On restore, virtio pci does the following:
+ set features
+ init vqs etc - device can be used at this point!
+ set ACKNOWLEDGE,DRIVER and DRIVER_OK status bits
This is in violation of the virtio spec, which
requires the following order:
- ACKNOWLEDGE
- DRIVER
- init vqs
- DRIVER_OK
Cc: stable@xxxxxxxxxxxxxxx
Cc: Amit Shah <amit.shah@xxxxxxxxxx>
Signed-off-by: Michael S. Tsirkin <mst@xxxxxxxxxx>
---
Lightly tested.
Will repost as non-RFC once testing is done, sending
out now for early flames/comments.
Thanks!
drivers/virtio/virtio_pci.c | 36 ++++++++++++++++++++++++++++++++----
1 file changed, 32 insertions(+), 4 deletions(-)
diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c
index 58f7e45..58cbf6e 100644
--- a/drivers/virtio/virtio_pci.c
+++ b/drivers/virtio/virtio_pci.c
@@ -785,6 +785,7 @@ static int virtio_pci_restore(struct device *dev)
struct pci_dev *pci_dev = to_pci_dev(dev);
struct virtio_pci_device *vp_dev = pci_get_drvdata(pci_dev);
struct virtio_driver *drv;
+ unsigned status = 0;
int ret;
drv = container_of(vp_dev->vdev.dev.driver,
@@ -795,14 +796,41 @@ static int virtio_pci_restore(struct device *dev)
return ret;
pci_set_master(pci_dev);
+ /* We always start by resetting the device, in case a previous
+ * driver messed it up. */
+ vp_reset(&vp_dev->vdev);
+
+ /* Acknowledge that we've seen the device. */
+ status |= VIRTIO_CONFIG_S_ACKNOWLEDGE;
+ vp_set_status(&vp_dev->vdev, status);
+
+ /* Maybe driver failed before freeze.
+ * Restore the failed status, for debugging. */
+ status |= vp_dev->saved_status & VIRTIO_CONFIG_S_FAILED;
+ vp_set_status(&vp_dev->vdev, status);
+
+ if (!drv)
+ return 0;
+
+ /* We have a driver! */
+ status |= VIRTIO_CONFIG_S_DRIVER;
+ vp_set_status(&vp_dev->vdev, status);
+
vp_finalize_features(&vp_dev->vdev);
- if (drv && drv->restore)
- ret = drv->restore(&vp_dev->vdev);
+ if (!drv->restore)
+ return 0;
+
+ ret = drv->restore(&vp_dev->vdev);
+ if (ret) {
+ status |= VIRTIO_CONFIG_S_FAILED;
+ vp_set_status(&vp_dev->vdev, status);
+ return ret;
+ }
/* Finally, tell the device we're all set */
- if (!ret)
- vp_set_status(&vp_dev->vdev, vp_dev->saved_status);
+ status |= VIRTIO_CONFIG_S_DRIVER_OK;
+ vp_set_status(&vp_dev->vdev, status);
return ret;
}
--
MST
_______________________________________________
Virtualization mailing list
Virtualization@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
