Re: [PATCH v4 4/4] vhost: add an RPMsg API

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Aug 04, 2020 at 10:27:08AM -0400, Michael S. Tsirkin wrote:
> On Wed, Jul 22, 2020 at 05:09:27PM +0200, Guennadi Liakhovetski wrote:
> > Linux supports running the RPMsg protocol over the VirtIO transport
> > protocol, but currently there is only support for VirtIO clients and
> > no support for a VirtIO server. This patch adds a vhost-based RPMsg
> > server implementation.
> > 
> > Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@xxxxxxxxxxxxxxx>
> > ---
> >  drivers/vhost/Kconfig       |   7 +
> >  drivers/vhost/Makefile      |   3 +
> >  drivers/vhost/rpmsg.c       | 375 ++++++++++++++++++++++++++++++++++++
> >  drivers/vhost/vhost_rpmsg.h |  74 +++++++
> >  4 files changed, 459 insertions(+)
> >  create mode 100644 drivers/vhost/rpmsg.c
> >  create mode 100644 drivers/vhost/vhost_rpmsg.h
> > 
> > diff --git a/drivers/vhost/Kconfig b/drivers/vhost/Kconfig
> > index d3688c6afb87..602421bf1d03 100644
> > --- a/drivers/vhost/Kconfig
> > +++ b/drivers/vhost/Kconfig
> > @@ -38,6 +38,13 @@ config VHOST_NET
> >  	  To compile this driver as a module, choose M here: the module will
> >  	  be called vhost_net.
> >  
> > +config VHOST_RPMSG
> > +	tristate
> 
> So this lacks a description line so it does not appear
> in menuconfig. How is user supposed to set it?
> I added a one-line description.

That was on purpose. I don't think there's any value in this API stand-alone, 
so I let users select it as needed. But we can change that too, id desired.

> > +	depends on VHOST
> 
> Other drivers select VHOST instead. Any reason not to
> do it like this here?

I have

+	select VHOST
+	select VHOST_RPMSG

in my client driver patch.

> > +	help
> > +	  Vhost RPMsg API allows vhost drivers to communicate with VirtIO
> > +	  drivers, using the RPMsg over VirtIO protocol.
> > +
> 
> >  config VHOST_SCSI
> >  	tristate "VHOST_SCSI TCM fabric driver"
> >  	depends on TARGET_CORE && EVENTFD
> > diff --git a/drivers/vhost/Makefile b/drivers/vhost/Makefile
> > index f3e1897cce85..9cf459d59f97 100644
> > --- a/drivers/vhost/Makefile
> > +++ b/drivers/vhost/Makefile
> > @@ -2,6 +2,9 @@
> >  obj-$(CONFIG_VHOST_NET) += vhost_net.o
> >  vhost_net-y := net.o
> >  
> > +obj-$(CONFIG_VHOST_RPMSG) += vhost_rpmsg.o
> > +vhost_rpmsg-y := rpmsg.o
> > +
> >  obj-$(CONFIG_VHOST_SCSI) += vhost_scsi.o
> >  vhost_scsi-y := scsi.o
> >  
> > diff --git a/drivers/vhost/rpmsg.c b/drivers/vhost/rpmsg.c
> > new file mode 100644
> > index 000000000000..d7ab48414224
> > --- /dev/null
> > +++ b/drivers/vhost/rpmsg.c
> > @@ -0,0 +1,375 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +/*
> > + * Copyright(c) 2020 Intel Corporation. All rights reserved.
> > + *
> > + * Author: Guennadi Liakhovetski <guennadi.liakhovetski@xxxxxxxxxxxxxxx>
> > + *
> > + * Vhost RPMsg VirtIO interface. It provides a set of functions to match the
> > + * guest side RPMsg VirtIO API, provided by drivers/rpmsg/virtio_rpmsg_bus.c
> > + * These functions handle creation of 2 virtual queues, handling of endpoint
> > + * addresses, sending a name-space announcement to the guest as well as any
> > + * user messages. This API can be used by any vhost driver to handle RPMsg
> > + * specific processing.
> > + * Specific vhost drivers, using this API will use their own VirtIO device
> > + * IDs, that should then also be added to the ID table in virtio_rpmsg_bus.c
> > + */
> > +
> > +#include <linux/compat.h>
> > +#include <linux/file.h>
> > +#include <linux/miscdevice.h>
> > +#include <linux/module.h>
> > +#include <linux/mutex.h>
> > +#include <linux/vhost.h>
> > +#include <linux/virtio_rpmsg.h>
> > +#include <uapi/linux/rpmsg.h>
> > +
> > +#include "vhost.h"
> > +#include "vhost_rpmsg.h"
> > +
> > +/*
> > + * All virtio-rpmsg virtual queue kicks always come with just one buffer -
> > + * either input or output
> > + */
> > +static int vhost_rpmsg_get_single(struct vhost_virtqueue *vq)
> > +{
> > +	struct vhost_rpmsg *vr = container_of(vq->dev, struct vhost_rpmsg, dev);
> > +	unsigned int out, in;
> > +	int head = vhost_get_vq_desc(vq, vq->iov, ARRAY_SIZE(vq->iov), &out, &in,
> > +				     NULL, NULL);
> > +	if (head < 0) {
> > +		vq_err(vq, "%s(): error %d getting buffer\n",
> > +		       __func__, head);
> > +		return head;
> > +	}
> > +
> > +	/* Nothing new? */
> > +	if (head == vq->num)
> > +		return head;
> > +
> > +	if (vq == &vr->vq[VIRTIO_RPMSG_RESPONSE] && (out || in != 1)) {
> 
> This in != 1 looks like a dependency on a specific message layout.
> virtio spec says to avoid these. Using iov iters it's not too hard to do
> ...

This is an RPMsg VirtIO implementation, and it has to match the virtio_rpmsg_bus.c 
driver, and that one has specific VirtIO queue and message usage patterns.

> > +		vq_err(vq,
> > +		       "%s(): invalid %d input and %d output in response queue\n",
> > +		       __func__, in, out);
> > +		goto return_buf;
> > +	}
> > +
> > +	if (vq == &vr->vq[VIRTIO_RPMSG_REQUEST] && (in || out != 1)) {
> > +		vq_err(vq,
> > +		       "%s(): invalid %d input and %d output in request queue\n",
> > +		       __func__, in, out);
> > +		goto return_buf;
> > +	}
> > +
> > +	return head;
> > +
> > +return_buf:
> > +	/*
> > +	 * FIXME: might need to return the buffer using vhost_add_used()
> > +	 * or vhost_discard_vq_desc(). vhost_discard_vq_desc() is
> > +	 * described as "being useful for error handling," but it makes
> > +	 * the thus discarded buffers "unseen," so next time we look we
> > +	 * retrieve them again?
> 
> 
> Yes. It's your decision what to do on error. if you also signal
> an eventfd using vq_err, then discarding will
> make it so userspace can poke at ring and hopefully fix it ...

I assume the user-space in this case is QEMU. Would it be the safest to use 
vhost_add_used() then?

> > +	 */
> > +	return -EINVAL;
> > +}

[snip]

> > +	return 0;
> > +
> > +return_buf:
> > +	/*
> > +	 * FIXME: vhost_discard_vq_desc() or vhost_add_used(), see comment in
> > +	 * vhost_rpmsg_get_single()
> > +	 */
> 
> What's to be done with this FIXME?

This is the same question as above - I just wasn't sure which error handling 
was appropriate here, don't think many vhost drivers do any od this...

Thanks
Guennadi
_______________________________________________
Virtualization mailing list
Virtualization@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linuxfoundation.org/mailman/listinfo/virtualization



[Index of Archives]     [KVM Development]     [Libvirt Development]     [Libvirt Users]     [CentOS Virtualization]     [Netdev]     [Ethernet Bridging]     [Linux Wireless]     [Kernel Newbies]     [Security]     [Linux for Hams]     [Netfilter]     [Bugtraq]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux Admin]     [Samba]

  Powered by Linux