Re: [PATCH v4 0/9] drm: Support simple-framebuffer devices and firmware fbs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Daniel,

On Tue, Apr 20, 2021 at 10:46 AM Daniel Vetter <daniel@xxxxxxxx> wrote:
> On Mon, Apr 19, 2021 at 10:00:56AM +0200, Geert Uytterhoeven wrote:
> > On Fri, Apr 16, 2021 at 11:00 AM Thomas Zimmermann <tzimmermann@xxxxxxx> wrote:
> > > This patchset adds support for simple-framebuffer platform devices and
> > > a handover mechanism for native drivers to take-over control of the
> > > hardware.
> > >
> > > The new driver, called simpledrm, binds to a simple-frambuffer platform
> > > device. The kernel's boot code creates such devices for firmware-provided
> > > framebuffers, such as EFI-GOP or VESA. Typically the BIOS, UEFI or boot
> > > loader sets up the framebuffers. Description via device tree is also an
> > > option.
> >
> > I guess this can be used as a replacement for offb, too...
> >
> > > Patches 4 to 8 add the simpledrm driver. It's build on simple DRM helpers
> > > and SHMEM. It supports 16-bit, 24-bit and 32-bit RGB framebuffers. During
> >
> > .... if support for 8-bit frame buffers would be added?
>
> Is that 8-bit greyscale or 8-bit indexed with 256 entry palette? Former

8-bit indexed with 256 entry palette.

> shouldn't be a big thing, but the latter is only really supported by the
> overall drm ecosystem in theory. Most userspace assumes that xrgb8888
> works, and we keep that illusion up by emulating it in kernel for hw which
> just doesn't support it. But reformatting xrgb8888 to c8 is tricky at
> best. The uapis are all there for setting the palette, and C8 is a defined
> format even with atomic kms interface, but really there's not much
> userspace for it. In other words, it would work as well as current offb
> would, but that's at least that.

Oh, that's good to know!
Does this mean fbdev is not deprecated for anything <= C8? ;-)

A while ago, I was looking into converting an fbdev driver to drm, and
one of the things I ran into is lack of C4, C2, C1, Y8, Y4, Y2, and
monochrome support.  On top of that, lots of internal code seems to
assume pixels are never smaller than a byte (thus ignoring
char_per_block[]/block_w).  The lack of support for planar modes isn't
that bad, combined with the need for copying, as c2p conversion can be
done while copying, thus even making life easier for userspace
applications that can just always work on chunky data.
Then real work kicked in, before I got anything working...

Thanks!

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
_______________________________________________
Virtualization mailing list
Virtualization@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linuxfoundation.org/mailman/listinfo/virtualization



[Index of Archives]     [KVM Development]     [Libvirt Development]     [Libvirt Users]     [CentOS Virtualization]     [Netdev]     [Ethernet Bridging]     [Linux Wireless]     [Kernel Newbies]     [Security]     [Linux for Hams]     [Netfilter]     [Bugtraq]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux Admin]     [Samba]

  Powered by Linux