On Tue, Jun 08, 2021 at 12:40:39PM +0300, Arseny Krasnov wrote:
On 08.06.2021 11:23, Stefano Garzarella wrote:
On Mon, Jun 07, 2021 at 04:18:38PM +0300, Arseny Krasnov wrote:
On 07.06.2021 14:04, Stefano Garzarella wrote:
On Fri, Jun 04, 2021 at 09:03:26PM +0300, Arseny Krasnov wrote:
On 04.06.2021 18:03, Stefano Garzarella wrote:
On Fri, Jun 04, 2021 at 04:12:23PM +0300, Arseny Krasnov wrote:
On 03.06.2021 17:45, Stefano Garzarella wrote:
On Thu, May 20, 2021 at 10:17:58PM +0300, Arseny Krasnov wrote:
Callback fetches RW packets from rx queue of socket until whole record
is copied(if user's buffer is full, user is not woken up). This is done
to not stall sender, because if we wake up user and it leaves syscall,
nobody will send credit update for rest of record, and sender will wait
for next enter of read syscall at receiver's side. So if user buffer is
full, we just send credit update and drop data.
Signed-off-by: Arseny Krasnov <arseny.krasnov@xxxxxxxxxxxxx>
---
v9 -> v10:
1) Number of dequeued bytes incremented even in case when
user's buffer is full.
2) Use 'msg_data_left()' instead of direct access to 'msg_hdr'.
3) Rename variable 'err' to 'dequeued_len', in case of error
it has negative value.
include/linux/virtio_vsock.h | 5 ++
net/vmw_vsock/virtio_transport_common.c | 65 +++++++++++++++++++++++++
2 files changed, 70 insertions(+)
diff --git a/include/linux/virtio_vsock.h b/include/linux/virtio_vsock.h
index dc636b727179..02acf6e9ae04 100644
--- a/include/linux/virtio_vsock.h
+++ b/include/linux/virtio_vsock.h
@@ -80,6 +80,11 @@ virtio_transport_dgram_dequeue(struct vsock_sock *vsk,
struct msghdr *msg,
size_t len, int flags);
+ssize_t
+virtio_transport_seqpacket_dequeue(struct vsock_sock *vsk,
+ struct msghdr *msg,
+ int flags,
+ bool *msg_ready);
s64 virtio_transport_stream_has_data(struct vsock_sock *vsk);
s64 virtio_transport_stream_has_space(struct vsock_sock *vsk);
diff --git a/net/vmw_vsock/virtio_transport_common.c b/net/vmw_vsock/virtio_transport_common.c
index ad0d34d41444..61349b2ea7fe 100644
--- a/net/vmw_vsock/virtio_transport_common.c
+++ b/net/vmw_vsock/virtio_transport_common.c
@@ -393,6 +393,59 @@ virtio_transport_stream_do_dequeue(struct vsock_sock *vsk,
return err;
}
+static int virtio_transport_seqpacket_do_dequeue(struct vsock_sock *vsk,
+ struct msghdr *msg,
+ int flags,
+ bool *msg_ready)
+{
+ struct virtio_vsock_sock *vvs = vsk->trans;
+ struct virtio_vsock_pkt *pkt;
+ int dequeued_len = 0;
+ size_t user_buf_len = msg_data_left(msg);
+
+ *msg_ready = false;
+ spin_lock_bh(&vvs->rx_lock);
+
+ while (!*msg_ready && !list_empty(&vvs->rx_queue) && dequeued_len >= 0) {
I'
+ size_t bytes_to_copy;
+ size_t pkt_len;
+
+ pkt = list_first_entry(&vvs->rx_queue, struct virtio_vsock_pkt, list);
+ pkt_len = (size_t)le32_to_cpu(pkt->hdr.len);
+ bytes_to_copy = min(user_buf_len, pkt_len);
+
+ if (bytes_to_copy) {
+ /* sk_lock is held by caller so no one else can dequeue.
+ * Unlock rx_lock since memcpy_to_msg() may sleep.
+ */
+ spin_unlock_bh(&vvs->rx_lock);
+
+ if (memcpy_to_msg(msg, pkt->buf, bytes_to_copy))
+ dequeued_len = -EINVAL;
I think here is better to return the error returned by memcpy_to_msg(),
as we do in the other place where we use memcpy_to_msg().
I mean something like this:
err = memcpy_to_msgmsg, pkt->buf, bytes_to_copy);
if (err)
dequeued_len = err;
Ack
+ else
+ user_buf_len -= bytes_to_copy;
+
+ spin_lock_bh(&vvs->rx_lock);
+ }
+
Maybe here we can simply break the cycle if we have an error:
if (dequeued_len < 0)
break;
Or we can refactor a bit, simplifying the while() condition and also the
code in this way (not tested):
while (!*msg_ready && !list_empty(&vvs->rx_queue)) {
...
if (bytes_to_copy) {
int err;
/* ...
*/
spin_unlock_bh(&vvs->rx_lock);
err = memcpy_to_msgmsg, pkt->buf, bytes_to_copy);
if (err) {
dequeued_len = err;
goto out;
}
spin_lock_bh(&vvs->rx_lock);
user_buf_len -= bytes_to_copy;
}
dequeued_len += pkt_len;
if (le32_to_cpu(pkt->hdr.flags) & VIRTIO_VSOCK_SEQ_EOR)
*msg_ready = true;
virtio_transport_dec_rx_pkt(vvs, pkt);
list_del(&pkt->list);
virtio_transport_free_pkt(pkt);
}
out:
spin_unlock_bh(&vvs->rx_lock);
virtio_transport_send_credit_update(vsk);
return dequeued_len;
}
I think we can't do 'goto out' or break, because in case of error,
we still need
to free packet.
Didn't we have code that remove packets from a previous message?
I don't see it anymore.
For example if we have 10 packets queued for a message (the 10th
packet
has the EOR flag) and the memcpy_to_msg() fails on the 2nd packet, with
you proposal we are freeing only the first 2 packets, the rest is there
and should be freed when reading the next message, but I don't see that
code.
The same can happen if the recvmsg syscall is interrupted. In that case
we report that nothing was copied, but we freed the first N packets, so
they are lost but the other packets are still in the queue.
Please check also the patch where we implemented
__vsock_seqpacket_recvmsg().
I thinks we should free packets only when we are sure we copied them to
the user space.
Hm, yes, this is problem. To solve it i can restore previous approach
with seqbegin/seqend. In that case i can detect unfinished record and
drop it's packets. Seems seqbegin will be a bit like
VIRTIO_VSOCK_SEQ_EOR in flags
field of header(e.g. VIRTIO_VSOCK_SEQ_BEGIN). Message id and length are
unneeded,
as channel considedered lossless. What do You think?
I think VIRTIO_VSOCK_SEQ_BEGIN is redundant, using only EOR should be
fine.
When we receive EOR we know that this is the last packet on this message
and the next packet will be the first of a new message.
What we should do is check that we have all the fragments of a packet
and return them all together, otherwise we have to say we have nothing.
For example as we process packets from the vitqueue and queue them in
the rx_queue we could use a counter of how many EORs are in the
rx_queue, which we decrease in virtio_transport_seqpacket_do_dequeue()
when we copied all the fragments.
If the counter is 0, we don't remove anything from the queue and
virtio_transport_seqpacket_do_dequeue() returns 0.
So .seqpacket_dequeue should return 0 if there is not at least one
complete message, or return the entire message. A partial message should
never return.
What do you think?
I like it, i've implemented this approach in some early pre v1 versions.
But in this case, credit update logic will be changed - in current implementation
(both seqpacket and stream) credit update reply is sent when data is copied
to user's buffer(e.g. we copy data somewhere, free packet and ready to process
new packet). But if we don't touch user's buffer and keeping incoming packet in rx queue
until whole record is ready, when to send credit update?
I think the best approach could be to send credit updates when we remove
them from the rx_queue.
In that case, it will be impossible to send message bigger than size of rx buffer
(e.g. credit allowed size), because packet will be queued without credit update
reply until credit allowed reach 0.
Yep, but I think it is a reasonable limit for a datagram socket.
Maybe we can add a check on the TX side, since we know this value and
return an error to the user.
Thanks,
Stefano
_______________________________________________
Virtualization mailing list
Virtualization@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
