Add an I2C bus driver for virtio para-virtualization. The controller can be emulated by the backend driver in any device model software by following the virtio protocol. The device specification can be found on https://lists.oasis-open.org/archives/virtio-comment/202101/msg00008.html. By following the specification, people may implement different backend drivers to emulate different controllers according to their needs. Co-developed-by: Conghui Chen <conghui.chen@xxxxxxxxx> Signed-off-by: Conghui Chen <conghui.chen@xxxxxxxxx> Signed-off-by: Jie Deng <jie.deng@xxxxxxxxx> --- drivers/i2c/busses/Kconfig | 11 ++ drivers/i2c/busses/Makefile | 3 + drivers/i2c/busses/i2c-virtio.c | 289 ++++++++++++++++++++++++++++++++++++++++ include/uapi/linux/virtio_i2c.h | 42 ++++++ include/uapi/linux/virtio_ids.h | 1 + 5 files changed, 346 insertions(+) create mode 100644 drivers/i2c/busses/i2c-virtio.c create mode 100644 include/uapi/linux/virtio_i2c.h diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 05ebf75..0860395 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -21,6 +21,17 @@ config I2C_ALI1535 This driver can also be built as a module. If so, the module will be called i2c-ali1535. +config I2C_VIRTIO + tristate "Virtio I2C Adapter" + depends on VIRTIO + help + If you say yes to this option, support will be included for the virtio + I2C adapter driver. The hardware can be emulated by any device model + software according to the virtio protocol. + + This driver can also be built as a module. If so, the module + will be called i2c-virtio. + config I2C_ALI1563 tristate "ALI 1563" depends on PCI diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index 615f35e..b88da08 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -6,6 +6,9 @@ # ACPI drivers obj-$(CONFIG_I2C_SCMI) += i2c-scmi.o +# VIRTIO I2C host controller driver +obj-$(CONFIG_I2C_VIRTIO) += i2c-virtio.o + # PC SMBus host controller drivers obj-$(CONFIG_I2C_ALI1535) += i2c-ali1535.o obj-$(CONFIG_I2C_ALI1563) += i2c-ali1563.o diff --git a/drivers/i2c/busses/i2c-virtio.c b/drivers/i2c/busses/i2c-virtio.c new file mode 100644 index 0000000..98c0fcc --- /dev/null +++ b/drivers/i2c/busses/i2c-virtio.c @@ -0,0 +1,289 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Virtio I2C Bus Driver + * + * The Virtio I2C Specification: + * https://raw.githubusercontent.com/oasis-tcs/virtio-spec/master/virtio-i2c.tex + * + * Copyright (c) 2021 Intel Corporation. All rights reserved. + */ + +#include <linux/acpi.h> +#include <linux/completion.h> +#include <linux/err.h> +#include <linux/i2c.h> +#include <linux/io.h> +#include <linux/jiffies.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/wait.h> + +#include <linux/virtio.h> +#include <linux/virtio_i2c.h> + +/** + * struct virtio_i2c - virtio I2C data + * @vdev: virtio device for this controller + * @completion: completion of virtio I2C message + * @adap: I2C adapter for this controller + * @i2c_lock: lock for virtqueue processing + * @vq: the virtio virtqueue for communication + */ +struct virtio_i2c { + struct virtio_device *vdev; + struct completion completion; + struct i2c_adapter adap; + struct mutex i2c_lock; + struct virtqueue *vq; +}; + +/** + * struct virtio_i2c_req - the virtio I2C request structure + * @out_hdr: the OUT header of the virtio I2C message + * @buf: the buffer into which data is read, or from which it's written + * @in_hdr: the IN header of the virtio I2C message + */ +struct virtio_i2c_req { + struct virtio_i2c_out_hdr out_hdr; + u8 *buf; + struct virtio_i2c_in_hdr in_hdr; +}; + +static void virtio_i2c_msg_done(struct virtqueue *vq) +{ + struct virtio_i2c *vi = vq->vdev->priv; + + complete(&vi->completion); +} + +static int virtio_i2c_send_reqs(struct virtqueue *vq, + struct virtio_i2c_req *reqs, + struct i2c_msg *msgs, int nr) +{ + struct scatterlist *sgs[3], out_hdr, msg_buf, in_hdr; + int i, outcnt, incnt, err = 0; + u8 *buf; + + for (i = 0; i < nr; i++) { + if (!msgs[i].len) + break; + + /* Only 7-bit mode supported for this moment. For the address format, + * Please check the Virtio I2C Specification. + */ + reqs[i].out_hdr.addr = cpu_to_le16(msgs[i].addr << 1); + + if (i != nr - 1) + reqs[i].out_hdr.flags |= VIRTIO_I2C_FLAGS_FAIL_NEXT; + + outcnt = incnt = 0; + sg_init_one(&out_hdr, &reqs[i].out_hdr, sizeof(reqs[i].out_hdr)); + sgs[outcnt++] = &out_hdr; + + buf = kzalloc(msgs[i].len, GFP_KERNEL); + if (!buf) + break; + + reqs[i].buf = buf; + sg_init_one(&msg_buf, reqs[i].buf, msgs[i].len); + + if (msgs[i].flags & I2C_M_RD) { + sgs[outcnt + incnt++] = &msg_buf; + } else { + memcpy(reqs[i].buf, msgs[i].buf, msgs[i].len); + sgs[outcnt++] = &msg_buf; + } + + sg_init_one(&in_hdr, &reqs[i].in_hdr, sizeof(reqs[i].in_hdr)); + sgs[outcnt + incnt++] = &in_hdr; + + err = virtqueue_add_sgs(vq, sgs, outcnt, incnt, &reqs[i], GFP_KERNEL); + if (err < 0) { + pr_err("failed to add msg[%d] to virtqueue.\n", i); + kfree(reqs[i].buf); + reqs[i].buf = NULL; + break; + } + } + + return i; +} + +static int virtio_i2c_complete_reqs(struct virtqueue *vq, + struct virtio_i2c_req *reqs, + struct i2c_msg *msgs, int nr) +{ + struct virtio_i2c_req *req; + unsigned int len; + int i; + + for (i = 0; i < nr; i++) { + req = (struct virtio_i2c_req *)virtqueue_get_buf(vq, &len); + if (!(req && req == &reqs[i])) { + pr_err("msg[%d]: addr=0x%x virtqueue error.\n", i, msgs[i].addr); + break; + } + + if (req->in_hdr.status != VIRTIO_I2C_MSG_OK) { + pr_err("msg[%d]: addr=0x%x backend error.\n", i, msgs[i].addr); + break; + } + + if (msgs[i].flags & I2C_M_RD) + memcpy(msgs[i].buf, req->buf, msgs[i].len); + + kfree(req->buf); + req->buf = NULL; + } + + return i; +} + +static int virtio_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) +{ + struct virtio_i2c *vi = i2c_get_adapdata(adap); + struct virtqueue *vq = vi->vq; + struct virtio_i2c_req *reqs; + unsigned long time_left; + int ret, nr; + + reqs = kcalloc(num, sizeof(*reqs), GFP_KERNEL); + if (!reqs) + return -ENOMEM; + + mutex_lock(&vi->i2c_lock); + + ret = virtio_i2c_send_reqs(vq, reqs, msgs, num); + if (ret == 0) + goto err_unlock_free; + + nr = ret; + + virtqueue_kick(vq); + + time_left = wait_for_completion_timeout(&vi->completion, adap->timeout); + if (!time_left) { + dev_err(&adap->dev, "virtio i2c backend timeout.\n"); + ret = -ETIMEDOUT; + goto err_unlock_free; + } + + ret = virtio_i2c_complete_reqs(vq, reqs, msgs, nr); + + reinit_completion(&vi->completion); + +err_unlock_free: + mutex_unlock(&vi->i2c_lock); + kfree(reqs); + return ret; +} + +static void virtio_i2c_del_vqs(struct virtio_device *vdev) +{ + vdev->config->reset(vdev); + vdev->config->del_vqs(vdev); +} + +static int virtio_i2c_setup_vqs(struct virtio_i2c *vi) +{ + struct virtio_device *vdev = vi->vdev; + + vi->vq = virtio_find_single_vq(vdev, virtio_i2c_msg_done, "msg"); + return PTR_ERR_OR_ZERO(vi->vq); +} + +static u32 virtio_i2c_func(struct i2c_adapter *adap) +{ + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; +} + +static struct i2c_algorithm virtio_algorithm = { + .master_xfer = virtio_i2c_xfer, + .functionality = virtio_i2c_func, +}; + +static struct i2c_adapter virtio_adapter = { + .owner = THIS_MODULE, + .name = "Virtio I2C Adapter", + .class = I2C_CLASS_DEPRECATED, + .algo = &virtio_algorithm, +}; + +static int virtio_i2c_probe(struct virtio_device *vdev) +{ + struct device *pdev = vdev->dev.parent; + struct virtio_i2c *vi; + int ret; + + vi = devm_kzalloc(&vdev->dev, sizeof(*vi), GFP_KERNEL); + if (!vi) + return -ENOMEM; + + vdev->priv = vi; + vi->vdev = vdev; + + mutex_init(&vi->i2c_lock); + init_completion(&vi->completion); + + ret = virtio_i2c_setup_vqs(vi); + if (ret) + return ret; + + vi->adap = virtio_adapter; + i2c_set_adapdata(&vi->adap, vi); + vi->adap.dev.parent = &vdev->dev; + /* Setup ACPI node for controlled devices which will be probed through ACPI */ + ACPI_COMPANION_SET(&vi->adap.dev, ACPI_COMPANION(pdev)); + vi->adap.timeout = HZ / 10; + + ret = i2c_add_adapter(&vi->adap); + if (ret) { + virtio_i2c_del_vqs(vdev); + dev_err(&vdev->dev, "failed to add virtio-i2c adapter.\n"); + } + + return ret; +} + +static void virtio_i2c_remove(struct virtio_device *vdev) +{ + struct virtio_i2c *vi = vdev->priv; + + i2c_del_adapter(&vi->adap); + virtio_i2c_del_vqs(vdev); +} + +static struct virtio_device_id id_table[] = { + { VIRTIO_ID_I2C_ADPTER, VIRTIO_DEV_ANY_ID }, + {} +}; +MODULE_DEVICE_TABLE(virtio, id_table); + +static int __maybe_unused virtio_i2c_freeze(struct virtio_device *vdev) +{ + virtio_i2c_del_vqs(vdev); + return 0; +} + +static int __maybe_unused virtio_i2c_restore(struct virtio_device *vdev) +{ + return virtio_i2c_setup_vqs(vdev->priv); +} + +static struct virtio_driver virtio_i2c_driver = { + .id_table = id_table, + .probe = virtio_i2c_probe, + .remove = virtio_i2c_remove, + .driver = { + .name = "i2c_virtio", + }, +#ifdef CONFIG_PM_SLEEP + .freeze = virtio_i2c_freeze, + .restore = virtio_i2c_restore, +#endif +}; +module_virtio_driver(virtio_i2c_driver); + +MODULE_DESCRIPTION("Virtio i2c bus driver"); +MODULE_LICENSE("GPL"); diff --git a/include/uapi/linux/virtio_i2c.h b/include/uapi/linux/virtio_i2c.h new file mode 100644 index 0000000..00f4508 --- /dev/null +++ b/include/uapi/linux/virtio_i2c.h @@ -0,0 +1,42 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later WITH Linux-syscall-note */ +/* + * Definitions for virtio I2C Adpter + * + * Copyright (c) 2021 Intel Corporation. All rights reserved. + */ + +#ifndef _UAPI_LINUX_VIRTIO_I2C_H +#define _UAPI_LINUX_VIRTIO_I2C_H + +#include <linux/types.h> +#include <linux/virtio_ids.h> +#include <linux/virtio_config.h> + +/** + * struct virtio_i2c_out_hdr - the virtio I2C message OUT header + * @addr: the controlled device address + * @padding: used to pad to full dword + * @flags: used for feature extensibility + */ +struct virtio_i2c_out_hdr { + __le16 addr; + __le16 padding; + __le32 flags; +}; + +/* The bit 0 of the @virtio_i2c_out_hdr.@flags, used to group the requests */ +#define VIRTIO_I2C_FLAGS_FAIL_NEXT 0x00000001 + +/** + * struct virtio_i2c_in_hdr - the virtio I2C message IN header + * @status: the processing result from the backend + */ +struct virtio_i2c_in_hdr { + u8 status; +}; + +/* The final status written by the device */ +#define VIRTIO_I2C_MSG_OK 0 +#define VIRTIO_I2C_MSG_ERR 1 + +#endif /* _UAPI_LINUX_VIRTIO_I2C_H */ diff --git a/include/uapi/linux/virtio_ids.h b/include/uapi/linux/virtio_ids.h index bc1c062..6ae32db 100644 --- a/include/uapi/linux/virtio_ids.h +++ b/include/uapi/linux/virtio_ids.h @@ -54,5 +54,6 @@ #define VIRTIO_ID_FS 26 /* virtio filesystem */ #define VIRTIO_ID_PMEM 27 /* virtio pmem */ #define VIRTIO_ID_MAC80211_HWSIM 29 /* virtio mac80211-hwsim */ +#define VIRTIO_ID_I2C_ADPTER 34 /* virtio i2c adpter */ #endif /* _LINUX_VIRTIO_IDS_H */ -- 2.7.4 _______________________________________________ Virtualization mailing list Virtualization@xxxxxxxxxxxxxxxxxxxxxxxxxx https://lists.linuxfoundation.org/mailman/listinfo/virtualization
