices. > --- > drivers/base/dd.c | 5 +++++ > drivers/thunderbolt/domain.c | 1 + > drivers/usb/core/driver.c | 1 + > include/linux/device/bus.h | 4 ++++ > 4 files changed, 11 insertions(+) > > diff --git a/drivers/base/dd.c b/drivers/base/dd.c > index 68ea1f949daa..0cd03ac7d3b1 100644 > --- a/drivers/base/dd.c > +++ b/drivers/base/dd.c > @@ -544,6 +544,11 @@ static int really_probe(struct device *dev, struct device_driver *drv) > !drv->suppress_bind_attrs; > int ret; > > + if (!dev->authorized && !dev->bus->has_probe_authorization) { > + dev_dbg(dev, "Device is not authorized\n"); > + return -ENODEV; > + } > + > if (defer_all_probes) { > /* > * Value of defer_all_probes can be set only by > diff --git a/drivers/thunderbolt/domain.c b/drivers/thunderbolt/domain.c > index 3e39686eff14..6de8a366b796 100644 > --- a/drivers/thunderbolt/domain.c > +++ b/drivers/thunderbolt/domain.c > @@ -321,6 +321,7 @@ struct bus_type tb_bus_type = { > .probe = tb_service_probe, > .remove = tb_service_remove, > .shutdown = tb_service_shutdown, > + .has_probe_authorization = true, > }; > > static void tb_domain_release(struct device *dev) > diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c > index fb476665f52d..f57b5a7a90ca 100644 > --- a/drivers/usb/core/driver.c > +++ b/drivers/usb/core/driver.c > @@ -2028,4 +2028,5 @@ struct bus_type usb_bus_type = { > .match = usb_device_match, > .uevent = usb_uevent, > .need_parent_lock = true, > + .has_probe_authorization = true, > }; > diff --git a/include/linux/device/bus.h b/include/linux/device/bus.h > index 062777a45a74..571a2f6e7c1d 100644 > --- a/include/linux/device/bus.h > +++ b/include/linux/device/bus.h > @@ -69,6 +69,9 @@ struct fwnode_handle; > * @lock_key: Lock class key for use by the lock validator > * @need_parent_lock: When probing or removing a device on this bus, the > * device core should lock the device's parent. > + * @has_probe_authorization: Set true to indicate to the driver-core to skip > + * the authorization checks and let bus drivers > + * handle it locally. > * > * A bus is a channel between the processor and one or more devices. For the > * purposes of the device model, all devices are connected via a bus, even if > @@ -112,6 +115,7 @@ struct bus_type { > struct lock_class_key lock_key; > > bool need_parent_lock; > + bool has_probe_authorization; > }; > > extern int __must_check bus_register(struct bus_type *bus); > -- > 2.25.1 _______________________________________________ Virtualization mailing list Virtualization@xxxxxxxxxxxxxxxxxxxxxxxxxx https://lists.linuxfoundation.org/mailman/listinfo/virtualization
