Re: [PATCH 3/4] vsock/virtio: fix flush of works during the .remove()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, May 29, 2019 at 11:22:40AM +0800, Jason Wang wrote:
> 
> On 2019/5/28 下午6:56, Stefano Garzarella wrote:
> > We flush all pending works before to call vdev->config->reset(vdev),
> > but other works can be queued before the vdev->config->del_vqs(vdev),
> > so we add another flush after it, to avoid use after free.
> > 
> > Suggested-by: Michael S. Tsirkin <mst@xxxxxxxxxx>
> > Signed-off-by: Stefano Garzarella <sgarzare@xxxxxxxxxx>
> > ---
> >   net/vmw_vsock/virtio_transport.c | 23 +++++++++++++++++------
> >   1 file changed, 17 insertions(+), 6 deletions(-)
> > 
> > diff --git a/net/vmw_vsock/virtio_transport.c b/net/vmw_vsock/virtio_transport.c
> > index e694df10ab61..ad093ce96693 100644
> > --- a/net/vmw_vsock/virtio_transport.c
> > +++ b/net/vmw_vsock/virtio_transport.c
> > @@ -660,6 +660,15 @@ static int virtio_vsock_probe(struct virtio_device *vdev)
> >   	return ret;
> >   }
> > +static void virtio_vsock_flush_works(struct virtio_vsock *vsock)
> > +{
> > +	flush_work(&vsock->loopback_work);
> > +	flush_work(&vsock->rx_work);
> > +	flush_work(&vsock->tx_work);
> > +	flush_work(&vsock->event_work);
> > +	flush_work(&vsock->send_pkt_work);
> > +}
> > +
> >   static void virtio_vsock_remove(struct virtio_device *vdev)
> >   {
> >   	struct virtio_vsock *vsock = vdev->priv;
> > @@ -668,12 +677,6 @@ static void virtio_vsock_remove(struct virtio_device *vdev)
> >   	mutex_lock(&the_virtio_vsock_mutex);
> >   	the_virtio_vsock = NULL;
> > -	flush_work(&vsock->loopback_work);
> > -	flush_work(&vsock->rx_work);
> > -	flush_work(&vsock->tx_work);
> > -	flush_work(&vsock->event_work);
> > -	flush_work(&vsock->send_pkt_work);
> > -
> >   	/* Reset all connected sockets when the device disappear */
> >   	vsock_for_each_connected_socket(virtio_vsock_reset_sock);
> > @@ -690,6 +693,9 @@ static void virtio_vsock_remove(struct virtio_device *vdev)
> >   	vsock->event_run = false;
> >   	mutex_unlock(&vsock->event_lock);
> > +	/* Flush all pending works */
> > +	virtio_vsock_flush_works(vsock);
> > +
> >   	/* Flush all device writes and interrupts, device will not use any
> >   	 * more buffers.
> >   	 */
> > @@ -726,6 +732,11 @@ static void virtio_vsock_remove(struct virtio_device *vdev)
> >   	/* Delete virtqueues and flush outstanding callbacks if any */
> >   	vdev->config->del_vqs(vdev);
> > +	/* Other works can be queued before 'config->del_vqs()', so we flush
> > +	 * all works before to free the vsock object to avoid use after free.
> > +	 */
> > +	virtio_vsock_flush_works(vsock);
> 
> 
> Some questions after a quick glance:
> 
> 1) It looks to me that the work could be queued from the path of
> vsock_transport_cancel_pkt() . Is that synchronized here?
>

Both virtio_transport_send_pkt() and vsock_transport_cancel_pkt() can
queue work from the upper layer (socket).

Setting the_virtio_vsock to NULL, should synchronize, but after a careful look
a rare issue could happen:
we are setting the_virtio_vsock to NULL at the start of .remove() and we
are freeing the object pointed by it at the end of .remove(), so
virtio_transport_send_pkt() or vsock_transport_cancel_pkt() may still be
running, accessing the object that we are freed.

Should I use something like RCU to prevent this issue?

    virtio_transport_send_pkt() and vsock_transport_cancel_pkt()
    {
        rcu_read_lock();
        vsock = rcu_dereference(the_virtio_vsock_mutex);
        ...
        rcu_read_unlock();
    }

    virtio_vsock_remove()
    {
        rcu_assign_pointer(the_virtio_vsock_mutex, NULL);
        synchronize_rcu();

        ...

        free(vsock);
    }

Could there be a better approach?


> 2) If we decide to flush after dev_vqs(), is tx_run/rx_run/event_run still
> needed? It looks to me we've already done except that we need flush rx_work
> in the end since send_pkt_work can requeue rx_work.

The main reason of tx_run/rx_run/event_run is to prevent that a worker
function is running while we are calling config->reset().

E.g. if an interrupt comes between virtio_vsock_flush_works() and
config->reset(), it can queue new works that can access the device while
we are in config->reset().

IMHO they are still needed.

What do you think?


Thanks for your questions,
Stefano
_______________________________________________
Virtualization mailing list
Virtualization@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linuxfoundation.org/mailman/listinfo/virtualization




[Index of Archives]     [KVM Development]     [Libvirt Development]     [Libvirt Users]     [CentOS Virtualization]     [Netdev]     [Ethernet Bridging]     [Linux Wireless]     [Kernel Newbies]     [Security]     [Linux for Hams]     [Netfilter]     [Bugtraq]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux Admin]     [Samba]

  Powered by Linux