Hi Jean,
On 11/15/18 5:52 PM, Jean-Philippe Brucker wrote:
> When the device offers the probe feature, send a probe request for each
> device managed by the IOMMU. Extract RESV_MEM information. When we
> encounter a MSI doorbell region, set it up as a IOMMU_RESV_MSI region.
> This will tell other subsystems that there is no need to map the MSI
> doorbell in the virtio-iommu, because MSIs bypass it.
>
> Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@xxxxxxx>
Reviewed-by: Eric Auger <eric.auger@xxxxxxxxxx>
Thanks
Eric
> ---
> drivers/iommu/virtio-iommu.c | 156 ++++++++++++++++++++++++++++--
> include/uapi/linux/virtio_iommu.h | 38 ++++++++
> 2 files changed, 188 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/iommu/virtio-iommu.c b/drivers/iommu/virtio-iommu.c
> index 2a9cb6285a1e..c547ebd79c43 100644
> --- a/drivers/iommu/virtio-iommu.c
> +++ b/drivers/iommu/virtio-iommu.c
> @@ -46,6 +46,7 @@ struct viommu_dev {
> struct iommu_domain_geometry geometry;
> u64 pgsize_bitmap;
> u8 domain_bits;
> + u32 probe_size;
> };
>
> struct viommu_mapping {
> @@ -67,8 +68,10 @@ struct viommu_domain {
> };
>
> struct viommu_endpoint {
> + struct device *dev;
> struct viommu_dev *viommu;
> struct viommu_domain *vdomain;
> + struct list_head resv_regions;
> };
>
> struct viommu_request {
> @@ -119,6 +122,9 @@ static off_t viommu_get_req_offset(struct viommu_dev *viommu,
> {
> size_t tail_size = sizeof(struct virtio_iommu_req_tail);
>
> + if (req->type == VIRTIO_IOMMU_T_PROBE)
> + return len - viommu->probe_size - tail_size;
> +
> return len - tail_size;
> }
>
> @@ -394,6 +400,110 @@ static int viommu_replay_mappings(struct viommu_domain *vdomain)
> return ret;
> }
>
> +static int viommu_add_resv_mem(struct viommu_endpoint *vdev,
> + struct virtio_iommu_probe_resv_mem *mem,
> + size_t len)
> +{
> + size_t size;
> + u64 start64, end64;
> + phys_addr_t start, end;
> + struct iommu_resv_region *region = NULL;
> + unsigned long prot = IOMMU_WRITE | IOMMU_NOEXEC | IOMMU_MMIO;
> +
> + start = start64 = le64_to_cpu(mem->start);
> + end = end64 = le64_to_cpu(mem->end);
> + size = end64 - start64 + 1;
> +
> + /* Catch any overflow, including the unlikely end64 - start64 + 1 = 0 */
> + if (start != start64 || end != end64 || size < end64 - start64)
> + return -EOVERFLOW;
> +
> + if (len < sizeof(*mem))
> + return -EINVAL;
> +
> + switch (mem->subtype) {
> + default:
> + dev_warn(vdev->dev, "unknown resv mem subtype 0x%x\n",
> + mem->subtype);
> + /* Fall-through */
> + case VIRTIO_IOMMU_RESV_MEM_T_RESERVED:
> + region = iommu_alloc_resv_region(start, size, 0,
> + IOMMU_RESV_RESERVED);
> + break;
> + case VIRTIO_IOMMU_RESV_MEM_T_MSI:
> + region = iommu_alloc_resv_region(start, size, prot,
> + IOMMU_RESV_MSI);
> + break;
> + }
> + if (!region)
> + return -ENOMEM;
> +
> + list_add(&vdev->resv_regions, ®ion->list);
> + return 0;
> +}
> +
> +static int viommu_probe_endpoint(struct viommu_dev *viommu, struct device *dev)
> +{
> + int ret;
> + u16 type, len;
> + size_t cur = 0;
> + size_t probe_len;
> + struct virtio_iommu_req_probe *probe;
> + struct virtio_iommu_probe_property *prop;
> + struct iommu_fwspec *fwspec = dev->iommu_fwspec;
> + struct viommu_endpoint *vdev = fwspec->iommu_priv;
> +
> + if (!fwspec->num_ids)
> + return -EINVAL;
> +
> + probe_len = sizeof(*probe) + viommu->probe_size +
> + sizeof(struct virtio_iommu_req_tail);
> + probe = kzalloc(probe_len, GFP_KERNEL);
> + if (!probe)
> + return -ENOMEM;
> +
> + probe->head.type = VIRTIO_IOMMU_T_PROBE;
> + /*
> + * For now, assume that properties of an endpoint that outputs multiple
> + * IDs are consistent. Only probe the first one.
> + */
> + probe->endpoint = cpu_to_le32(fwspec->ids[0]);
> +
> + ret = viommu_send_req_sync(viommu, probe, probe_len);
> + if (ret)
> + goto out_free;
> +
> + prop = (void *)probe->properties;
> + type = le16_to_cpu(prop->type) & VIRTIO_IOMMU_PROBE_T_MASK;
> +
> + while (type != VIRTIO_IOMMU_PROBE_T_NONE &&
> + cur < viommu->probe_size) {
> + len = le16_to_cpu(prop->length) + sizeof(*prop);
> +
> + switch (type) {
> + case VIRTIO_IOMMU_PROBE_T_RESV_MEM:
> + ret = viommu_add_resv_mem(vdev, (void *)prop, len);
> + break;
> + default:
> + dev_err(dev, "unknown viommu prop 0x%x\n", type);
> + }
> +
> + if (ret)
> + dev_err(dev, "failed to parse viommu prop 0x%x\n", type);
> +
> + cur += len;
> + if (cur >= viommu->probe_size)
> + break;
> +
> + prop = (void *)probe->properties + cur;
> + type = le16_to_cpu(prop->type) & VIRTIO_IOMMU_PROBE_T_MASK;
> + }
> +
> +out_free:
> + kfree(probe);
> + return ret;
> +}
> +
> /* IOMMU API */
>
> static struct iommu_domain *viommu_domain_alloc(unsigned type)
> @@ -616,15 +726,33 @@ static void viommu_iotlb_sync(struct iommu_domain *domain)
>
> static void viommu_get_resv_regions(struct device *dev, struct list_head *head)
> {
> - struct iommu_resv_region *region;
> + struct iommu_resv_region *entry, *new_entry, *msi = NULL;
> + struct viommu_endpoint *vdev = dev->iommu_fwspec->iommu_priv;
> int prot = IOMMU_WRITE | IOMMU_NOEXEC | IOMMU_MMIO;
>
> - region = iommu_alloc_resv_region(MSI_IOVA_BASE, MSI_IOVA_LENGTH, prot,
> - IOMMU_RESV_SW_MSI);
> - if (!region)
> - return;
> + list_for_each_entry(entry, &vdev->resv_regions, list) {
> + if (entry->type == IOMMU_RESV_MSI)
> + msi = entry;
> +
> + new_entry = kmemdup(entry, sizeof(*entry), GFP_KERNEL);
> + if (!new_entry)
> + return;
> + list_add_tail(&new_entry->list, head);
> + }
> +
> + /*
> + * If the device didn't register any bypass MSI window, add a
> + * software-mapped region.
> + */
> + if (!msi) {
> + msi = iommu_alloc_resv_region(MSI_IOVA_BASE, MSI_IOVA_LENGTH,
> + prot, IOMMU_RESV_SW_MSI);
> + if (!msi)
> + return;
> +
> + list_add_tail(&msi->list, head);
> + }
>
> - list_add_tail(®ion->list, head);
> iommu_dma_get_resv_regions(dev, head);
> }
>
> @@ -672,9 +800,18 @@ static int viommu_add_device(struct device *dev)
> if (!vdev)
> return -ENOMEM;
>
> + vdev->dev = dev;
> vdev->viommu = viommu;
> + INIT_LIST_HEAD(&vdev->resv_regions);
> fwspec->iommu_priv = vdev;
>
> + if (viommu->probe_size) {
> + /* Get additional information for this endpoint */
> + ret = viommu_probe_endpoint(viommu, dev);
> + if (ret)
> + goto err_free_dev;
> + }
> +
> ret = iommu_device_link(&viommu->iommu, dev);
> if (ret)
> goto err_free_dev;
> @@ -696,6 +833,7 @@ static int viommu_add_device(struct device *dev)
> err_unlink_dev:
> iommu_device_unlink(&viommu->iommu, dev);
> err_free_dev:
> + viommu_put_resv_regions(dev, &vdev->resv_regions);
> kfree(vdev);
>
> return ret;
> @@ -713,6 +851,7 @@ static void viommu_remove_device(struct device *dev)
>
> iommu_group_remove_device(dev);
> iommu_device_unlink(&vdev->viommu->iommu, dev);
> + viommu_put_resv_regions(dev, &vdev->resv_regions);
> kfree(vdev);
> }
>
> @@ -812,6 +951,10 @@ static int viommu_probe(struct virtio_device *vdev)
> struct virtio_iommu_config, domain_bits,
> &viommu->domain_bits);
>
> + virtio_cread_feature(vdev, VIRTIO_IOMMU_F_PROBE,
> + struct virtio_iommu_config, probe_size,
> + &viommu->probe_size);
> +
> viommu->geometry = (struct iommu_domain_geometry) {
> .aperture_start = input_start,
> .aperture_end = input_end,
> @@ -893,6 +1036,7 @@ static unsigned int features[] = {
> VIRTIO_IOMMU_F_MAP_UNMAP,
> VIRTIO_IOMMU_F_DOMAIN_BITS,
> VIRTIO_IOMMU_F_INPUT_RANGE,
> + VIRTIO_IOMMU_F_PROBE,
> };
>
> static struct virtio_device_id id_table[] = {
> diff --git a/include/uapi/linux/virtio_iommu.h b/include/uapi/linux/virtio_iommu.h
> index 2e0bf5792f26..cde2a3409caa 100644
> --- a/include/uapi/linux/virtio_iommu.h
> +++ b/include/uapi/linux/virtio_iommu.h
> @@ -14,6 +14,7 @@
> #define VIRTIO_IOMMU_F_DOMAIN_BITS 1
> #define VIRTIO_IOMMU_F_MAP_UNMAP 2
> #define VIRTIO_IOMMU_F_BYPASS 3
> +#define VIRTIO_IOMMU_F_PROBE 4
>
> struct virtio_iommu_range {
> __u64 start;
> @@ -28,6 +29,8 @@ struct virtio_iommu_config {
> /* Max domain ID size */
> __u8 domain_bits;
> __u8 padding[3];
> + /* Probe buffer size */
> + __u32 probe_size;
> };
>
> /* Request types */
> @@ -35,6 +38,7 @@ struct virtio_iommu_config {
> #define VIRTIO_IOMMU_T_DETACH 0x02
> #define VIRTIO_IOMMU_T_MAP 0x03
> #define VIRTIO_IOMMU_T_UNMAP 0x04
> +#define VIRTIO_IOMMU_T_PROBE 0x05
>
> /* Status types */
> #define VIRTIO_IOMMU_S_OK 0x00
> @@ -101,4 +105,38 @@ struct virtio_iommu_req_unmap {
> struct virtio_iommu_req_tail tail;
> };
>
> +#define VIRTIO_IOMMU_PROBE_T_NONE 0
> +#define VIRTIO_IOMMU_PROBE_T_RESV_MEM 1
> +
> +#define VIRTIO_IOMMU_PROBE_T_MASK 0xfff
> +
> +struct virtio_iommu_probe_property {
> + __le16 type;
> + __le16 length;
> +};
> +
> +#define VIRTIO_IOMMU_RESV_MEM_T_RESERVED 0
> +#define VIRTIO_IOMMU_RESV_MEM_T_MSI 1
> +
> +struct virtio_iommu_probe_resv_mem {
> + struct virtio_iommu_probe_property head;
> + __u8 subtype;
> + __u8 reserved[3];
> + __le64 start;
> + __le64 end;
> +};
> +
> +struct virtio_iommu_req_probe {
> + struct virtio_iommu_req_head head;
> + __le32 endpoint;
> + __u8 reserved[64];
> +
> + __u8 properties[];
> +
> + /*
> + * Tail follows the variable-length properties array. No padding,
> + * property lengths are all aligned on 8 bytes.
> + */
> +};
> +
> #endif
>
_______________________________________________
Virtualization mailing list
Virtualization@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
