Re: [PATCH] vhost-net: set packet weight of tx polling to 2 * vq size

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: haibinzhang(张海斌) <haibinzhang@xxxxxxxxxxx>
Date: Fri, 6 Apr 2018 08:22:37 +0000

> handle_tx will delay rx for tens or even hundreds of milliseconds when tx busy
> polling udp packets with small length(e.g. 1byte udp payload), because setting
> VHOST_NET_WEIGHT takes into account only sent-bytes but no single packet length.
> 
> Ping-Latencies shown below were tested between two Virtual Machines using
> netperf (UDP_STREAM, len=1), and then another machine pinged the client:
...
> Signed-off-by: Haibin Zhang <haibinzhang@xxxxxxxxxxx>
> Signed-off-by: Yunfang Tai <yunfangtai@xxxxxxxxxxx>
> Signed-off-by: Lidong Chen <lidongchen@xxxxxxxxxxx>

Michael and Jason, please review.
_______________________________________________
Virtualization mailing list
Virtualization@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linuxfoundation.org/mailman/listinfo/virtualization




[Index of Archives]     [KVM Development]     [Libvirt Development]     [Libvirt Users]     [CentOS Virtualization]     [Netdev]     [Ethernet Bridging]     [Linux Wireless]     [Kernel Newbies]     [Security]     [Linux for Hams]     [Netfilter]     [Bugtraq]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux Admin]     [Samba]

  Powered by Linux