On Fri, Feb 17, 2017 at 01:10:08PM +0800, Jason Wang wrote:
>
>
> On 2017年02月17日 12:53, John Fastabend wrote:
> > On 17-02-15 01:08 AM, Jason Wang wrote:
> > > We set queues before reset which will cause a crash[1]. This is
> > > because is_xdp_raw_buffer_queue() depends on the old xdp queue pairs
> > > number to do the correct detection. So fix this by:
> > >
> > > - set queues after reset, to keep the old vi->curr_queue_pairs. (in
> > > fact setting queues before reset does not works since after feature
> > > set, all queue pairs were enabled by default during reset).
> > > - change xdp_queue_pairs only after virtnet_reset() is succeed.
> > >
> > > [1]
> > I'm guessing this occurs when enabling XDP while receiving lots of traffic?
>
> I hit this then disabling XDP while receiving lots of traffic.
>
> >
> > > [ 74.328168] general protection fault: 0000 [#1] SMP
> > > [ 74.328625] Modules linked in: nfsd xfs libcrc32c virtio_net virtio_pci
> > > [ 74.329117] CPU: 0 PID: 2849 Comm: xdp2 Not tainted 4.10.0-rc7+ #499
> > > [ 74.329577] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.1-0-g8891697-prebuilt.qemu-project.org 04/01/2014
> > > [ 74.330424] task: ffff88007a894000 task.stack: ffffc90004388000
> > > [ 74.330844] RIP: 0010:skb_release_head_state+0x28/0x80
> > > [ 74.331298] RSP: 0018:ffffc9000438b8d0 EFLAGS: 00010206
> > > [ 74.331676] RAX: 0000000000000000 RBX: ffff88007ad96300 RCX: 0000000000000000
> > > [ 74.332217] RDX: ffff88007fc137a8 RSI: ffff88007fc0db28 RDI: 0001bf00000001be
> > > [ 74.332758] RBP: ffffc9000438b8d8 R08: 000000000005008f R09: 00000000000005f9
> > > [ 74.333274] R10: ffff88007d001700 R11: ffffffff820a8a4d R12: ffff88007ad96300
> > > [ 74.333787] R13: 0000000000000002 R14: ffff880036604000 R15: 000077ff80000000
> > > [ 74.334308] FS: 00007fc70d8a7b40(0000) GS:ffff88007fc00000(0000) knlGS:0000000000000000
> > > [ 74.334891] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> > > [ 74.335314] CR2: 00007fff4144a710 CR3: 000000007ab56000 CR4: 00000000003406f0
> > > [ 74.335830] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> > > [ 74.336373] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
> > > [ 74.336895] Call Trace:
> > > [ 74.337086] skb_release_all+0xd/0x30
> > > [ 74.337356] consume_skb+0x2c/0x90
> > > [ 74.337607] free_unused_bufs+0x1ff/0x270 [virtio_net]
> > > [ 74.337988] ? vp_synchronize_vectors+0x3b/0x60 [virtio_pci]
> > > [ 74.338398] virtnet_xdp+0x21e/0x440 [virtio_net]
> > > [ 74.338741] dev_change_xdp_fd+0x101/0x140
> > > [ 74.339048] do_setlink+0xcf4/0xd20
> > > [ 74.339304] ? symcmp+0xf/0x20
> > > [ 74.339529] ? mls_level_isvalid+0x52/0x60
> > > [ 74.339828] ? mls_range_isvalid+0x43/0x50
> > > [ 74.340135] ? nla_parse+0xa0/0x100
> > > [ 74.340400] rtnl_setlink+0xd4/0x120
> > > [ 74.340664] ? cpumask_next_and+0x30/0x50
> > > [ 74.340966] rtnetlink_rcv_msg+0x7f/0x1f0
> > > [ 74.341259] ? sock_has_perm+0x59/0x60
> > > [ 74.341586] ? napi_consume_skb+0xe2/0x100
> > > [ 74.342010] ? rtnl_newlink+0x890/0x890
> > > [ 74.342435] netlink_rcv_skb+0x92/0xb0
> > > [ 74.342846] rtnetlink_rcv+0x23/0x30
> > > [ 74.343277] netlink_unicast+0x162/0x210
> > > [ 74.343677] netlink_sendmsg+0x2db/0x390
> > > [ 74.343968] sock_sendmsg+0x33/0x40
> > > [ 74.344233] SYSC_sendto+0xee/0x160
> > > [ 74.344482] ? SYSC_bind+0xb0/0xe0
> > > [ 74.344806] ? sock_alloc_file+0x92/0x110
> > > [ 74.345106] ? fd_install+0x20/0x30
> > > [ 74.345360] ? sock_map_fd+0x3f/0x60
> > > [ 74.345586] SyS_sendto+0x9/0x10
> > > [ 74.345790] entry_SYSCALL_64_fastpath+0x1a/0xa9
> > > [ 74.346086] RIP: 0033:0x7fc70d1b8f6d
> > > [ 74.346312] RSP: 002b:00007fff4144a708 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
> > > [ 74.346785] RAX: ffffffffffffffda RBX: 00000000ffffffff RCX: 00007fc70d1b8f6d
> > > [ 74.347244] RDX: 000000000000002c RSI: 00007fff4144a720 RDI: 0000000000000003
> > > [ 74.347683] RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000000
> > > [ 74.348544] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fff4144bd90
> > > [ 74.349082] R13: 0000000000000002 R14: 0000000000000002 R15: 00007fff4144cda0
> > > [ 74.349607] Code: 00 00 00 55 48 89 e5 53 48 89 fb 48 8b 7f 58 48 85 ff 74 0e 40 f6 c7 01 74 3d 48 c7 43 58 00 00 00 00 48 8b 7b 68 48 85 ff 74 05 <f0> ff 0f 74 20 48 8b 43 60 48 85 c0 74 14 65 8b 15 f3 ab 8d 7e
> > > [ 74.351008] RIP: skb_release_head_state+0x28/0x80 RSP: ffffc9000438b8d0
> > > [ 74.351625] ---[ end trace fe6e19fd11cfc80b ]---
> > >
> > > Fixes: 2de2f7f40ef9 ("virtio_net: XDP support for adjust_head")
> > > Cc: John Fastabend <john.fastabend@xxxxxxxxx>
> > > Signed-off-by: Jason Wang <jasowang@xxxxxxxxxx>
> > > ---
> > > drivers/net/virtio_net.c | 35 ++++++++++++++++++-----------------
> > > 1 file changed, 18 insertions(+), 17 deletions(-)
> > >
> > > diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
> > > index 11e2853..9ff959c 100644
> > > --- a/drivers/net/virtio_net.c
> > > +++ b/drivers/net/virtio_net.c
> > > @@ -1775,7 +1775,7 @@ static int virtnet_xdp_set(struct net_device *dev, struct bpf_prog *prog)
> > > unsigned long int max_sz = PAGE_SIZE - sizeof(struct padded_vnet_hdr);
> > > struct virtnet_info *vi = netdev_priv(dev);
> > > struct bpf_prog *old_prog;
> > > - u16 oxdp_qp, xdp_qp = 0, curr_qp;
> > > + u16 xdp_qp = 0, curr_qp;
> > > int i, err;
> > > if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_GUEST_TSO4) ||
> > > @@ -1813,24 +1813,24 @@ static int virtnet_xdp_set(struct net_device *dev, struct bpf_prog *prog)
> > > return PTR_ERR(prog);
> > > }
> > > - err = _virtnet_set_queues(vi, curr_qp + xdp_qp);
> > > - if (err) {
> > > - dev_warn(&dev->dev, "XDP Device queue allocation failure.\n");
> > > - goto virtio_queue_err;
> > > - }
> > > -
> > > - oxdp_qp = vi->xdp_queue_pairs;
> > > -
> > > /* Changing the headroom in buffers is a disruptive operation because
> > > * existing buffers must be flushed and reallocated. This will happen
> > > * when a xdp program is initially added or xdp is disabled by removing
> > > * the xdp program resulting in number of XDP queues changing.
> > > */
> > > if (vi->xdp_queue_pairs != xdp_qp) {
> > > - vi->xdp_queue_pairs = xdp_qp;
> > > err = virtnet_reset(vi);
> > > - if (err)
> > > + if (err) {
> > > + dev_warn(&dev->dev, "XDP reset failure.\n");
> > > goto virtio_reset_err;
> > > + }
> > > + vi->xdp_queue_pairs = xdp_qp;
> > But xdp_queue_pairs is being used to detect if we should allocate the XDP
> > headroom. If we move it here do we have a set of buffers in the ring without
> > the proper headroom when we assign the xdp program below?
>
> Right, so how about passing xdp_queue_pairs as a parameter to
> virtnet_reset(). Then virtnet_reset() can set it after _remove_vq_common()
> but before virtnet_restore_up()?
>
> Thanks
Jason, wouldn't you say it's cleaner to avoid resets?
Would you be interested in completing this work:
20170207053455-mutt-send-email-mst@xxxxxxxxxx
> >
> > > + }
> > > +
> > > + err = _virtnet_set_queues(vi, curr_qp + xdp_qp);
> > > + if (err) {
> > > + dev_warn(&dev->dev, "XDP Device queue allocation failure.\n");
> > > + goto virtio_queue_err;
> > > }
> > > netif_set_real_num_rx_queues(dev, curr_qp + xdp_qp);
> > > @@ -1844,17 +1844,18 @@ static int virtnet_xdp_set(struct net_device *dev, struct bpf_prog *prog)
> > > return 0;
> > Thanks,
> > John
> >
_______________________________________________
Virtualization mailing list
Virtualization@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
