Re: [PATCH 2/3] qemu: Implement virtio-pstore device

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Sep 16, 2016 at 07:05:47PM +0900, Namhyung Kim wrote:
> On Tue, Sep 13, 2016 at 06:57:10PM +0300, Michael S. Tsirkin wrote:
> > On Sat, Aug 20, 2016 at 05:07:43PM +0900, Namhyung Kim wrote:
> > > Add virtio pstore device to allow kernel log files saved on the host.
> > > It will save the log files on the directory given by pstore device
> > > option.
> > > 
> > >   $ qemu-system-x86_64 -device virtio-pstore,directory=dir-xx ...
> > > 
> > >   (guest) # echo c > /proc/sysrq-trigger
> > > 
> > >   $ ls dir-xx
> > >   dmesg-1.enc.z  dmesg-2.enc.z
> > > 
> > > The log files are usually compressed using zlib.  Users can see the log
> > > messages directly on the host or on the guest (using pstore filesystem).
> > > 
> > > The 'directory' property is required for virtio-pstore device to work.
> > > It also adds 'bufsize' property to set size of pstore bufer.
> > > 
> > > Cc: Paolo Bonzini <pbonzini@xxxxxxxxxx>
> > > Cc: Radim Krčmář <rkrcmar@xxxxxxxxxx>
> > > Cc: "Michael S. Tsirkin" <mst@xxxxxxxxxx>
> > > Cc: Anthony Liguori <aliguori@xxxxxxxxxx>
> > > Cc: Anton Vorontsov <anton@xxxxxxxxxx>
> > > Cc: Colin Cross <ccross@xxxxxxxxxxx>
> > > Cc: Kees Cook <keescook@xxxxxxxxxxxx>
> > > Cc: Tony Luck <tony.luck@xxxxxxxxx>
> > > Cc: Steven Rostedt <rostedt@xxxxxxxxxxx>
> > > Cc: Ingo Molnar <mingo@xxxxxxxxxx>
> > > Cc: Minchan Kim <minchan@xxxxxxxxxx>
> > > Cc: Daniel P. Berrange <berrange@xxxxxxxxxx>
> > > Cc: kvm@xxxxxxxxxxxxxxx
> > > Cc: qemu-devel@xxxxxxxxxx
> > > Cc: virtualization@xxxxxxxxxxxxxxxxxxxxxxxxxx
> > > Signed-off-by: Namhyung Kim <namhyung@xxxxxxxxxx>
> > > ---
> > >  hw/virtio/Makefile.objs                        |   2 +-
> > >  hw/virtio/virtio-pci.c                         |  52 ++
> > >  hw/virtio/virtio-pci.h                         |  14 +
> > >  hw/virtio/virtio-pstore.c                      | 699 +++++++++++++++++++++++++
> > >  include/hw/pci/pci.h                           |   1 +
> > >  include/hw/virtio/virtio-pstore.h              |  36 ++
> > >  include/standard-headers/linux/virtio_ids.h    |   1 +
> > >  include/standard-headers/linux/virtio_pstore.h |  76 +++
> > >  qdev-monitor.c                                 |   1 +
> > >  9 files changed, 881 insertions(+), 1 deletion(-)
> > >  create mode 100644 hw/virtio/virtio-pstore.c
> > >  create mode 100644 include/hw/virtio/virtio-pstore.h
> > >  create mode 100644 include/standard-headers/linux/virtio_pstore.h
> > > 
> > > diff --git a/hw/virtio/Makefile.objs b/hw/virtio/Makefile.objs
> > > index 3e2b175..aae7082 100644
> > > --- a/hw/virtio/Makefile.objs
> > > +++ b/hw/virtio/Makefile.objs
> > > @@ -4,4 +4,4 @@ common-obj-y += virtio-bus.o
> > >  common-obj-y += virtio-mmio.o
> > >  
> > >  obj-y += virtio.o virtio-balloon.o 
> > > -obj-$(CONFIG_LINUX) += vhost.o vhost-backend.o vhost-user.o
> > > +obj-$(CONFIG_LINUX) += vhost.o vhost-backend.o vhost-user.o virtio-pstore.o
> > > diff --git a/hw/virtio/virtio-pci.c b/hw/virtio/virtio-pci.c
> > > index 755f921..c184823 100644
> > > --- a/hw/virtio/virtio-pci.c
> > > +++ b/hw/virtio/virtio-pci.c
> > > @@ -2416,6 +2416,57 @@ static const TypeInfo virtio_host_pci_info = {
> > >  };
> > >  #endif
> > >  
> > > +/* virtio-pstore-pci */
> > > +
> > > +static void virtio_pstore_pci_realize(VirtIOPCIProxy *vpci_dev, Error **errp)
> > > +{
> > > +    VirtIOPstorePCI *vps = VIRTIO_PSTORE_PCI(vpci_dev);
> > > +    DeviceState *vdev = DEVICE(&vps->vdev);
> > > +    Error *err = NULL;
> > > +
> > > +    qdev_set_parent_bus(vdev, BUS(&vpci_dev->bus));
> > > +    object_property_set_bool(OBJECT(vdev), true, "realized", &err);
> > > +    if (err) {
> > > +        error_propagate(errp, err);
> > > +        return;
> > > +    }
> > > +}
> > > +
> > > +static void virtio_pstore_pci_class_init(ObjectClass *klass, void *data)
> > > +{
> > > +    DeviceClass *dc = DEVICE_CLASS(klass);
> > > +    VirtioPCIClass *k = VIRTIO_PCI_CLASS(klass);
> > > +    PCIDeviceClass *pcidev_k = PCI_DEVICE_CLASS(klass);
> > > +
> > > +    k->realize = virtio_pstore_pci_realize;
> > > +    set_bit(DEVICE_CATEGORY_MISC, dc->categories);
> > > +
> > > +    pcidev_k->vendor_id = PCI_VENDOR_ID_REDHAT_QUMRANET;
> > > +    pcidev_k->device_id = PCI_DEVICE_ID_VIRTIO_PSTORE;
> > > +    pcidev_k->revision = VIRTIO_PCI_ABI_VERSION;
> > > +    pcidev_k->class_id = PCI_CLASS_OTHERS;
> > > +}
> > > +
> > > +static void virtio_pstore_pci_instance_init(Object *obj)
> > > +{
> > > +    VirtIOPstorePCI *dev = VIRTIO_PSTORE_PCI(obj);
> > > +
> > > +    virtio_instance_init_common(obj, &dev->vdev, sizeof(dev->vdev),
> > > +                                TYPE_VIRTIO_PSTORE);
> > > +    object_property_add_alias(obj, "directory", OBJECT(&dev->vdev),
> > > +                              "directory", &error_abort);
> > > +    object_property_add_alias(obj, "bufsize", OBJECT(&dev->vdev),
> > > +                              "bufsize", &error_abort);
> > > +}
> > > +
> > > +static const TypeInfo virtio_pstore_pci_info = {
> > > +    .name          = TYPE_VIRTIO_PSTORE_PCI,
> > > +    .parent        = TYPE_VIRTIO_PCI,
> > > +    .instance_size = sizeof(VirtIOPstorePCI),
> > > +    .instance_init = virtio_pstore_pci_instance_init,
> > > +    .class_init    = virtio_pstore_pci_class_init,
> > > +};
> > > +
> > >  /* virtio-pci-bus */
> > >  
> > >  static void virtio_pci_bus_new(VirtioBusState *bus, size_t bus_size,
> > > @@ -2485,6 +2536,7 @@ static void virtio_pci_register_types(void)
> > >  #ifdef CONFIG_VHOST_SCSI
> > >      type_register_static(&vhost_scsi_pci_info);
> > >  #endif
> > > +    type_register_static(&virtio_pstore_pci_info);
> > >  }
> > >  
> > >  type_init(virtio_pci_register_types)
> > > diff --git a/hw/virtio/virtio-pci.h b/hw/virtio/virtio-pci.h
> > > index 25fbf8a..354b2b7 100644
> > > --- a/hw/virtio/virtio-pci.h
> > > +++ b/hw/virtio/virtio-pci.h
> > > @@ -31,6 +31,7 @@
> > >  #ifdef CONFIG_VHOST_SCSI
> > >  #include "hw/virtio/vhost-scsi.h"
> > >  #endif
> > > +#include "hw/virtio/virtio-pstore.h"
> > >  
> > >  typedef struct VirtIOPCIProxy VirtIOPCIProxy;
> > >  typedef struct VirtIOBlkPCI VirtIOBlkPCI;
> > > @@ -44,6 +45,7 @@ typedef struct VirtIOInputPCI VirtIOInputPCI;
> > >  typedef struct VirtIOInputHIDPCI VirtIOInputHIDPCI;
> > >  typedef struct VirtIOInputHostPCI VirtIOInputHostPCI;
> > >  typedef struct VirtIOGPUPCI VirtIOGPUPCI;
> > > +typedef struct VirtIOPstorePCI VirtIOPstorePCI;
> > >  
> > >  /* virtio-pci-bus */
> > >  
> > > @@ -324,6 +326,18 @@ struct VirtIOGPUPCI {
> > >      VirtIOGPU vdev;
> > >  };
> > >  
> > > +/*
> > > + * virtio-pstore-pci: This extends VirtioPCIProxy.
> > > + */
> > > +#define TYPE_VIRTIO_PSTORE_PCI "virtio-pstore-pci"
> > > +#define VIRTIO_PSTORE_PCI(obj) \
> > > +        OBJECT_CHECK(VirtIOPstorePCI, (obj), TYPE_VIRTIO_PSTORE_PCI)
> > > +
> > > +struct VirtIOPstorePCI {
> > > +    VirtIOPCIProxy parent_obj;
> > > +    VirtIOPstore vdev;
> > > +};
> > > +
> > >  /* Virtio ABI version, if we increment this, we break the guest driver. */
> > >  #define VIRTIO_PCI_ABI_VERSION          0
> > >  
> > > diff --git a/hw/virtio/virtio-pstore.c b/hw/virtio/virtio-pstore.c
> > > new file mode 100644
> > > index 0000000..b8fb4be
> > > --- /dev/null
> > > +++ b/hw/virtio/virtio-pstore.c
> > > @@ -0,0 +1,699 @@
> > > +/*
> > > + * Virtio Pstore Device
> > > + *
> > > + * Copyright (C) 2016  LG Electronics
> > > + *
> > > + * Authors:
> > > + *  Namhyung Kim  <namhyung@xxxxxxxxx>
> > > + *
> > > + * This work is licensed under the terms of the GNU GPL, version 2 or later.
> > > + * See the COPYING file in the top-level directory.
> > > + *
> > > + */
> > > +
> > > +#include <stdio.h>
> > > +
> > > +#include "qemu/osdep.h"
> > > +#include "qemu/iov.h"
> > > +#include "qemu-common.h"
> > > +#include "qemu/cutils.h"
> > > +#include "qemu/error-report.h"
> > > +#include "sysemu/kvm.h"
> > > +#include "qapi/visitor.h"
> > > +#include "qapi-event.h"
> > > +#include "io/channel-util.h"
> > > +#include "trace.h"
> > > +
> > > +#include "hw/virtio/virtio.h"
> > > +#include "hw/virtio/virtio-bus.h"
> > > +#include "hw/virtio/virtio-access.h"
> > > +#include "hw/virtio/virtio-pstore.h"
> > > +
> > > +#define PSTORE_DEFAULT_BUFSIZE   (16 * 1024)
> > > +#define PSTORE_DEFAULT_FILE_MAX  5
> > > +
> > > +/* the index should match to the type value */
> > > +static const char *virtio_pstore_file_prefix[] = {
> > > +    "unknown-",		/* VIRTIO_PSTORE_TYPE_UNKNOWN */
> > 
> > Is there value in treating everything unexpected as "unknown"
> > and rotating them as if they were logs?
> > It might be better to treat everything that's not known
> > as guest error.
> 
> I was thinking about the version mismatch between the kernel and qemu.
> I'd like to make the device can deal with a new kernel version which
> might implement a new pstore message type.  It will be saved as
> unknown but the kernel can read it properly later.

Well it'll have a different prefix. E.g. if kernel has
two different types they will end up in the same
file, hardly what was wanted.


> > 
> > 
> > > +    "dmesg-",		/* VIRTIO_PSTORE_TYPE_DMESG */
> > 
> > use named initializers for this instead of comments.
> 
> Ok.
> 
> > 
> > > +};
> > > +
> > > +static char *virtio_pstore_to_filename(VirtIOPstore *s,
> > > +                                       struct virtio_pstore_req *req)
> > > +{
> > > +    const char *basename;
> > > +    unsigned long long id;
> > > +    unsigned int type = le16_to_cpu(req->type);
> > > +    unsigned int flags = le32_to_cpu(req->flags);
> > > +
> > > +    if (type < ARRAY_SIZE(virtio_pstore_file_prefix)) {
> > > +        basename = virtio_pstore_file_prefix[type];
> > > +    } else {
> > > +        basename = "unknown-";
> > > +    }
> > > +
> > > +    id = s->id++;
> > > +    return g_strdup_printf("%s/%s%llu%s", s->directory, basename, id,
> > > +                            flags & VIRTIO_PSTORE_FL_COMPRESSED ? ".enc.z" : "");
> > > +}
> > > +
> > > +static char *virtio_pstore_from_filename(VirtIOPstore *s, char *name,
> > > +                                         struct virtio_pstore_fileinfo *info)
> > > +{
> > > +    char *filename;
> > > +    unsigned int idx;
> > > +
> > > +    filename = g_strdup_printf("%s/%s", s->directory, name);
> > > +    if (filename == NULL)
> > > +        return NULL;
> > > +
> > > +    for (idx = 0; idx < ARRAY_SIZE(virtio_pstore_file_prefix); idx++) {
> > > +        if (g_str_has_prefix(name, virtio_pstore_file_prefix[idx])) {
> > > +            info->type = idx;
> > > +            name += strlen(virtio_pstore_file_prefix[idx]);
> > > +            break;
> > > +        }
> > > +    }
> > > +
> > > +    if (idx == ARRAY_SIZE(virtio_pstore_file_prefix)) {
> > > +        g_free(filename);
> > > +        return NULL;
> > > +    }
> > > +
> > > +    qemu_strtoull(name, NULL, 0, &info->id);
> > 
> > What if this fails?
> 
> Hmm.. will add a check for return value then.
> 
> > 
> > > +
> > > +    info->flags = 0;
> > > +    if (g_str_has_suffix(name, ".enc.z")) {
> > > +        info->flags |= VIRTIO_PSTORE_FL_COMPRESSED;
> > > +    }
> > > +
> > > +    return filename;
> > > +}
> > > +
> > > +static int prefix_idx;
> > > +static int prefix_count;
> > > +static int prefix_len;
> > This does not work properly if there are multiple instances
> > of it. Pls move everything into device state.
> 
> Kernel (currently?) allows only a single pstore device active.  But I
> think it'd be better to move them into device state anyway.
> 
> > 
> > > +
> > > +static int filter_pstore(const struct dirent *de)
> > > +{
> > > +    int i;
> > > +
> > > +    for (i = 0; i < prefix_count; i++) {
> > > +        const char *prefix = virtio_pstore_file_prefix[prefix_idx + i];
> > > +
> > > +        if (g_str_has_prefix(de->d_name, prefix)) {
> > > +            return 1;
> > > +        }
> > > +    }
> > > +    return 0;
> > > +}
> > > +
> > > +static int sort_pstore(const struct dirent **a, const struct dirent **b)
> > > +{
> > > +    uint64_t id_a, id_b;
> > > +
> > > +    qemu_strtoull((*a)->d_name + prefix_len, NULL, 0, &id_a);
> > > +    qemu_strtoull((*b)->d_name + prefix_len, NULL, 0, &id_b);
> > > +
> > > +    return id_a - id_b;
> > > +}
> > > +
> > > +static int rotate_pstore_file(VirtIOPstore *s, unsigned short type)
> > > +{
> > > +    int ret = 0;
> > > +    int i, num;
> > > +    char *filename;
> > > +    struct dirent **files;
> > > +
> > > +    if (type >= ARRAY_SIZE(virtio_pstore_file_prefix)) {
> > > +        type = VIRTIO_PSTORE_TYPE_UNKNOWN;
> > > +    }
> > > +
> > > +    prefix_idx = type;
> > > +    prefix_len = strlen(virtio_pstore_file_prefix[type]);
> > > +    prefix_count = 1;  /* only scan current type */
> > > +
> > > +    /* delete the oldest file in the same type */
> > > +    num = scandir(s->directory, &files, filter_pstore, sort_pstore);
> > > +    if (num < 0)
> > > +        return num;
> > > +    if (num < (int)s->file_max)
> > > +        goto out;
> > > +
> > > +    filename = g_strdup_printf("%s/%s", s->directory, files[0]->d_name);
> > > +    if (filename == NULL) {
> > > +        ret = -1;
> > > +        goto out;
> > > +    }
> > > +
> > > +    ret = unlink(filename);
> > > +
> > > +out:
> > > +    for (i = 0; i < num; i++) {
> > > +        g_free(files[i]);
> > > +    }
> > > +    g_free(files);
> > > +
> > > +    return ret;
> > > +}
> > 
> > Pls prefix everything with virtio_pstore or another
> > unique prefix. also below.
> 
> Ok.
> 
> > 
> > > +
> > > +static ssize_t virtio_pstore_do_open(VirtIOPstore *s)
> > > +{
> > > +    /* scan all pstore files */
> > > +    prefix_idx = 0;
> > > +    prefix_count = ARRAY_SIZE(virtio_pstore_file_prefix);
> > > +
> > > +    s->file_idx = 0;
> > > +    s->num_file = scandir(s->directory, &s->files, filter_pstore, alphasort);
> > > +
> > > +    return s->num_file >= 0 ? 0 : -1;
> > > +}
> > > +
> > > +static ssize_t virtio_pstore_do_close(VirtIOPstore *s)
> > > +{
> > > +    int i;
> > > +
> > > +    for (i = 0; i < s->num_file; i++) {
> > > +        g_free(s->files[i]);
> > > +    }
> > > +    g_free(s->files);
> > > +    s->files = NULL;
> > > +
> > > +    s->num_file = 0;
> > > +    return 0;
> > > +}
> > > +
> > > +static ssize_t virtio_pstore_do_erase(VirtIOPstore *s,
> > > +                                      struct virtio_pstore_req *req)
> > > +{
> > > +    char *filename;
> > > +    int ret;
> > > +
> > > +    filename = virtio_pstore_to_filename(s, req);
> > > +    if (filename == NULL)
> > > +        return -1;
> > 
> > this can't happen.
> 
> Why?  The virtio_pstore_to_filename() calls g_strdup_printf().  That
> means I don't need to worry about the memory allocation failure?
> 
> > 
> > also this is a coding style violation.
> 
> Oh, I missed the add {}, will fix.
> 
> > 
> > > +
> > > +    ret = unlink(filename);
> > > +
> > > +    g_free(filename);
> > > +    return ret;
> > > +}
> > > +
> > > +struct pstore_read_arg {
> > > +    VirtIOPstore *vps;
> > > +    VirtQueueElement *elem;
> > > +    struct virtio_pstore_fileinfo info;
> > > +    QIOChannel *ioc;
> > > +};
> > > +
> > > +static gboolean pstore_async_read_fn(QIOChannel *ioc, GIOCondition condition,
> > > +                                     gpointer data)
> > > +{
> > > +    struct pstore_read_arg *rarg = data;
> > > +    struct virtio_pstore_fileinfo *info = &rarg->info;
> > > +    VirtIOPstore *vps = rarg->vps;
> > > +    VirtQueueElement *elem = rarg->elem;
> > > +    struct virtio_pstore_res res;
> > > +    size_t offset = sizeof(res) + sizeof(*info);
> > > +    struct iovec *sg = elem->in_sg;
> > > +    unsigned int sg_num = elem->in_num;
> > > +    Error *err = NULL;
> > > +    ssize_t len;
> > > +    int ret;
> > > +
> > > +    /* skip res and fileinfo */
> > > +    iov_discard_front(&sg, &sg_num, sizeof(res) + sizeof(*info));
> > > +
> > > +    len = qio_channel_readv(rarg->ioc, sg, sg_num, &err);
> > > +    if (len < 0) {
> > > +        if (errno == EAGAIN) {
> > > +            len = 0;
> > > +        }
> > > +        ret = -1;
> > > +    } else {
> > > +        info->len = cpu_to_le32(len);
> > > +        ret = 0;
> > > +    }
> > > +
> > > +    res.cmd  = cpu_to_le16(VIRTIO_PSTORE_CMD_READ);
> > > +    res.type = cpu_to_le16(VIRTIO_PSTORE_TYPE_UNKNOWN);
> > > +    res.ret  = cpu_to_le32(ret);
> > > +
> > > +    /* now copy res and fileinfo */
> > > +    iov_from_buf(elem->in_sg, elem->in_num, 0, &res, sizeof(res));
> > > +    iov_from_buf(elem->in_sg, elem->in_num, sizeof(res), info, sizeof(*info));
> > > +
> > > +    len += offset;
> > > +    virtqueue_push(vps->rvq, elem, len);
> > > +    virtio_notify(VIRTIO_DEVICE(vps), vps->rvq);
> > > +
> > > +    return G_SOURCE_REMOVE;
> > > +}
> > > +
> > > +static void free_rarg_fn(gpointer data)
> > > +{
> > > +    struct pstore_read_arg *rarg = data;
> > > +
> > > +    qio_channel_close(rarg->ioc, NULL);
> > > +
> > > +    g_free(rarg->elem);
> > > +    g_free(rarg);
> > > +}
> > > +
> > > +static ssize_t virtio_pstore_do_read(VirtIOPstore *s, VirtQueueElement *elem)
> > > +{
> > > +    char *filename = NULL;
> > > +    int fd, idx;
> > > +    struct stat stbuf;
> > > +    struct pstore_read_arg *rarg = NULL;
> > > +    Error *err = NULL;
> > > +    int ret = -1;
> > > +
> > > +    if (s->file_idx >= s->num_file) {
> > > +        return 0;
> > > +    }
> > > +
> > > +    rarg = g_malloc(sizeof(*rarg));
> > > +    if (rarg == NULL) {
> > > +        return -1;
> > > +    }
> > > +
> > > +    idx = s->file_idx++;
> > > +    filename = virtio_pstore_from_filename(s, s->files[idx]->d_name,
> > > +                                           &rarg->info);
> > > +    if (filename == NULL) {
> > > +        goto out;
> > > +    }
> > > +
> > > +    fd = open(filename, O_RDONLY);
> > > +    if (fd < 0) {
> > > +        error_report("cannot open %s", filename);
> > > +        goto out;
> > > +    }
> > 
> > I see open here but close nowhere. Does this leak fds?
> 
> I guess so.  But this is changed to use qio_channel_file API in v5 and
> I hope doing it right.
> 
> > 
> > > +
> > > +    if (fstat(fd, &stbuf) < 0) {
> > 
> > So we can stat, but can we e.g. read?
> 
> It's just being a paranoid, I think it should succeed, no?
> 
> > 
> > 
> > > +        goto out;
> > > +    }
> > > +
> > > +    rarg->vps            = s;
> > > +    rarg->elem           = elem;
> > > +    rarg->info.id        = cpu_to_le64(rarg->info.id);
> > > +    rarg->info.type      = cpu_to_le16(rarg->info.type);
> > > +    rarg->info.flags     = cpu_to_le32(rarg->info.flags);
> > > +    rarg->info.time_sec  = cpu_to_le64(stbuf.st_ctim.tv_sec);
> > 
> > Is this seconds since epoch?
> > Why ctim specifically?
> > Pls add comments.
> 
> I think it doesn't matter either ctim or mtim.
> 
> > 
> > > +    rarg->info.time_nsec = cpu_to_le32(stbuf.st_ctim.tv_nsec);
> > 
> > Not all hosts support nanosecond precision.
> > Do we need some way to tell guest what's reliable?
> 
> In fact I'm not sure how much it affects users.  The pstore messages
> are occasional and AFAIK pstore keeps it only for users' information.
> 
> > 
> > Unless you limit this to linux host, you should care about things
> > like this (in man fstat)
> > 
> >            Since  kernel 2.5.48, the stat structure supports nanosecond
> >     resolution for the three file timestamp fields.  The nanosecond compo‐
> >     nents of each timestamp are available via names of the form
> >     st_atim.tv_nsec if the _BSD_SOURCE or _SVID_SOURCE feature  test  macro
> >     is  defined.   Nanosecond  timestamps are nowadays standardized,
> >     starting with POSIX.1-2008, and, starting with version 2.12, glibc also
> >     exposes the nanosecond component names if _POSIX_C_SOURCE is defined
> >     with the value 200809L or greater,  or  _XOPEN_SOURCE  is defined  with
> >     the  value 700 or greater.  If none of the aforementioned macros are
> >     defined, then the nanosecond values are exposed with names of the form
> >     st_atimensec.
> 
> Thanks for the info.
> 
> > 
> > 
> > 
> > 
> > > +
> > > +    rarg->ioc = qio_channel_new_fd(fd, &err);
> > > +    if (err) {
> > > +        error_reportf_err(err, "cannot create io channel: ");
> > > +        goto out;
> > > +    }
> > > +
> > > +    qio_channel_set_blocking(rarg->ioc, false, &err);
> > > +    qio_channel_add_watch(rarg->ioc, G_IO_IN, pstore_async_read_fn, rarg,
> > > +                          free_rarg_fn);
> > > +    g_free(filename);
> > > +    return 1;
> > > +
> > > +out:
> > > +    g_free(filename);
> > > +    g_free(rarg);
> > > +
> > > +    return ret;
> > > +}
> > > +
> > > +struct pstore_write_arg {
> > > +    VirtIOPstore *vps;
> > > +    VirtQueueElement *elem;
> > > +    struct virtio_pstore_req *req;
> > > +    QIOChannel *ioc;
> > > +};
> > > +
> > > +static gboolean pstore_async_write_fn(QIOChannel *ioc, GIOCondition condition,
> > > +                                      gpointer data)
> > > +{
> > > +    struct pstore_write_arg *warg = data;
> > > +    VirtIOPstore *vps = warg->vps;
> > > +    VirtQueueElement *elem = warg->elem;
> > > +    struct iovec *sg = elem->out_sg;
> > > +    unsigned int sg_num = elem->out_num;
> > > +    struct virtio_pstore_res res;
> > > +    Error *err = NULL;
> > > +    ssize_t len;
> > > +    int ret;
> > > +
> > > +    /* we already consumed the req */
> > > +    iov_discard_front(&sg, &sg_num, sizeof(*warg->req));
> > > +
> > > +    len = qio_channel_writev(warg->ioc, sg, sg_num, &err);
> > > +    if (len < 0) {
> > > +        ret = -1;
> > > +    } else {
> > > +        ret = 0;
> > > +    }
> > 
> > This can discard part of the data written.
> > Don't we care?
> 
> Doing partial write is better than failing out.  But if it's
> meaningful to add a retry loop, I'd like to do so.
> 
> > 
> > > +
> > > +    res.cmd  = cpu_to_le16(VIRTIO_PSTORE_CMD_WRITE);
> > > +    res.type = warg->req->type;
> > > +    res.ret  = cpu_to_le32(ret);
> > > +
> > > +    /* tell the result to guest */
> > > +    iov_from_buf(elem->in_sg, elem->in_num, 0, &res, sizeof(res));
> > > +
> > > +    virtqueue_push(vps->wvq, elem, sizeof(res));
> > > +    virtio_notify(VIRTIO_DEVICE(vps), vps->wvq);
> > > +
> > > +    return G_SOURCE_REMOVE;
> > > +}
> > > +
> > > +static void free_warg_fn(gpointer data)
> > > +{
> > > +    struct pstore_write_arg *warg = data;
> > > +
> > > +    qio_channel_close(warg->ioc, NULL);
> > > +
> > > +    g_free(warg->elem);
> > > +    g_free(warg);
> > > +}
> > > +
> > > +static ssize_t virtio_pstore_do_write(VirtIOPstore *s, VirtQueueElement *elem,
> > > +                                      struct virtio_pstore_req *req)
> > > +{
> > > +    unsigned short type = le16_to_cpu(req->type);
> > > +    char *filename = NULL;
> > > +    int fd;
> > > +    int flags = O_WRONLY | O_CREAT | O_TRUNC;
> > > +    struct pstore_write_arg *warg = NULL;
> > > +    Error *err = NULL;
> > > +    int ret = -1;
> > > +
> > > +    /* do not keep same type of files more than 'file-max' */
> > > +    rotate_pstore_file(s, type);
> > 
> > If you don't care about failures, should this function
> > return a value? How about reporting it to the user?
> 
> Did you mean when it failed to delete the oldest file (FYI it's not
> really 'rotate').  Hmm.. will add error check and report.
> 
> > 
> > 
> > > +
> > > +    filename = virtio_pstore_to_filename(s, req);
> > > +    if (filename == NULL) {
> > > +        return -1;
> > > +    }
> > 
> > this can't happen
> > 
> > > +
> > > +    warg = g_malloc(sizeof(*warg));
> > > +    if (warg == NULL) {
> > > +        goto out;
> > > +    }
> > > +
> > > +    fd = open(filename, flags, 0644);
> > > +    if (fd < 0) {
> > > +        error_report("cannot open %s", filename);
> > > +        ret = fd;
> > > +        goto out;
> > > +    }
> > > +
> > > +    warg->vps            = s;
> > > +    warg->elem           = elem;
> > > +    warg->req            = req;
> > > +
> > > +    warg->ioc = qio_channel_new_fd(fd, &err);
> > > +    if (err) {
> > > +        error_reportf_err(err, "cannot create io channel: ");
> > > +        goto out;
> > > +    }
> > > +
> > > +    qio_channel_set_blocking(warg->ioc, false, &err);
> > > +    qio_channel_add_watch(warg->ioc, G_IO_OUT, pstore_async_write_fn, warg,
> > > +                          free_warg_fn);
> > > +    g_free(filename);
> > > +    return 1;
> > > +
> > > +out:
> > > +    g_free(filename);
> > > +    g_free(warg);
> > > +    return ret;
> > > +}
> > > +
> > > +static void virtio_pstore_handle_io(VirtIODevice *vdev, VirtQueue *vq)
> > > +{
> > > +    VirtIOPstore *s = VIRTIO_PSTORE(vdev);
> > > +    VirtQueueElement *elem;
> > > +    struct virtio_pstore_req req;
> > > +    struct virtio_pstore_res res;
> > > +    ssize_t len = 0;
> > > +    int ret;
> > > +
> > > +    for (;;) {
> > > +        elem = virtqueue_pop(vq, sizeof(VirtQueueElement));
> > > +        if (!elem) {
> > > +            return;
> > > +        }
> > > +
> > > +        if (elem->out_num < 1 || elem->in_num < 1) {
> > > +            error_report("request or response buffer is missing");
> > > +            exit(1);
> > > +        }
> > > +
> > > +        if (elem->out_num > 2 || elem->in_num > 3) {
> > > +            error_report("invalid number of input/output buffer");
> > > +            exit(1);
> > > +        }
> > > +
> > > +        len = iov_to_buf(elem->out_sg, elem->out_num, 0, &req, sizeof(req));
> > > +        if (len != (ssize_t)sizeof(req)) {
> > > +            error_report("invalid request size: %ld", (long)len);
> > > +            exit(1);
> > > +        }
> > > +        res.cmd  = req.cmd;
> > > +        res.type = req.type;
> > > +
> > > +        switch (le16_to_cpu(req.cmd)) {
> > > +        case VIRTIO_PSTORE_CMD_OPEN:
> > > +            ret = virtio_pstore_do_open(s);
> > > +            break;
> > > +        case VIRTIO_PSTORE_CMD_CLOSE:
> > > +            ret = virtio_pstore_do_close(s);
> > > +            break;
> > > +        case VIRTIO_PSTORE_CMD_ERASE:
> > > +            ret = virtio_pstore_do_erase(s, &req);
> > > +            break;
> > > +        case VIRTIO_PSTORE_CMD_READ:
> > > +            ret = virtio_pstore_do_read(s, elem);
> > > +            if (ret == 1) {
> > > +                /* async channel io */
> > > +                continue;
> > > +            }
> > > +            break;
> > > +        case VIRTIO_PSTORE_CMD_WRITE:
> > > +            ret = virtio_pstore_do_write(s, elem, &req);
> > > +            if (ret == 1) {
> > > +                /* async channel io */
> > > +                continue;
> > > +            }
> > > +            break;
> > > +        default:
> > > +            ret = -1;
> > > +            break;
> > > +        }
> > > +
> > > +        res.ret = ret;
> > > +
> > > +        iov_from_buf(elem->in_sg, elem->in_num, 0, &res, sizeof(res));
> > > +        virtqueue_push(vq, elem, sizeof(res) + len);
> > > +
> > > +        virtio_notify(vdev, vq);
> > > +        g_free(elem);
> > > +
> > > +        if (ret < 0) {
> > > +            return;
> > 
> > what does this do?
> 
> If it failed on any processing, reports it to the kernel and stop
> processing later commands.  The kernel won't send same kind of command
> later.
> 
> > 
> > > +        }
> > > +    }
> > > +}
> > > +
> > > +static void virtio_pstore_device_realize(DeviceState *dev, Error **errp)
> > > +{
> > > +    VirtIODevice *vdev = VIRTIO_DEVICE(dev);
> > > +    VirtIOPstore *s = VIRTIO_PSTORE(dev);
> > > +
> > > +    virtio_init(vdev, "virtio-pstore", VIRTIO_ID_PSTORE,
> > > +                sizeof(struct virtio_pstore_config));
> > > +
> > > +    s->id = 1;
> > > +
> > > +    if (!s->bufsize)
> > > +        s->bufsize = PSTORE_DEFAULT_BUFSIZE;
> > > +    if (!s->file_max)
> > > +        s->file_max = PSTORE_DEFAULT_FILE_MAX;
> > > +
> > > +    s->rvq = virtio_add_queue(vdev, 128, virtio_pstore_handle_io);
> > > +    s->wvq = virtio_add_queue(vdev, 128, virtio_pstore_handle_io);
> > > +}
> > > +
> > > +static void virtio_pstore_device_unrealize(DeviceState *dev, Error **errp)
> > > +{
> > > +    VirtIODevice *vdev = VIRTIO_DEVICE(dev);
> > > +
> > > +    virtio_cleanup(vdev);
> > > +}
> > > +
> > > +static void virtio_pstore_get_config(VirtIODevice *vdev, uint8_t *config_data)
> > > +{
> > > +    VirtIOPstore *dev = VIRTIO_PSTORE(vdev);
> > > +    struct virtio_pstore_config config;
> > 
> > Add {} here - you want all fields initialized
> > if you add them, to avoid leaking them to guest.
> 
> Ok.
> 
> > 
> > > +
> > > +    config.bufsize = cpu_to_le32(dev->bufsize);
> > > +
> > > +    memcpy(config_data, &config, sizeof(struct virtio_pstore_config));
> > > +}
> > > +
> > > +static void virtio_pstore_set_config(VirtIODevice *vdev,
> > > +                                     const uint8_t *config_data)
> > > +{
> > > +    VirtIOPstore *dev = VIRTIO_PSTORE(vdev);
> > > +    struct virtio_pstore_config config;
> > > +
> > > +    memcpy(&config, config_data, sizeof(struct virtio_pstore_config));
> > > +
> > > +    dev->bufsize = le32_to_cpu(config.bufsize);
> > > +}
> > > +
> > > +static uint64_t get_features(VirtIODevice *vdev, uint64_t f, Error **errp)
> > > +{
> > > +    return f;
> > > +}
> > > +
> > > +static void pstore_get_directory(Object *obj, Visitor *v,
> > > +                                 const char *name, void *opaque,
> > > +                                 Error **errp)
> > > +{
> > > +    VirtIOPstore *s = opaque;
> > > +
> > > +    visit_type_str(v, name, &s->directory, errp);
> > > +}
> > > +
> > > +static void pstore_set_directory(Object *obj, Visitor *v,
> > > +                                 const char *name, void *opaque,
> > > +                                 Error **errp)
> > > +{
> > > +    VirtIOPstore *s = opaque;
> > > +    Error *local_err = NULL;
> > > +    char *value;
> > > +
> > > +    visit_type_str(v, name, &value, &local_err);
> > > +    if (local_err) {
> > > +        error_propagate(errp, local_err);
> > > +        return;
> > > +    }
> > > +
> > > +    g_free(s->directory);
> > > +    s->directory = value;
> > > +}
> > > +
> > > +static void pstore_release_directory(Object *obj, const char *name,
> > > +                                     void *opaque)
> > > +{
> > > +    VirtIOPstore *s = opaque;
> > > +
> > > +    g_free(s->directory);
> > > +    s->directory = NULL;
> > > +}
> > > +
> > > +static void pstore_get_bufsize(Object *obj, Visitor *v,
> > > +                               const char *name, void *opaque,
> > > +                               Error **errp)
> > > +{
> > > +    VirtIOPstore *s = opaque;
> > > +    uint64_t value = s->bufsize;
> > > +
> > > +    visit_type_size(v, name, &value, errp);
> > > +}
> > > +
> > > +static void pstore_set_bufsize(Object *obj, Visitor *v,
> > > +                               const char *name, void *opaque,
> > > +                               Error **errp)
> > > +{
> > > +    VirtIOPstore *s = opaque;
> > > +    Error *error = NULL;
> > > +    uint64_t value;
> > > +
> > > +    visit_type_size(v, name, &value, &error);
> > > +    if (error) {
> > > +        error_propagate(errp, error);
> > > +        return;
> > > +    }
> > > +
> > > +    if (value < 4096) {
> > > +        error_setg(&error, "Warning: too small buffer size: %"PRIu64, value);
> > > +        error_propagate(errp, error);
> > > +        return;
> > > +    }
> > > +
> > > +    s->bufsize = value;
> > > +}
> > > +
> > > +static void pstore_get_file_max(Object *obj, Visitor *v,
> > > +                                const char *name, void *opaque,
> > > +                                Error **errp)
> > > +{
> > > +    VirtIOPstore *s = opaque;
> > > +    int64_t value = s->file_max;
> > > +
> > > +    visit_type_int(v, name, &value, errp);
> > > +}
> > > +
> > > +static void pstore_set_file_max(Object *obj, Visitor *v,
> > > +                                const char *name, void *opaque,
> > > +                                Error **errp)
> > > +{
> > > +    VirtIOPstore *s = opaque;
> > > +    Error *error = NULL;
> > > +    int64_t value;
> > > +
> > > +    visit_type_int(v, name, &value, &error);
> > > +    if (error) {
> > > +        error_propagate(errp, error);
> > > +        return;
> > > +    }
> > > +
> > > +    s->file_max = value;
> > > +}
> > 
> > Do you need dynamic properties? There are easier ways
> > to define an int property. Same for others.
> 
> It was due to my insufficient knowledge about the qemu code base.  I
> don't think it needs to be dynamic.
> 
> Thanks,
> Namhyung
> 
> > 
> > > +
> > > +static Property virtio_pstore_properties[] = {
> > > +    DEFINE_PROP_END_OF_LIST(),
> > > +};
> > > +
> > > +static void virtio_pstore_instance_init(Object *obj)
> > > +{
> > > +    VirtIOPstore *s = VIRTIO_PSTORE(obj);
> > > +
> > > +    object_property_add(obj, "directory", "str",
> > > +                        pstore_get_directory, pstore_set_directory,
> > > +                        pstore_release_directory, s, NULL);
> > > +    object_property_add(obj, "bufsize", "size",
> > > +                        pstore_get_bufsize, pstore_set_bufsize, NULL, s, NULL);
> > > +    object_property_add(obj, "file-max", "int",
> > > +                        pstore_get_file_max, pstore_set_file_max, NULL, s, NULL);
> > > +}
> > > +
> > > +static void virtio_pstore_class_init(ObjectClass *klass, void *data)
> > > +{
> > > +    DeviceClass *dc = DEVICE_CLASS(klass);
> > > +    VirtioDeviceClass *vdc = VIRTIO_DEVICE_CLASS(klass);
> > > +
> > > +    dc->props = virtio_pstore_properties;
> > > +    set_bit(DEVICE_CATEGORY_MISC, dc->categories);
> > > +    vdc->realize = virtio_pstore_device_realize;
> > > +    vdc->unrealize = virtio_pstore_device_unrealize;
> > > +    vdc->get_config = virtio_pstore_get_config;
> > > +    vdc->set_config = virtio_pstore_set_config;
> > > +    vdc->get_features = get_features;
> > > +}
> > > +
> > > +static const TypeInfo virtio_pstore_info = {
> > > +    .name = TYPE_VIRTIO_PSTORE,
> > > +    .parent = TYPE_VIRTIO_DEVICE,
> > > +    .instance_size = sizeof(VirtIOPstore),
> > > +    .instance_init = virtio_pstore_instance_init,
> > > +    .class_init = virtio_pstore_class_init,
> > > +};
> > > +
> > > +static void virtio_register_types(void)
> > > +{
> > > +    type_register_static(&virtio_pstore_info);
> > > +}
> > > +
> > > +type_init(virtio_register_types)
> > > diff --git a/include/hw/pci/pci.h b/include/hw/pci/pci.h
> > > index 929ec2f..b31774a 100644
> > > --- a/include/hw/pci/pci.h
> > > +++ b/include/hw/pci/pci.h
> > > @@ -79,6 +79,7 @@
> > >  #define PCI_DEVICE_ID_VIRTIO_SCSI        0x1004
> > >  #define PCI_DEVICE_ID_VIRTIO_RNG         0x1005
> > >  #define PCI_DEVICE_ID_VIRTIO_9P          0x1009
> > > +#define PCI_DEVICE_ID_VIRTIO_PSTORE      0x100a
> > >  
> > >  #define PCI_VENDOR_ID_REDHAT             0x1b36
> > >  #define PCI_DEVICE_ID_REDHAT_BRIDGE      0x0001
> > > diff --git a/include/hw/virtio/virtio-pstore.h b/include/hw/virtio/virtio-pstore.h
> > > new file mode 100644
> > > index 0000000..85b1828
> > > --- /dev/null
> > > +++ b/include/hw/virtio/virtio-pstore.h
> > > @@ -0,0 +1,36 @@
> > > +/*
> > > + * Virtio Pstore Support
> > > + *
> > > + * Authors:
> > > + *  Namhyung Kim      <namhyung@xxxxxxxxx>
> > > + *
> > > + * This work is licensed under the terms of the GNU GPL, version 2.  See
> > > + * the COPYING file in the top-level directory.
> > > + *
> > > + */
> > > +
> > > +#ifndef _QEMU_VIRTIO_PSTORE_H
> > > +#define _QEMU_VIRTIO_PSTORE_H
> > > +
> > > +#include "standard-headers/linux/virtio_pstore.h"
> > > +#include "hw/virtio/virtio.h"
> > > +#include "hw/pci/pci.h"
> > > +
> > > +#define TYPE_VIRTIO_PSTORE "virtio-pstore-device"
> > > +#define VIRTIO_PSTORE(obj) \
> > > +        OBJECT_CHECK(VirtIOPstore, (obj), TYPE_VIRTIO_PSTORE)
> > > +
> > > +typedef struct VirtIOPstore {
> > > +    VirtIODevice    parent_obj;
> > > +    VirtQueue      *rvq;
> > > +    VirtQueue      *wvq;
> > > +    char           *directory;
> > > +    int             file_idx;
> > > +    int             num_file;
> > > +    struct dirent **files;
> > > +    uint64_t        id;
> > > +    uint64_t        bufsize;
> > > +    uint64_t        file_max;
> > > +} VirtIOPstore;
> > > +
> > > +#endif
> > > diff --git a/include/standard-headers/linux/virtio_ids.h b/include/standard-headers/linux/virtio_ids.h
> > > index 77925f5..c72a9ab 100644
> > > --- a/include/standard-headers/linux/virtio_ids.h
> > > +++ b/include/standard-headers/linux/virtio_ids.h
> > > @@ -41,5 +41,6 @@
> > >  #define VIRTIO_ID_CAIF	       12 /* Virtio caif */
> > >  #define VIRTIO_ID_GPU          16 /* virtio GPU */
> > >  #define VIRTIO_ID_INPUT        18 /* virtio input */
> > > +#define VIRTIO_ID_PSTORE       22 /* virtio pstore */
> > >  
> > >  #endif /* _LINUX_VIRTIO_IDS_H */
> > > diff --git a/include/standard-headers/linux/virtio_pstore.h b/include/standard-headers/linux/virtio_pstore.h
> > > new file mode 100644
> > > index 0000000..2f91839
> > > --- /dev/null
> > > +++ b/include/standard-headers/linux/virtio_pstore.h
> > > @@ -0,0 +1,76 @@
> > > +#ifndef _LINUX_VIRTIO_PSTORE_H
> > > +#define _LINUX_VIRTIO_PSTORE_H
> > > +/* This header is BSD licensed so anyone can use the definitions to implement
> > > + * compatible drivers/servers.
> > > + *
> > > + * Redistribution and use in source and binary forms, with or without
> > > + * modification, are permitted provided that the following conditions
> > > + * are met:
> > > + * 1. Redistributions of source code must retain the above copyright
> > > + *    notice, this list of conditions and the following disclaimer.
> > > + * 2. Redistributions in binary form must reproduce the above copyright
> > > + *    notice, this list of conditions and the following disclaimer in the
> > > + *    documentation and/or other materials provided with the distribution.
> > > + * 3. Neither the name of IBM nor the names of its contributors
> > > + *    may be used to endorse or promote products derived from this software
> > > + *    without specific prior written permission.
> > > + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
> > > + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
> > > + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
> > > + * ARE DISCLAIMED.  IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
> > > + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
> > > + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
> > > + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
> > > + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
> > > + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
> > > + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
> > > + * SUCH DAMAGE. */
> > > +#include "standard-headers/linux/types.h"
> > > +#include "standard-headers/linux/virtio_types.h"
> > > +#include "standard-headers/linux/virtio_ids.h"
> > > +#include "standard-headers/linux/virtio_config.h"
> > > +
> > > +#define VIRTIO_PSTORE_CMD_NULL   0
> > > +#define VIRTIO_PSTORE_CMD_OPEN   1
> > > +#define VIRTIO_PSTORE_CMD_READ   2
> > > +#define VIRTIO_PSTORE_CMD_WRITE  3
> > > +#define VIRTIO_PSTORE_CMD_ERASE  4
> > > +#define VIRTIO_PSTORE_CMD_CLOSE  5
> > > +
> > > +#define VIRTIO_PSTORE_TYPE_UNKNOWN  0
> > > +#define VIRTIO_PSTORE_TYPE_DMESG    1
> > > +
> > > +#define VIRTIO_PSTORE_FL_COMPRESSED  1
> > > +
> > > +struct virtio_pstore_req {
> > > +    __virtio16 cmd;
> > > +    __virtio16 type;
> > > +    __virtio32 flags;
> > > +    __virtio64 id;
> > > +    __virtio32 count;
> > > +    __virtio32 reserved;
> > > +};
> > > +
> > > +struct virtio_pstore_res {
> > > +    __virtio16 cmd;
> > > +    __virtio16 type;
> > > +    __virtio32 ret;
> > > +};
> > > +
> > > +struct virtio_pstore_fileinfo {
> > > +    __virtio64 id;
> > > +    __virtio32 count;
> > > +    __virtio16 type;
> > > +    __virtio16 unused;
> > > +    __virtio32 flags;
> > > +    __virtio32 len;
> > > +    __virtio64 time_sec;
> > > +    __virtio32 time_nsec;
> > > +    __virtio32 reserved;
> > > +};
> > > +
> > > +struct virtio_pstore_config {
> > > +    __virtio32 bufsize;
> > > +};
> > > +
> > > +#endif /* _LINUX_VIRTIO_PSTORE_H */
> > > diff --git a/qdev-monitor.c b/qdev-monitor.c
> > > index e19617f..e1df5a9 100644
> > > --- a/qdev-monitor.c
> > > +++ b/qdev-monitor.c
> > > @@ -73,6 +73,7 @@ static const QDevAlias qdev_alias_table[] = {
> > >      { "virtio-serial-pci", "virtio-serial", QEMU_ARCH_ALL & ~QEMU_ARCH_S390X },
> > >      { "virtio-tablet-ccw", "virtio-tablet", QEMU_ARCH_S390X },
> > >      { "virtio-tablet-pci", "virtio-tablet", QEMU_ARCH_ALL & ~QEMU_ARCH_S390X },
> > > +    { "virtio-pstore-pci", "virtio-pstore" },
> > >      { }
> > >  };
> > >  
> > > -- 
> > > 2.9.3
_______________________________________________
Virtualization mailing list
Virtualization@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linuxfoundation.org/mailman/listinfo/virtualization





[Index of Archives]     [KVM Development]     [Libvirt Development]     [Libvirt Users]     [CentOS Virtualization]     [Netdev]     [Ethernet Bridging]     [Linux Wireless]     [Kernel Newbies]     [Security]     [Linux for Hams]     [Netfilter]     [Bugtraq]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux Admin]     [Samba]

  Powered by Linux