Re: [PATCH v7] pci: quirk to skip msi disable on shutdown

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, Sep 06, 2015 at 06:32:35PM +0300, Michael S. Tsirkin wrote:
> On some hypervisors, virtio devices tend to generate spurious interrupts
> when switching between MSI and non-MSI mode.  Normally, either MSI or
> non-MSI is used and all is well, but during shutdown, linux disables MSI
> which then causes an "irq %d: nobody cared" message, with irq being
> subsequently disabled.
> 
> Since bus mastering is already disabled at this point, disabling MSI
> isn't actually useful for spec compliant devices: MSI interrupts are
> in-bus memory writes so disabling Bus Master (which is already done)
> disables these as well: after some research, it appears to be there for
> the benefit of devices that ignore the bus master bit.
> 
> As it's not clear how common this kind of bug is, this patch simply adds
> a quirk, to be set by devices that wish to skip disabling msi on
> shutdown, relying on bus master instead.
> 
> We set this quirk in virtio core.
> 
> Reported-by: Fam Zheng <famz@xxxxxxxxxx>
> Cc: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
> Cc: Yinghai Lu <yhlu.kernel.send@xxxxxxxxx>
> Cc: Ulrich Obergfell <uobergfe@xxxxxxxxxx>
> Cc: Rusty Russell <rusty@xxxxxxxxxxxxxxx>
> Cc: "Eric W. Biederman" <ebiederm@xxxxxxxxxxxx>
> Signed-off-by: Michael S. Tsirkin <mst@xxxxxxxxxx>

Eric, what do you think of this?  You had many comments on previous
versions.

Minor comment on a comment below.

> ---
> 
> 
> changes from v6:
> 	limit changes to virtio only
> changes from v5:
>         rebased on top of pci/msi
>         fixed commit log, including comments by Bjorn
>         and adding explanation to address comments/questions by Eric
>         dropped stable Cc, this patch does not seem to qualify for stable
> changes from v4:
>         Yijing Wang <wangyijing@xxxxxxxxxx> noted that
>         early fixups rely on pci_msi_off.
>         Split out the functionality and move off the
>         required part to run early during pci_device_setup.
> Changes from v3:
>         fix a copy-and-paste error in
>           pci: drop some duplicate code
>         other patches are unchanged
>         drop Cc stable for now
> Changes from v2:
>         move code from probe to device enumeration
>         add patches to unexport pci_msi_off
> 
> 
>  include/linux/pci.h                | 2 ++
>  drivers/pci/pci-driver.c           | 6 ++++--
>  drivers/virtio/virtio_pci_common.c | 4 ++++
>  3 files changed, 10 insertions(+), 2 deletions(-)
> 
> diff --git a/include/linux/pci.h b/include/linux/pci.h
> index 860c751..80f3494 100644
> --- a/include/linux/pci.h
> +++ b/include/linux/pci.h
> @@ -180,6 +180,8 @@ enum pci_dev_flags {
>  	PCI_DEV_FLAGS_NO_BUS_RESET = (__force pci_dev_flags_t) (1 << 6),
>  	/* Do not use PM reset even if device advertises NoSoftRst- */
>  	PCI_DEV_FLAGS_NO_PM_RESET = (__force pci_dev_flags_t) (1 << 7),
> +	/* Do not disable MSI on shutdown, disable bus master instead */

This comment doesn't really match what the patch does.  The patch merely
does "Do not disable MSI on shutdown."  It doesn't "disable bus master
instead."

Bus master may be disabled elsewhere, but that is independent of the
PCI_DEV_FLAGS_NO_MSI_SHUTDOWN flag.

> +	PCI_DEV_FLAGS_NO_MSI_SHUTDOWN = (__force pci_dev_flags_t) (1 << 8),
>  };
>  
>  enum pci_irq_reroute_variant {
> diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
> index 3cb2210..59d9e40 100644
> --- a/drivers/pci/pci-driver.c
> +++ b/drivers/pci/pci-driver.c
> @@ -450,8 +450,10 @@ static void pci_device_shutdown(struct device *dev)
>  
>  	if (drv && drv->shutdown)
>  		drv->shutdown(pci_dev);
> -	pci_msi_shutdown(pci_dev);
> -	pci_msix_shutdown(pci_dev);
> +	if (!(pci_dev->dev_flags & PCI_DEV_FLAGS_NO_MSI_SHUTDOWN)) {
> +		pci_msi_shutdown(pci_dev);
> +		pci_msix_shutdown(pci_dev);
> +	}
>  
>  #ifdef CONFIG_KEXEC
>  	/*
> diff --git a/drivers/virtio/virtio_pci_common.c b/drivers/virtio/virtio_pci_common.c
> index 78f804a..26f46c3 100644
> --- a/drivers/virtio/virtio_pci_common.c
> +++ b/drivers/virtio/virtio_pci_common.c
> @@ -528,6 +528,8 @@ static int virtio_pci_probe(struct pci_dev *pci_dev,
>  	if (rc)
>  		goto err_register;
>  
> +	pci_dev->dev_flags |= PCI_DEV_FLAGS_NO_MSI_SHUTDOWN;
> +
>  	return 0;
>  
>  err_register:
> @@ -546,6 +548,8 @@ static void virtio_pci_remove(struct pci_dev *pci_dev)
>  {
>  	struct virtio_pci_device *vp_dev = pci_get_drvdata(pci_dev);
>  
> +	pci_dev->dev_flags &= ~PCI_DEV_FLAGS_NO_MSI_SHUTDOWN;
> +
>  	unregister_virtio_device(&vp_dev->vdev);
>  
>  	if (vp_dev->ioaddr)
> -- 
> MST
_______________________________________________
Virtualization mailing list
Virtualization@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linuxfoundation.org/mailman/listinfo/virtualization



[Index of Archives]     [KVM Development]     [Libvirt Development]     [Libvirt Users]     [CentOS Virtualization]     [Netdev]     [Ethernet Bridging]     [Linux Wireless]     [Kernel Newbies]     [Security]     [Linux for Hams]     [Netfilter]     [Bugtraq]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux Admin]     [Samba]

  Powered by Linux