Re: [PATCH net] virtio-net: suppress bad irq warning for tx napi

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Feb 02, 2021 at 07:06:53PM -0500, Willem de Bruijn wrote:
> On Tue, Feb 2, 2021 at 6:53 PM Willem de Bruijn <willemb@xxxxxxxxxx> wrote:
> >
> > On Tue, Feb 2, 2021 at 6:47 PM Wei Wang <weiwan@xxxxxxxxxx> wrote:
> > >
> > > On Tue, Feb 2, 2021 at 3:12 PM Michael S. Tsirkin <mst@xxxxxxxxxx> wrote:
> > > >
> > > > On Thu, Jan 28, 2021 at 04:21:36PM -0800, Wei Wang wrote:
> > > > > With the implementation of napi-tx in virtio driver, we clean tx
> > > > > descriptors from rx napi handler, for the purpose of reducing tx
> > > > > complete interrupts. But this could introduce a race where tx complete
> > > > > interrupt has been raised, but the handler found there is no work to do
> > > > > because we have done the work in the previous rx interrupt handler.
> > > > > This could lead to the following warning msg:
> > > > > [ 3588.010778] irq 38: nobody cared (try booting with the
> > > > > "irqpoll" option)
> > > > > [ 3588.017938] CPU: 4 PID: 0 Comm: swapper/4 Not tainted
> > > > > 5.3.0-19-generic #20~18.04.2-Ubuntu
> > > > > [ 3588.017940] Call Trace:
> > > > > [ 3588.017942]  <IRQ>
> > > > > [ 3588.017951]  dump_stack+0x63/0x85
> > > > > [ 3588.017953]  __report_bad_irq+0x35/0xc0
> > > > > [ 3588.017955]  note_interrupt+0x24b/0x2a0
> > > > > [ 3588.017956]  handle_irq_event_percpu+0x54/0x80
> > > > > [ 3588.017957]  handle_irq_event+0x3b/0x60
> > > > > [ 3588.017958]  handle_edge_irq+0x83/0x1a0
> > > > > [ 3588.017961]  handle_irq+0x20/0x30
> > > > > [ 3588.017964]  do_IRQ+0x50/0xe0
> > > > > [ 3588.017966]  common_interrupt+0xf/0xf
> > > > > [ 3588.017966]  </IRQ>
> > > > > [ 3588.017989] handlers:
> > > > > [ 3588.020374] [<000000001b9f1da8>] vring_interrupt
> > > > > [ 3588.025099] Disabling IRQ #38
> > > > >
> > > > > This patch adds a new param to struct vring_virtqueue, and we set it for
> > > > > tx virtqueues if napi-tx is enabled, to suppress the warning in such
> > > > > case.
> > > > >
> > > > > Fixes: 7b0411ef4aa6 ("virtio-net: clean tx descriptors from rx napi")
> > > > > Reported-by: Rick Jones <jonesrick@xxxxxxxxxx>
> > > > > Signed-off-by: Wei Wang <weiwan@xxxxxxxxxx>
> > > > > Signed-off-by: Willem de Bruijn <willemb@xxxxxxxxxx>
> > > >
> > > >
> > > > This description does not make sense to me.
> > > >
> > > > irq X: nobody cared
> > > > only triggers after an interrupt is unhandled repeatedly.
> > > >
> > > > So something causes a storm of useless tx interrupts here.
> > > >
> > > > Let's find out what it was please. What you are doing is
> > > > just preventing linux from complaining.
> > >
> > > The traffic that causes this warning is a netperf tcp_stream with at
> > > least 128 flows between 2 hosts. And the warning gets triggered on the
> > > receiving host, which has a lot of rx interrupts firing on all queues,
> > > and a few tx interrupts.
> > > And I think the scenario is: when the tx interrupt gets fired, it gets
> > > coalesced with the rx interrupt. Basically, the rx and tx interrupts
> > > get triggered very close to each other, and gets handled in one round
> > > of do_IRQ(). And the rx irq handler gets called first, which calls
> > > virtnet_poll(). However, virtnet_poll() calls virtnet_poll_cleantx()
> > > to try to do the work on the corresponding tx queue as well. That's
> > > why when tx interrupt handler gets called, it sees no work to do.
> > > And the reason for the rx handler to handle the tx work is here:
> > > https://lists.linuxfoundation.org/pipermail/virtualization/2017-April/034740.html
> >
> > Indeed. It's not a storm necessarily. The warning occurs after one
> > hundred such events, since boot, which is a small number compared real
> > interrupt load.
> 
> Sorry, this is wrong. It is the other call to __report_bad_irq from
> note_interrupt that applies here.
> 
> > Occasionally seeing an interrupt with no work is expected after
> > 7b0411ef4aa6 ("virtio-net: clean tx descriptors from rx napi"). As
> > long as this rate of events is very low compared to useful interrupts,
> > and total interrupt count is greatly reduced vs not having work
> > stealing, it is a net win.

Right, but if 99900 out of 100000 interrupts were wasted, then it is
surely an even greater win to disable interrupts while polling like
this.  Might be tricky to detect, disabling/enabling aggressively every
time even if there's nothing in the queue is sure to cause lots of cache
line bounces, and we don't want to enable callbacks if they were not
enabled e.g. by start_xmit ...  Some kind of counter?


-- 
MST

_______________________________________________
Virtualization mailing list
Virtualization@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linuxfoundation.org/mailman/listinfo/virtualization



[Index of Archives]     [KVM Development]     [Libvirt Development]     [Libvirt Users]     [CentOS Virtualization]     [Netdev]     [Ethernet Bridging]     [Linux Wireless]     [Kernel Newbies]     [Security]     [Linux for Hams]     [Netfilter]     [Bugtraq]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux Admin]     [Samba]

  Powered by Linux