From: Nikolay Aleksandrov <nikolay@xxxxxxxxxxxxxxxxxxx>
This patch allows the user to set and retrieve speed and duplex of the
virtio_net device via ethtool. Having this functionality is very helpful
for simulating different environments and also enables the virtio_net
device to participate in operations where proper speed and duplex are
required (e.g. currently bonding lacp mode requires full duplex). Custom
speed and duplex are not allowed, the user-supplied settings are validated
before applying. Only full and unknown duplex are allowed to be set.
Example:
$ ethtool eth1
Settings for eth1:
...
Speed: Unknown!
Duplex: Unknown! (255)
$ ethtool -s eth1 speed 1000 duplex full
$ ethtool eth1
Settings for eth1:
...
Speed: 1000Mb/s
Duplex: Full
Based on a patch by Roopa Prabhu.
CC: Roopa Prabhu <roopa@xxxxxxxxxxxxxxxxxxx>
CC: Michael S. Tsirkin <mst@xxxxxxxxxx>
CC: virtualization@xxxxxxxxxxxxxxxxxxxxxxxxxx
Signed-off-by: Nikolay Aleksandrov <nikolay@xxxxxxxxxxxxxxxxxxx>
---
Allowed to set unknown speed/duplex if the user wants to reset them, though
the user-space ethtool tool currently doesn't allow setting them.
drivers/net/virtio_net.c | 74 ++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 74 insertions(+)
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index 767ab11a6e9f..722ade567ee5 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -146,6 +146,10 @@ struct virtnet_info {
virtio_net_ctrl_ack ctrl_status;
u8 ctrl_promisc;
u8 ctrl_allmulti;
+
+ /* Ethtool settings */
+ u8 duplex;
+ u32 speed;
};
struct padded_vnet_hdr {
@@ -1376,6 +1380,72 @@ static void virtnet_get_channels(struct net_device *dev,
channels->other_count = 0;
}
+static bool virtnet_validate_speed(u32 speed)
+{
+ switch (speed) {
+ case SPEED_10:
+ case SPEED_100:
+ case SPEED_1000:
+ case SPEED_2500:
+ case SPEED_5000:
+ case SPEED_10000:
+ case SPEED_20000:
+ case SPEED_25000:
+ case SPEED_40000:
+ case SPEED_50000:
+ case SPEED_56000:
+ case SPEED_100000:
+ case SPEED_UNKNOWN:
+ return true;
+ }
+
+ return false;
+}
+
+static bool virtnet_validate_duplex(u8 duplex)
+{
+ switch (duplex) {
+ case DUPLEX_FULL:
+ case DUPLEX_UNKNOWN:
+ return true;
+ }
+
+ return false;
+}
+
+static int virtnet_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct virtnet_info *vi = netdev_priv(dev);
+ u32 speed = ethtool_cmd_speed(cmd);
+
+ /* don't allow custom speed and duplex */
+ if (!virtnet_validate_speed(speed) ||
+ !virtnet_validate_duplex(cmd->duplex))
+ return -EINVAL;
+ vi->speed = speed;
+ vi->duplex = cmd->duplex;
+
+ return 0;
+}
+
+static int virtnet_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct virtnet_info *vi = netdev_priv(dev);
+
+ ethtool_cmd_speed_set(cmd, vi->speed);
+ cmd->duplex = vi->duplex;
+
+ return 0;
+}
+
+static void virtnet_init_settings(struct net_device *dev)
+{
+ struct virtnet_info *vi = netdev_priv(dev);
+
+ vi->speed = SPEED_UNKNOWN;
+ vi->duplex = DUPLEX_UNKNOWN;
+}
+
static const struct ethtool_ops virtnet_ethtool_ops = {
.get_drvinfo = virtnet_get_drvinfo,
.get_link = ethtool_op_get_link,
@@ -1383,6 +1453,8 @@ static const struct ethtool_ops virtnet_ethtool_ops = {
.set_channels = virtnet_set_channels,
.get_channels = virtnet_get_channels,
.get_ts_info = ethtool_op_get_ts_info,
+ .get_settings = virtnet_get_settings,
+ .set_settings = virtnet_set_settings,
};
#define MIN_MTU 68
@@ -1855,6 +1927,8 @@ static int virtnet_probe(struct virtio_device *vdev)
netif_set_real_num_tx_queues(dev, vi->curr_queue_pairs);
netif_set_real_num_rx_queues(dev, vi->curr_queue_pairs);
+ virtnet_init_settings(dev);
+
err = register_netdev(dev);
if (err) {
pr_debug("virtio_net: registering device failed\n");
--
2.4.3
_______________________________________________
Virtualization mailing list
Virtualization@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
