You should Cc Nitesh who is working on a related feature.
On Mon, Nov 13, 2017 at 06:34:48PM +0800, Wei Wang wrote:
> Ping for comments, thanks.
>
> On 11/03/2017 04:13 PM, Wei Wang wrote:
> > Negotiation of the VIRTIO_BALLOON_F_FREE_PAGE_VQ feature indicates the
> > support of reporting hints of guest free pages to the host via
> > virtio-balloon. The host requests the guest to report the free pages by
> > sending commands via the virtio-balloon configuration registers.
> >
> > When the guest starts to report, the first element added to the free page
> > vq is a sequence id of the start reporting command. The id is given by
> > the host, and it indicates whether the following free pages correspond
> > to the command. For example, the host may stop the report and start again
> > with a new command id. The obsolete pages for the previous start command
> > can be detected by the id dismatching on the host. The id is added to the
> > vq using an output buffer, and the free pages are added to the vq using
> > input buffer.
> >
> > Here are some explainations about the added configuration registers:
> > - host2guest_cmd: a register used by the host to send commands to the
> > guest.
> > - guest2host_cmd: written by the guest to ACK to the host about the
> > commands that have been received. The host will clear the corresponding
> > bits on the host2guest_cmd register. The guest also uses this register
> > to send commands to the host (e.g. when finish free page reporting).
I am not sure what is the role of guest2host_cmd. Reporting of
the correct cmd id seems sufficient indication that guest
received the start command. Not getting any more seems sufficient
to detect stop.
> > - free_page_cmd_id: the sequence id of the free page report command
> > given by the host.
> >
> > Signed-off-by: Wei Wang <wei.w.wang@xxxxxxxxx>
> > Signed-off-by: Liang Li <liang.z.li@xxxxxxxxx>
> > Cc: Michael S. Tsirkin <mst@xxxxxxxxxx>
> > Cc: Michal Hocko <mhocko@xxxxxxxxxx>
> > ---
> > drivers/virtio/virtio_balloon.c | 234 ++++++++++++++++++++++++++++++++----
> > include/uapi/linux/virtio_balloon.h | 11 ++
> > 2 files changed, 223 insertions(+), 22 deletions(-)
> >
> > diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c
> > index b31fc25..4087f04 100644
> > --- a/drivers/virtio/virtio_balloon.c
> > +++ b/drivers/virtio/virtio_balloon.c
> > @@ -55,7 +55,12 @@ static struct vfsmount *balloon_mnt;
> > struct virtio_balloon {
> > struct virtio_device *vdev;
> > - struct virtqueue *inflate_vq, *deflate_vq, *stats_vq;
> > + struct virtqueue *inflate_vq, *deflate_vq, *stats_vq, *free_page_vq;
> > +
> > + /* Balloon's own wq for cpu-intensive work items */
> > + struct workqueue_struct *balloon_wq;
> > + /* The free page reporting work item submitted to the balloon wq */
> > + struct work_struct report_free_page_work;
> > /* The balloon servicing is delegated to a freezable workqueue. */
> > struct work_struct update_balloon_stats_work;
> > @@ -65,6 +70,10 @@ struct virtio_balloon {
> > spinlock_t stop_update_lock;
> > bool stop_update;
> > + /* Stop reporting free pages */
> > + bool report_free_page_stop;
I would revert logic here: bool report_free_page;
> > + uint32_t free_page_cmd_id;
> > +
> > /* Waiting for host to ack the pages we released. */
> > wait_queue_head_t acked;
> > @@ -191,6 +200,30 @@ static void send_balloon_page_sg(struct virtio_balloon *vb,
> > kick_and_wait(vq, vb->acked);
> > }
> > +static void send_free_page_sg(struct virtqueue *vq, void *addr, uint32_t size)
> > +{
> > + int err = 0;
> > + unsigned int len;
> > +
> > + /* Detach all the used buffers from the vq */
> > + while (virtqueue_get_buf(vq, &len))
> > + ;
> > +
> > + /*
> > + * Since this is an optimization feature, losing a couple of free
> > + * pages to report isn't important. We simply resturn without adding
> > + * the page if the vq is full.
> > + */
> > + if (vq->num_free) {
> > + err = add_one_sg(vq, addr, size);
> > + BUG_ON(err);
> > + }
> > +
> > + /* Batch till the vq is full */
> > + if (!vq->num_free)
> > + virtqueue_kick(vq);
> > +}
> > +
> > /*
> > * Send balloon pages in sgs to host. The balloon pages are recorded in the
> > * page xbitmap. Each bit in the bitmap corresponds to a page of PAGE_SIZE.
> > @@ -495,9 +528,8 @@ static void stats_handle_request(struct virtio_balloon *vb)
> > virtqueue_kick(vq);
> > }
> > -static void virtballoon_changed(struct virtio_device *vdev)
> > +static void virtballoon_cmd_balloon_memory(struct virtio_balloon *vb)
> > {
> > - struct virtio_balloon *vb = vdev->priv;
> > unsigned long flags;
> > spin_lock_irqsave(&vb->stop_update_lock, flags);
> > @@ -506,6 +538,50 @@ static void virtballoon_changed(struct virtio_device *vdev)
> > spin_unlock_irqrestore(&vb->stop_update_lock, flags);
> > }
> > +static void virtballoon_cmd_report_free_page_start(struct virtio_balloon *vb)
> > +{
> > + unsigned long flags;
> > +
> > + vb->report_free_page_stop = false;
this flag is used a lot outside any locks. Why is this safe?
Please add some comments explaining access to this flag.
> > + spin_lock_irqsave(&vb->stop_update_lock, flags);
> > + if (!vb->stop_update)
> > + queue_work(vb->balloon_wq, &vb->report_free_page_work);
> > + spin_unlock_irqrestore(&vb->stop_update_lock, flags);
> > +}
> > +
> > +static void virtballoon_changed(struct virtio_device *vdev)
> > +{
> > + struct virtio_balloon *vb = vdev->priv;
> > + u32 host2guest_cmd, guest2host_cmd = 0;
> > +
> > + if (!virtio_has_feature(vdev, VIRTIO_BALLOON_F_FREE_PAGE_VQ)) {
> > + virtballoon_cmd_balloon_memory(vb);
> > + return;
This might be a handy feature: one can disable balloon without
hot-unplug. But I would use a separate feature flag to
control it.
> > + }
> > +
> > + virtio_cread(vb->vdev, struct virtio_balloon_config, host2guest_cmd,
> > + &host2guest_cmd);
> > +
> > + if (host2guest_cmd & VIRTIO_BALLOON_CMD_BALLOON_MEMORY) {
> > + virtballoon_cmd_balloon_memory(vb);
> > + guest2host_cmd |= VIRTIO_BALLOON_CMD_BALLOON_MEMORY;
> > + }
> > +
> > + if (host2guest_cmd & VIRTIO_BALLOON_CMD_REPORT_FREE_PAGE_START) {
> > + virtballoon_cmd_report_free_page_start(vb);
> > + guest2host_cmd |= VIRTIO_BALLOON_CMD_REPORT_FREE_PAGE_START;
> > + }
> > +
> > + if (host2guest_cmd & VIRTIO_BALLOON_CMD_REPORT_FREE_PAGE_STOP) {
> > + vb->report_free_page_stop = true;
> > + guest2host_cmd |= VIRTIO_BALLOON_CMD_REPORT_FREE_PAGE_STOP;
> > + }
I am not sure why free page has start+stop but e.g. balloon has a single
bit. In fact I would really just use command id. When it changes, we
know a new report is needed.
> > +
> > + /* Ack to the host about the commands that have been received */
> > + virtio_cwrite(vb->vdev, struct virtio_balloon_config, guest2host_cmd,
> > + &guest2host_cmd);
So the same register is used to ack stop command and to signal
end of report. This seems buggy.
> > +}
> > +
> > static inline s64 towards_target(struct virtio_balloon *vb)
> > {
> > s64 target;
> > @@ -597,42 +673,147 @@ static void update_balloon_size_func(struct work_struct *work)
> > queue_work(system_freezable_wq, work);
> > }
> > -static int init_vqs(struct virtio_balloon *vb)
> > +static bool virtio_balloon_send_free_pages(void *opaque, unsigned long pfn,
> > + unsigned long nr_pages)
> > {
> > - struct virtqueue *vqs[3];
> > - vq_callback_t *callbacks[] = { balloon_ack, balloon_ack, stats_request };
> > - static const char * const names[] = { "inflate", "deflate", "stats" };
> > - int err, nvqs;
> > + struct virtio_balloon *vb = (struct virtio_balloon *)opaque;
> > + void *addr = (void *)pfn_to_kaddr(pfn);
How do we know all free pages have a kaddr?
> > + uint32_t len = nr_pages << PAGE_SHIFT;
> > +
> > + if (vb->report_free_page_stop)
> > + return false;
> > +
> > + send_free_page_sg(vb->free_page_vq, addr, len);
> > + return true;
> > +}
> > +
> > +static void report_free_page_end(struct virtio_balloon *vb)
> > +{
> > + u32 cmd = VIRTIO_BALLOON_CMD_REPORT_FREE_PAGE_STOP;
> > /*
> > - * We expect two virtqueues: inflate and deflate, and
> > - * optionally stat.
> > + * The host may have already requested to stop the reporting before we
> > + * finish, so no need to notify the host in this case.
> > */
> > - nvqs = virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_STATS_VQ) ? 3 : 2;
> > - err = virtio_find_vqs(vb->vdev, nvqs, vqs, callbacks, names, NULL);
> > + if (vb->report_free_page_stop)
> > + return;
> > + vb->report_free_page_stop = true;
> > +
> > + virtio_cwrite(vb->vdev, struct virtio_balloon_config, guest2host_cmd,
> > + &cmd);
Wouldn't it be easier to add a buffer in the queue?
> > +}
> > +
> > +static void report_free_page_cmd_id(struct virtio_balloon *vb)
> > +{
> > + struct scatterlist sg;
> > + int err;
> > +
> > + virtio_cread(vb->vdev, struct virtio_balloon_config, free_page_cmd_id,
> > + &vb->free_page_cmd_id);
> > + sg_init_one(&sg, &vb->free_page_cmd_id, sizeof(uint32_t));
> > + err = virtqueue_add_outbuf(vb->free_page_vq, &sg, 1,
> > + &vb->free_page_cmd_id, GFP_KERNEL);
> > + BUG_ON(err);
> > +}
> > +
> > +static void report_free_page(struct work_struct *work)
> > +{
> > + struct virtio_balloon *vb;
> > +
> > + vb = container_of(work, struct virtio_balloon, report_free_page_work);
> > + report_free_page_cmd_id(vb);
> > + walk_free_mem_block(vb, 0, &virtio_balloon_send_free_pages);
> > + /*
> > + * The last few free page blocks that were added may not reach the
> > + * batch size, but need a kick to notify the device to handle them.
> > + */
> > + virtqueue_kick(vb->free_page_vq);
> > + report_free_page_end(vb);
> > +}
> > +
> > +static int init_vqs(struct virtio_balloon *vb)
> > +{
> > + struct virtqueue **vqs;
> > + vq_callback_t **callbacks;
> > + const char **names;
> > + struct scatterlist sg;
> > + int i, nvqs, err = -ENOMEM;
> > +
> > + /* Inflateq and deflateq are used unconditionally */
> > + nvqs = 2;
> > + if (virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_STATS_VQ))
> > + nvqs++;
> > + if (virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_FREE_PAGE_VQ))
> > + nvqs++;
> > +
> > + /* Allocate space for find_vqs parameters */
> > + vqs = kcalloc(nvqs, sizeof(*vqs), GFP_KERNEL);
> > + if (!vqs)
> > + goto err_vq;
> > + callbacks = kmalloc_array(nvqs, sizeof(*callbacks), GFP_KERNEL);
> > + if (!callbacks)
> > + goto err_callback;
> > + names = kmalloc_array(nvqs, sizeof(*names), GFP_KERNEL);
> > + if (!names)
> > + goto err_names;
> > +
> > + callbacks[0] = balloon_ack;
> > + names[0] = "inflate";
> > + callbacks[1] = balloon_ack;
> > + names[1] = "deflate";
> > +
> > + i = 2;
> > + if (virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_STATS_VQ)) {
> > + callbacks[i] = stats_request;
> > + names[i] = "stats";
> > + i++;
> > + }
> > +
> > + if (virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_FREE_PAGE_VQ)) {
> > + callbacks[i] = NULL;
> > + names[i] = "free_page_vq";
> > + }
> > +
> > + err = vb->vdev->config->find_vqs(vb->vdev, nvqs, vqs, callbacks, names,
> > + NULL, NULL);
> > if (err)
> > - return err;
> > + goto err_find;
> > vb->inflate_vq = vqs[0];
> > vb->deflate_vq = vqs[1];
> > + i = 2;
> > if (virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_STATS_VQ)) {
> > - struct scatterlist sg;
> > - unsigned int num_stats;
> > - vb->stats_vq = vqs[2];
> > -
> > + vb->stats_vq = vqs[i++];
> > /*
> > * Prime this virtqueue with one buffer so the hypervisor can
> > * use it to signal us later (it can't be broken yet!).
> > */
> > - num_stats = update_balloon_stats(vb);
> > -
> > - sg_init_one(&sg, vb->stats, sizeof(vb->stats[0]) * num_stats);
> > + sg_init_one(&sg, vb->stats, sizeof(vb->stats));
> > if (virtqueue_add_outbuf(vb->stats_vq, &sg, 1, vb, GFP_KERNEL)
> > - < 0)
> > - BUG();
> > + < 0) {
> > + dev_warn(&vb->vdev->dev, "%s: add stat_vq failed\n",
> > + __func__);
> > + goto err_find;
> > + }
> > virtqueue_kick(vb->stats_vq);
> > }
> > +
> > + if (virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_FREE_PAGE_VQ))
> > + vb->free_page_vq = vqs[i];
> > +
> > + kfree(names);
> > + kfree(callbacks);
> > + kfree(vqs);
> > return 0;
> > +
> > +err_find:
> > + kfree(names);
> > +err_names:
> > + kfree(callbacks);
> > +err_callback:
> > + kfree(vqs);
> > +err_vq:
> > + return err;
> > }
> > #ifdef CONFIG_BALLOON_COMPACTION
> > @@ -761,6 +942,13 @@ static int virtballoon_probe(struct virtio_device *vdev)
> > if (virtio_has_feature(vdev, VIRTIO_BALLOON_F_SG))
> > xb_init(&vb->page_xb);
> > + if (virtio_has_feature(vdev, VIRTIO_BALLOON_F_FREE_PAGE_VQ)) {
> > + vb->balloon_wq = alloc_workqueue("balloon-wq",
> > + WQ_FREEZABLE | WQ_CPU_INTENSIVE, 0);
> > + INIT_WORK(&vb->report_free_page_work, report_free_page);
> > + vb->report_free_page_stop = true;
> > + }
> > +
> > vb->nb.notifier_call = virtballoon_oom_notify;
> > vb->nb.priority = VIRTBALLOON_OOM_NOTIFY_PRIORITY;
> > err = register_oom_notifier(&vb->nb);
> > @@ -825,6 +1013,7 @@ static void virtballoon_remove(struct virtio_device *vdev)
> > spin_unlock_irq(&vb->stop_update_lock);
> > cancel_work_sync(&vb->update_balloon_size_work);
> > cancel_work_sync(&vb->update_balloon_stats_work);
> > + cancel_work_sync(&vb->report_free_page_work);
> > remove_common(vb);
> > #ifdef CONFIG_BALLOON_COMPACTION
> > @@ -878,6 +1067,7 @@ static unsigned int features[] = {
> > VIRTIO_BALLOON_F_STATS_VQ,
> > VIRTIO_BALLOON_F_DEFLATE_ON_OOM,
> > VIRTIO_BALLOON_F_SG,
> > + VIRTIO_BALLOON_F_FREE_PAGE_VQ,
> > };
> > static struct virtio_driver virtio_balloon_driver = {
> > diff --git a/include/uapi/linux/virtio_balloon.h b/include/uapi/linux/virtio_balloon.h
> > index 37780a7..b758484 100644
> > --- a/include/uapi/linux/virtio_balloon.h
> > +++ b/include/uapi/linux/virtio_balloon.h
> > @@ -35,15 +35,26 @@
> > #define VIRTIO_BALLOON_F_STATS_VQ 1 /* Memory Stats virtqueue */
> > #define VIRTIO_BALLOON_F_DEFLATE_ON_OOM 2 /* Deflate balloon on OOM */
> > #define VIRTIO_BALLOON_F_SG 3 /* Use sg instead of PFN lists */
> > +#define VIRTIO_BALLOON_F_FREE_PAGE_VQ 4 /* VQ to report free pages */
> > /* Size of a PFN in the balloon interface. */
> > #define VIRTIO_BALLOON_PFN_SHIFT 12
> > +#define VIRTIO_BALLOON_CMD_BALLOON_MEMORY (1 << 0)
> > +#define VIRTIO_BALLOON_CMD_REPORT_FREE_PAGE_START (1 << 1)
> > +#define VIRTIO_BALLOON_CMD_REPORT_FREE_PAGE_STOP (1 << 2)
> > +
> > struct virtio_balloon_config {
> > /* Number of pages host wants Guest to give up. */
> > __u32 num_pages;
> > /* Number of pages we've actually got in balloon. */
> > __u32 actual;
> > + /* Host-to-guest command, readonly by guest */
> > + __u32 host2guest_cmd;
> > + /* Sequence id of the free_page report command, readonly by guest */
> > + __u32 free_page_cmd_id;
> > + /* Guest-to-host command */
> > + __u32 guest2host_cmd;
> > };
> > #define VIRTIO_BALLOON_S_SWAP_IN 0 /* Amount of memory swapped in */
_______________________________________________
Virtualization mailing list
Virtualization@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
