The spec says: after writing 0 to device_status, the driver MUST wait for a read of device_status to return 0 before reinitializing the device. Cc: stable@xxxxxxxxxxxxxxx Signed-off-by: Michael S. Tsirkin <mst@xxxxxxxxxx> --- drivers/virtio/virtio_pci_modern.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/virtio/virtio_pci_modern.c b/drivers/virtio/virtio_pci_modern.c index f6f28cc..e76bd91 100644 --- a/drivers/virtio/virtio_pci_modern.c +++ b/drivers/virtio/virtio_pci_modern.c @@ -17,6 +17,7 @@ * */ +#include <linux/delay.h> #define VIRTIO_PCI_NO_LEGACY #include "virtio_pci_common.h" @@ -271,9 +272,13 @@ static void vp_reset(struct virtio_device *vdev) struct virtio_pci_device *vp_dev = to_vp_device(vdev); /* 0 status means a reset. */ vp_iowrite8(0, &vp_dev->common->device_status); - /* Flush out the status write, and flush in device writes, - * including MSI-X interrupts, if any. */ - vp_ioread8(&vp_dev->common->device_status); + /* After writing 0 to device_status, the driver MUST wait for a read of + * device_status to return 0 before reinitializing the device. + * This will flush out the status write, and flush in device writes, + * including MSI-X interrupts, if any. + */ + while (vp_ioread8(&vp_dev->common->device_status)) + msleep(1); /* Flush pending VQ/configuration callbacks. */ vp_synchronize_vectors(vdev); } -- MST _______________________________________________ Virtualization mailing list Virtualization@xxxxxxxxxxxxxxxxxxxxxxxxxx https://lists.linuxfoundation.org/mailman/listinfo/virtualization
