On Wed, 16 Jun 2021 17:26:33 +0800, Jason Wang <jasowang@xxxxxxxxxx> wrote:
>
> 在 2021/6/10 下午4:22, Xuan Zhuo 写道:
> > AF_XDP(xdp socket, xsk) is a high-performance packet receiving and
> > sending technology.
> >
> > This patch implements the binding and unbinding operations of xsk and
> > the virtio-net queue for xsk zero copy xmit.
> >
> > The xsk zero copy xmit depends on tx napi. Because the actual sending
> > of data is done in the process of tx napi. If tx napi does not
> > work, then the data of the xsk tx queue will not be sent.
> > So if tx napi is not true, an error will be reported when bind xsk.
> >
> > If xsk is active, it will prevent ethtool from modifying tx napi.
> >
> > When reclaiming ptr, a new type of ptr is added, which is distinguished
> > based on the last two digits of ptr:
> > 00: skb
> > 01: xdp frame
> > 10: xsk xmit ptr
> >
> > All sent xsk packets share the virtio-net header of xsk_hdr. If xsk
> > needs to support csum and other functions later, consider assigning xsk
> > hdr separately for each sent packet.
> >
> > Different from other physical network cards, you can reinitialize the
> > channel when you bind xsk. And vrtio does not support independent reset
> > channel, you can only reset the entire device. I think it is not
> > appropriate for us to directly reset the entire setting. So the
> > situation becomes a bit more complicated. We have to consider how
> > to deal with the buffer referenced in vq after xsk is unbind.
> >
> > I added the ring size struct virtnet_xsk_ctx when xsk been bind. Each xsk
> > buffer added to vq corresponds to a ctx. This ctx is used to record the
> > page where the xsk buffer is located, and add a page reference. When the
> > buffer is recycling, reduce the reference to page. When xsk has been
> > unbind, and all related xsk buffers have been recycled, release all ctx.
> >
> > Signed-off-by: Xuan Zhuo <xuanzhuo@xxxxxxxxxxxxxxxxx>
> > Reviewed-by: Dust Li <dust.li@xxxxxxxxxxxxxxxxx>
> > ---
> > drivers/net/virtio/Makefile | 1 +
> > drivers/net/virtio/virtio_net.c | 20 +-
> > drivers/net/virtio/virtio_net.h | 37 +++-
> > drivers/net/virtio/xsk.c | 346 ++++++++++++++++++++++++++++++++
> > drivers/net/virtio/xsk.h | 99 +++++++++
> > 5 files changed, 497 insertions(+), 6 deletions(-)
> > create mode 100644 drivers/net/virtio/xsk.c
> > create mode 100644 drivers/net/virtio/xsk.h
> >
> > diff --git a/drivers/net/virtio/Makefile b/drivers/net/virtio/Makefile
> > index ccc80f40f33a..db79d2e7925f 100644
> > --- a/drivers/net/virtio/Makefile
> > +++ b/drivers/net/virtio/Makefile
> > @@ -4,3 +4,4 @@
> > #
> >
> > obj-$(CONFIG_VIRTIO_NET) += virtio_net.o
> > +obj-$(CONFIG_VIRTIO_NET) += xsk.o
> > diff --git a/drivers/net/virtio/virtio_net.c b/drivers/net/virtio/virtio_net.c
> > index 395ec1f18331..40d7751f1c5f 100644
> > --- a/drivers/net/virtio/virtio_net.c
> > +++ b/drivers/net/virtio/virtio_net.c
> > @@ -1423,6 +1423,7 @@ static int virtnet_poll_tx(struct napi_struct *napi, int budget)
> >
> > txq = netdev_get_tx_queue(vi->dev, index);
> > __netif_tx_lock(txq, raw_smp_processor_id());
> > + work_done += virtnet_poll_xsk(sq, budget);
> > free_old_xmit(sq, true);
> > __netif_tx_unlock(txq);
> >
> > @@ -2133,8 +2134,16 @@ static int virtnet_set_coalesce(struct net_device *dev,
> > if (napi_weight ^ vi->sq[0].napi.weight) {
> > if (dev->flags & IFF_UP)
> > return -EBUSY;
> > - for (i = 0; i < vi->max_queue_pairs; i++)
> > +
> > + for (i = 0; i < vi->max_queue_pairs; i++) {
> > + /* xsk xmit depend on the tx napi. So if xsk is active,
> > + * prevent modifications to tx napi.
> > + */
> > + if (rtnl_dereference(vi->sq[i].xsk.pool))
> > + continue;
>
>
> So this can result tx NAPI is used by some queues buy not the others. I
> think such inconsistency breaks the semantic of set_coalesce() which
> assumes the operation is done at the device not some specific queues.
>
> How about just fail here?
>
>
> > +
> > vi->sq[i].napi.weight = napi_weight;
> > + }
> > }
> >
> > return 0;
> > @@ -2407,6 +2416,8 @@ static int virtnet_xdp(struct net_device *dev, struct netdev_bpf *xdp)
> > switch (xdp->command) {
> > case XDP_SETUP_PROG:
> > return virtnet_xdp_set(dev, xdp->prog, xdp->extack);
> > + case XDP_SETUP_XSK_POOL:
> > + return virtnet_xsk_pool_setup(dev, xdp);
> > default:
> > return -EINVAL;
> > }
> > @@ -2466,6 +2477,7 @@ static const struct net_device_ops virtnet_netdev = {
> > .ndo_vlan_rx_kill_vid = virtnet_vlan_rx_kill_vid,
> > .ndo_bpf = virtnet_xdp,
> > .ndo_xdp_xmit = virtnet_xdp_xmit,
> > + .ndo_xsk_wakeup = virtnet_xsk_wakeup,
> > .ndo_features_check = passthru_features_check,
> > .ndo_get_phys_port_name = virtnet_get_phys_port_name,
> > .ndo_set_features = virtnet_set_features,
> > @@ -2569,10 +2581,12 @@ static void free_unused_bufs(struct virtnet_info *vi)
> > for (i = 0; i < vi->max_queue_pairs; i++) {
> > struct virtqueue *vq = vi->sq[i].vq;
> > while ((buf = virtqueue_detach_unused_buf(vq)) != NULL) {
> > - if (!is_xdp_frame(buf))
> > + if (is_skb_ptr(buf))
> > dev_kfree_skb(buf);
> > - else
> > + else if (is_xdp_frame(buf))
> > xdp_return_frame(ptr_to_xdp(buf));
> > + else
> > + virtnet_xsk_ctx_tx_put(ptr_to_xsk(buf));
> > }
> > }
> >
> > diff --git a/drivers/net/virtio/virtio_net.h b/drivers/net/virtio/virtio_net.h
> > index 931cc81f92fb..e3da829887dc 100644
> > --- a/drivers/net/virtio/virtio_net.h
> > +++ b/drivers/net/virtio/virtio_net.h
> > @@ -135,6 +135,16 @@ struct send_queue {
> > struct virtnet_sq_stats stats;
> >
> > struct napi_struct napi;
> > +
> > + struct {
> > + struct xsk_buff_pool __rcu *pool;
> > +
> > + /* xsk wait for tx inter or softirq */
> > + bool need_wakeup;
> > +
> > + /* ctx used to record the page added to vq */
> > + struct virtnet_xsk_ctx_head *ctx_head;
> > + } xsk;
> > };
> >
> > /* Internal representation of a receive virtqueue */
> > @@ -188,6 +198,13 @@ static inline void virtqueue_napi_schedule(struct napi_struct *napi,
> > }
> > }
> >
> > +#include "xsk.h"
> > +
> > +static inline bool is_skb_ptr(void *ptr)
> > +{
> > + return !((unsigned long)ptr & (VIRTIO_XDP_FLAG | VIRTIO_XSK_FLAG));
> > +}
> > +
> > static inline bool is_xdp_frame(void *ptr)
> > {
> > return (unsigned long)ptr & VIRTIO_XDP_FLAG;
> > @@ -206,25 +223,39 @@ static inline struct xdp_frame *ptr_to_xdp(void *ptr)
> > static inline void __free_old_xmit(struct send_queue *sq, bool in_napi,
> > struct virtnet_sq_stats *stats)
> > {
> > + unsigned int xsknum = 0;
> > unsigned int len;
> > void *ptr;
> >
> > while ((ptr = virtqueue_get_buf(sq->vq, &len)) != NULL) {
> > - if (!is_xdp_frame(ptr)) {
> > + if (is_skb_ptr(ptr)) {
> > struct sk_buff *skb = ptr;
> >
> > pr_debug("Sent skb %p\n", skb);
> >
> > stats->bytes += skb->len;
> > napi_consume_skb(skb, in_napi);
> > - } else {
> > + } else if (is_xdp_frame(ptr)) {
> > struct xdp_frame *frame = ptr_to_xdp(ptr);
> >
> > stats->bytes += frame->len;
> > xdp_return_frame(frame);
> > + } else {
> > + struct virtnet_xsk_ctx_tx *ctx;
> > +
> > + ctx = ptr_to_xsk(ptr);
> > +
> > + /* Maybe this ptr was sent by the last xsk. */
> > + if (ctx->ctx.head->active)
> > + ++xsknum;
> > +
> > + stats->bytes += ctx->len;
> > + virtnet_xsk_ctx_tx_put(ctx);
> > }
> > stats->packets++;
> > }
> > -}
> >
> > + if (xsknum)
> > + virtnet_xsk_complete(sq, xsknum);
> > +}
> > #endif
> > diff --git a/drivers/net/virtio/xsk.c b/drivers/net/virtio/xsk.c
> > new file mode 100644
> > index 000000000000..f98b68576709
> > --- /dev/null
> > +++ b/drivers/net/virtio/xsk.c
> > @@ -0,0 +1,346 @@
> > +// SPDX-License-Identifier: GPL-2.0-or-later
> > +/*
> > + * virtio-net xsk
> > + */
> > +
> > +#include "virtio_net.h"
> > +
> > +static struct virtio_net_hdr_mrg_rxbuf xsk_hdr;
> > +
> > +static struct virtnet_xsk_ctx *virtnet_xsk_ctx_get(struct virtnet_xsk_ctx_head *head)
> > +{
> > + struct virtnet_xsk_ctx *ctx;
> > +
> > + ctx = head->ctx;
> > + head->ctx = ctx->next;
> > +
> > + ++head->ref;
> > +
> > + return ctx;
> > +}
> > +
> > +#define virtnet_xsk_ctx_tx_get(head) ((struct virtnet_xsk_ctx_tx *)virtnet_xsk_ctx_get(head))
> > +
> > +static void virtnet_xsk_check_queue(struct send_queue *sq)
> > +{
> > + struct virtnet_info *vi = sq->vq->vdev->priv;
> > + struct net_device *dev = vi->dev;
> > + int qnum = sq - vi->sq;
> > +
> > + /* If it is a raw buffer queue, it does not check whether the status
> > + * of the queue is stopped when sending. So there is no need to check
> > + * the situation of the raw buffer queue.
> > + */
> > + if (is_xdp_raw_buffer_queue(vi, qnum))
> > + return;
> > +
> > + /* If this sq is not the exclusive queue of the current cpu,
> > + * then it may be called by start_xmit, so check it running out
> > + * of space.
> > + *
> > + * Stop the queue to avoid getting packets that we are
> > + * then unable to transmit. Then wait the tx interrupt.
> > + */
> > + if (sq->vq->num_free < 2 + MAX_SKB_FRAGS)
> > + netif_stop_subqueue(dev, qnum);
> > +}
> > +
> > +void virtnet_xsk_complete(struct send_queue *sq, u32 num)
> > +{
> > + struct xsk_buff_pool *pool;
> > +
> > + rcu_read_lock();
> > + pool = rcu_dereference(sq->xsk.pool);
> > + if (!pool) {
> > + rcu_read_unlock();
> > + return;
> > + }
> > + xsk_tx_completed(pool, num);
> > + rcu_read_unlock();
> > +
> > + if (sq->xsk.need_wakeup) {
> > + sq->xsk.need_wakeup = false;
> > + virtqueue_napi_schedule(&sq->napi, sq->vq);
> > + }
> > +}
> > +
> > +static int virtnet_xsk_xmit(struct send_queue *sq, struct xsk_buff_pool *pool,
> > + struct xdp_desc *desc)
> > +{
> > + struct virtnet_xsk_ctx_tx *ctx;
> > + struct virtnet_info *vi;
> > + u32 offset, n, len;
> > + struct page *page;
> > + void *data;
> > +
> > + vi = sq->vq->vdev->priv;
> > +
> > + data = xsk_buff_raw_get_data(pool, desc->addr);
> > + offset = offset_in_page(data);
> > +
> > + ctx = virtnet_xsk_ctx_tx_get(sq->xsk.ctx_head);
> > +
> > + /* xsk unaligned mode, desc may use two pages */
> > + if (desc->len > PAGE_SIZE - offset)
> > + n = 3;
> > + else
> > + n = 2;
> > +
> > + sg_init_table(sq->sg, n);
> > + sg_set_buf(sq->sg, &xsk_hdr, vi->hdr_len);
> > +
> > + /* handle for xsk first page */
> > + len = min_t(int, desc->len, PAGE_SIZE - offset);
> > + page = vmalloc_to_page(data);
> > + sg_set_page(sq->sg + 1, page, len, offset);
> > +
> > + /* ctx is used to record and reference this page to prevent xsk from
> > + * being released before this xmit is recycled
> > + */
>
>
> I'm a little bit surprised that this is done manually per device instead
> of doing it in xsk core.
>
>
> > + ctx->ctx.page = page;
> > + get_page(page);
> > +
> > + /* xsk unaligned mode, handle for the second page */
> > + if (len < desc->len) {
> > + page = vmalloc_to_page(data + len);
> > + len = min_t(int, desc->len - len, PAGE_SIZE);
> > + sg_set_page(sq->sg + 2, page, len, 0);
> > +
> > + ctx->ctx.page_unaligned = page;
> > + get_page(page);
> > + } else {
> > + ctx->ctx.page_unaligned = NULL;
> > + }
> > +
> > + return virtqueue_add_outbuf(sq->vq, sq->sg, n,
> > + xsk_to_ptr(ctx), GFP_ATOMIC);
> > +}
> > +
> > +static int virtnet_xsk_xmit_batch(struct send_queue *sq,
> > + struct xsk_buff_pool *pool,
> > + unsigned int budget,
> > + bool in_napi, int *done,
> > + struct virtnet_sq_stats *stats)
> > +{
> > + struct xdp_desc desc;
> > + int err, packet = 0;
> > + int ret = -EAGAIN;
> > +
> > + while (budget-- > 0) {
> > + if (sq->vq->num_free < 2 + MAX_SKB_FRAGS) {
>
>
> AF_XDP doesn't use skb, so I don't see why MAX_SKB_FRAGS is used.
>
> Looking at virtnet_xsk_xmit(), it looks to me 3 is more suitable here.
> Or did AF_XDP core can handle queue full gracefully then we don't even
> need to worry about this?
>
>
> > + ret = -EBUSY;
>
>
> -ENOSPC looks better.
>
>
> > + break;
> > + }
> > +
> > + if (!xsk_tx_peek_desc(pool, &desc)) {
> > + /* done */
> > + ret = 0;
> > + break;
> > + }
> > +
> > + err = virtnet_xsk_xmit(sq, pool, &desc);
> > + if (unlikely(err)) {
>
>
> If we always reserve sufficient slots, this should be an unexpected
> error, do we need log this as what has been done in start_xmit()?
>
> /* This should not happen! */
> if (unlikely(err)) {
> dev->stats.tx_fifo_errors++;
> if (net_ratelimit())
> dev_warn(&dev->dev,
> "Unexpected TXQ (%d) queue failure: %d\n",
> qnum, err);
>
>
> > + ret = -EBUSY;
> > + break;
> > + }
> > +
> > + ++packet;
> > + }
> > +
> > + if (packet) {
> > + if (virtqueue_kick_prepare(sq->vq) && virtqueue_notify(sq->vq))
> > + ++stats->kicks;
> > +
> > + *done += packet;
> > + stats->xdp_tx += packet;
> > +
> > + xsk_tx_release(pool);
> > + }
> > +
> > + return ret;
> > +}
> > +
> > +static int virtnet_xsk_run(struct send_queue *sq, struct xsk_buff_pool *pool,
> > + int budget, bool in_napi)
> > +{
> > + struct virtnet_sq_stats stats = {};
> > + int done = 0;
> > + int err;
> > +
> > + sq->xsk.need_wakeup = false;
> > + __free_old_xmit(sq, in_napi, &stats);
> > +
> > + /* return err:
> > + * -EAGAIN: done == budget
> > + * -EBUSY: done < budget
> > + * 0 : done < budget
> > + */
>
>
> It's better to move the comment to the implementation of
> virtnet_xsk_xmit_batch().
>
>
> > +xmit:
> > + err = virtnet_xsk_xmit_batch(sq, pool, budget - done, in_napi,
> > + &done, &stats);
> > + if (err == -EBUSY) {
> > + __free_old_xmit(sq, in_napi, &stats);
> > +
> > + /* If the space is enough, let napi run again. */
> > + if (sq->vq->num_free >= 2 + MAX_SKB_FRAGS)
>
>
> The comment does not match the code.
>
>
> > + goto xmit;
> > + else
> > + sq->xsk.need_wakeup = true;
> > + }
> > +
> > + virtnet_xsk_check_queue(sq);
> > +
> > + u64_stats_update_begin(&sq->stats.syncp);
> > + sq->stats.packets += stats.packets;
> > + sq->stats.bytes += stats.bytes;
> > + sq->stats.kicks += stats.kicks;
> > + sq->stats.xdp_tx += stats.xdp_tx;
> > + u64_stats_update_end(&sq->stats.syncp);
> > +
> > + return done;
> > +}
> > +
> > +int virtnet_poll_xsk(struct send_queue *sq, int budget)
> > +{
> > + struct xsk_buff_pool *pool;
> > + int work_done = 0;
> > +
> > + rcu_read_lock();
> > + pool = rcu_dereference(sq->xsk.pool);
> > + if (pool)
> > + work_done = virtnet_xsk_run(sq, pool, budget, true);
> > + rcu_read_unlock();
> > + return work_done;
> > +}
> > +
> > +int virtnet_xsk_wakeup(struct net_device *dev, u32 qid, u32 flag)
> > +{
> > + struct virtnet_info *vi = netdev_priv(dev);
> > + struct xsk_buff_pool *pool;
> > + struct send_queue *sq;
> > +
> > + if (!netif_running(dev))
> > + return -ENETDOWN;
> > +
> > + if (qid >= vi->curr_queue_pairs)
> > + return -EINVAL;
>
>
> I wonder how we can hit this check. Note that we prevent the user from
> modifying queue pairs when XDP is enabled:
>
> /* For now we don't support modifying channels while XDP is loaded
> * also when XDP is loaded all RX queues have XDP programs so
> we only
> * need to check a single RX queue.
> */
> if (vi->rq[0].xdp_prog)
> return -EINVAL;
>
> > +
> > + sq = &vi->sq[qid];
> > +
> > + rcu_read_lock();
>
>
> Can we simply use rcu_read_lock_bh() here?
>
>
> > + pool = rcu_dereference(sq->xsk.pool);
> > + if (pool) {
> > + local_bh_disable();
> > + virtqueue_napi_schedule(&sq->napi, sq->vq);
> > + local_bh_enable();
> > + }
> > + rcu_read_unlock();
> > + return 0;
> > +}
> > +
> > +static struct virtnet_xsk_ctx_head *virtnet_xsk_ctx_alloc(struct xsk_buff_pool *pool,
> > + struct virtqueue *vq)
> > +{
> > + struct virtnet_xsk_ctx_head *head;
> > + u32 size, n, ring_size, ctx_sz;
> > + struct virtnet_xsk_ctx *ctx;
> > + void *p;
> > +
> > + ctx_sz = sizeof(struct virtnet_xsk_ctx_tx);
> > +
> > + ring_size = virtqueue_get_vring_size(vq);
> > + size = sizeof(*head) + ctx_sz * ring_size;
> > +
> > + head = kmalloc(size, GFP_ATOMIC);
> > + if (!head)
> > + return NULL;
> > +
> > + memset(head, 0, sizeof(*head));
> > +
> > + head->active = true;
> > + head->frame_size = xsk_pool_get_rx_frame_size(pool);
> > +
> > + p = head + 1;
> > + for (n = 0; n < ring_size; ++n) {
> > + ctx = p;
> > + ctx->head = head;
> > + ctx->next = head->ctx;
> > + head->ctx = ctx;
> > +
> > + p += ctx_sz;
> > + }
> > +
> > + return head;
> > +}
> > +
> > +static int virtnet_xsk_pool_enable(struct net_device *dev,
> > + struct xsk_buff_pool *pool,
> > + u16 qid)
> > +{
> > + struct virtnet_info *vi = netdev_priv(dev);
> > + struct send_queue *sq;
> > +
> > + if (qid >= vi->curr_queue_pairs)
> > + return -EINVAL;
> > +
> > + sq = &vi->sq[qid];
> > +
> > + /* xsk zerocopy depend on the tx napi.
> > + *
> > + * All data is actually consumed and sent out from the xsk tx queue
> > + * under the tx napi mechanism.
> > + */
> > + if (!sq->napi.weight)
> > + return -EPERM;
> > +
> > + memset(&sq->xsk, 0, sizeof(sq->xsk));
> > +
> > + sq->xsk.ctx_head = virtnet_xsk_ctx_alloc(pool, sq->vq);
> > + if (!sq->xsk.ctx_head)
> > + return -ENOMEM;
> > +
> > + /* Here is already protected by rtnl_lock, so rcu_assign_pointer is
> > + * safe.
> > + */
> > + rcu_assign_pointer(sq->xsk.pool, pool);
> > +
> > + return 0;
> > +}
> > +
> > +static int virtnet_xsk_pool_disable(struct net_device *dev, u16 qid)
> > +{
> > + struct virtnet_info *vi = netdev_priv(dev);
> > + struct send_queue *sq;
> > +
> > + if (qid >= vi->curr_queue_pairs)
> > + return -EINVAL;
> > +
> > + sq = &vi->sq[qid];
> > +
> > + /* Here is already protected by rtnl_lock, so rcu_assign_pointer is
> > + * safe.
> > + */
> > + rcu_assign_pointer(sq->xsk.pool, NULL);
> > +
> > + /* Sync with the XSK wakeup and with NAPI. */
> > + synchronize_net();
> > +
> > + if (READ_ONCE(sq->xsk.ctx_head->ref))
> > + WRITE_ONCE(sq->xsk.ctx_head->active, false);
> > + else
> > + kfree(sq->xsk.ctx_head);
> > +
> > + sq->xsk.ctx_head = NULL;
> > +
> > + return 0;
> > +}
> > +
> > +int virtnet_xsk_pool_setup(struct net_device *dev, struct netdev_bpf *xdp)
> > +{
> > + if (xdp->xsk.pool)
> > + return virtnet_xsk_pool_enable(dev, xdp->xsk.pool,
> > + xdp->xsk.queue_id);
> > + else
> > + return virtnet_xsk_pool_disable(dev, xdp->xsk.queue_id);
> > +}
> > +
> > diff --git a/drivers/net/virtio/xsk.h b/drivers/net/virtio/xsk.h
> > new file mode 100644
> > index 000000000000..54948e0b07fc
> > --- /dev/null
> > +++ b/drivers/net/virtio/xsk.h
> > @@ -0,0 +1,99 @@
> > +/* SPDX-License-Identifier: GPL-2.0-or-later */
> > +
> > +#ifndef __XSK_H__
> > +#define __XSK_H__
> > +
> > +#define VIRTIO_XSK_FLAG BIT(1)
> > +
> > +/* When xsk disable, under normal circumstances, the network card must reclaim
> > + * all the memory that has been sent and the memory added to the rq queue by
> > + * destroying the queue.
> > + *
> > + * But virtio's queue does not support separate setting to been disable.
>
>
> This is a call for us to implement per queue enable/disable. Virtio-mmio
> has such facility but virtio-pci only allow to disable a queue (not enable).
>
>
> > "Reset"
> > + * is not very suitable.
> > + *
> > + * The method here is that each sent chunk or chunk added to the rq queue is
> > + * described by an independent structure struct virtnet_xsk_ctx.
> > + *
> > + * We will use get_page(page) to refer to the page where these chunks are
> > + * located. And these pages will be recorded in struct virtnet_xsk_ctx. So these
> > + * chunks in vq are safe. When recycling, put the these page.
> > + *
> > + * These structures point to struct virtnet_xsk_ctx_head, and ref records how
> > + * many chunks have not been reclaimed. If active == 0, it means that xsk has
> > + * been disabled.
> > + *
> > + * In this way, even if xsk has been unbundled with rq/sq, or a new xsk and
> > + * rq/sq are bound, and a new virtnet_xsk_ctx_head is created. It will not
> > + * affect the old virtnet_xsk_ctx to be recycled. And free all head and ctx when
> > + * ref is 0.
>
>
> This looks complicated and it will increase the footprint. Consider the
> performance penalty and the complexity, I would suggest to use reset
> instead.
>
> Then we don't need to introduce such context.
I don't like this either. It is best if we can reset the queue, but then,
according to my understanding, the backend should also be supported
synchronously, so if you don't update the backend synchronously, you can't use
xsk.
I don’t think resetting the entire dev is a good solution. If you want to bind
xsk to 10 queues, you may have to reset the entire device 10 times. I don’t
think this is a good way. But the current spec does not support reset single
queue, so I chose the current solution.
Jason, what do you think we are going to do? Realize the reset function of a
single queue?
Looking forward to your reply!!!
Thanks
>
> Thanks
>
>
> > + */
> > +struct virtnet_xsk_ctx;
> > +struct virtnet_xsk_ctx_head {
> > + struct virtnet_xsk_ctx *ctx;
> > +
> > + /* how many ctx has been add to vq */
> > + u64 ref;
> > +
> > + unsigned int frame_size;
> > +
> > + /* the xsk status */
> > + bool active;
> > +};
> > +
> > +struct virtnet_xsk_ctx {
> > + struct virtnet_xsk_ctx_head *head;
> > + struct virtnet_xsk_ctx *next;
> > +
> > + struct page *page;
> > +
> > + /* xsk unaligned mode will use two page in one desc */
> > + struct page *page_unaligned;
> > +};
> > +
> > +struct virtnet_xsk_ctx_tx {
> > + /* this *MUST* be the first */
> > + struct virtnet_xsk_ctx ctx;
> > +
> > + /* xsk tx xmit use this record the len of packet */
> > + u32 len;
> > +};
> > +
> > +static inline void *xsk_to_ptr(struct virtnet_xsk_ctx_tx *ctx)
> > +{
> > + return (void *)((unsigned long)ctx | VIRTIO_XSK_FLAG);
> > +}
> > +
> > +static inline struct virtnet_xsk_ctx_tx *ptr_to_xsk(void *ptr)
> > +{
> > + unsigned long p;
> > +
> > + p = (unsigned long)ptr;
> > + return (struct virtnet_xsk_ctx_tx *)(p & ~VIRTIO_XSK_FLAG);
> > +}
> > +
> > +static inline void virtnet_xsk_ctx_put(struct virtnet_xsk_ctx *ctx)
> > +{
> > + put_page(ctx->page);
> > + if (ctx->page_unaligned)
> > + put_page(ctx->page_unaligned);
> > +
> > + --ctx->head->ref;
> > +
> > + if (ctx->head->active) {
> > + ctx->next = ctx->head->ctx;
> > + ctx->head->ctx = ctx;
> > + } else {
> > + if (!ctx->head->ref)
> > + kfree(ctx->head);
> > + }
> > +}
> > +
> > +#define virtnet_xsk_ctx_tx_put(ctx) \
> > + virtnet_xsk_ctx_put((struct virtnet_xsk_ctx *)ctx)
> > +
> > +int virtnet_xsk_wakeup(struct net_device *dev, u32 qid, u32 flag);
> > +int virtnet_poll_xsk(struct send_queue *sq, int budget);
> > +void virtnet_xsk_complete(struct send_queue *sq, u32 num);
> > +int virtnet_xsk_pool_setup(struct net_device *dev, struct netdev_bpf *xdp);
> > +#endif
>
_______________________________________________
Virtualization mailing list
Virtualization@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
