We used to have several callers which just used arrays. They're
gone, so we can use sg_next() everywhere, simplifying the code.
On my laptop, this slowed down vring_bench by 15%:
vring_bench before:
936153354-967745359(9.44739e+08+/-6.1e+06)ns
vring_bench after:
1061485790-1104800648(1.08254e+09+/-6.6e+06)ns
However, a more realistic test using pktgen on a AMD FX(tm)-8320 saw
a few percent improvement:
pktgen before:
767390-792966(785159+/-6.5e+03)pps 356-367(363.75+/-2.9)Mb/sec (356068960-367936224(3.64314e+08+/-3e+06)bps) errors: 0
pktgen after:
787781-796334(793165+/-2.4e+03)pps 365-369(367.5+/-1.2)Mb/sec (365530384-369498976(3.68028e+08+/-1.1e+06)bps) errors: 0
Signed-off-by: Rusty Russell <rusty@xxxxxxxxxxxxxxx>
---
drivers/virtio/virtio_ring.c | 68 +++++++++++++-------------------------------
1 file changed, 19 insertions(+), 49 deletions(-)
diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c
index 4d08f45a9c29..374399c62080 100644
--- a/drivers/virtio/virtio_ring.c
+++ b/drivers/virtio/virtio_ring.c
@@ -99,28 +99,10 @@ struct vring_virtqueue
#define to_vvq(_vq) container_of(_vq, struct vring_virtqueue, vq)
-static inline struct scatterlist *sg_next_chained(struct scatterlist *sg,
- unsigned int *count)
-{
- return sg_next(sg);
-}
-
-static inline struct scatterlist *sg_next_arr(struct scatterlist *sg,
- unsigned int *count)
-{
- if (--(*count) == 0)
- return NULL;
- return sg + 1;
-}
-
/* Set up an indirect table of descriptors and add it to the queue. */
static inline int vring_add_indirect(struct vring_virtqueue *vq,
struct scatterlist *sgs[],
- struct scatterlist *(*next)
- (struct scatterlist *, unsigned int *),
unsigned int total_sg,
- unsigned int total_out,
- unsigned int total_in,
unsigned int out_sgs,
unsigned int in_sgs,
gfp_t gfp)
@@ -144,7 +126,7 @@ static inline int vring_add_indirect(struct vring_virtqueue *vq,
/* Transfer entries from the sg lists into the indirect page */
i = 0;
for (n = 0; n < out_sgs; n++) {
- for (sg = sgs[n]; sg; sg = next(sg, &total_out)) {
+ for (sg = sgs[n]; sg; sg = sg_next(sg)) {
desc[i].flags = VRING_DESC_F_NEXT;
desc[i].addr = sg_phys(sg);
desc[i].len = sg->length;
@@ -153,7 +135,7 @@ static inline int vring_add_indirect(struct vring_virtqueue *vq,
}
}
for (; n < (out_sgs + in_sgs); n++) {
- for (sg = sgs[n]; sg; sg = next(sg, &total_in)) {
+ for (sg = sgs[n]; sg; sg = sg_next(sg)) {
desc[i].flags = VRING_DESC_F_NEXT|VRING_DESC_F_WRITE;
desc[i].addr = sg_phys(sg);
desc[i].len = sg->length;
@@ -186,10 +168,7 @@ static inline int vring_add_indirect(struct vring_virtqueue *vq,
static inline int virtqueue_add(struct virtqueue *_vq,
struct scatterlist *sgs[],
- struct scatterlist *(*next)
- (struct scatterlist *, unsigned int *),
- unsigned int total_out,
- unsigned int total_in,
+ unsigned int total_sg,
unsigned int out_sgs,
unsigned int in_sgs,
void *data,
@@ -197,7 +176,7 @@ static inline int virtqueue_add(struct virtqueue *_vq,
{
struct vring_virtqueue *vq = to_vvq(_vq);
struct scatterlist *sg;
- unsigned int i, n, avail, uninitialized_var(prev), total_sg;
+ unsigned int i, n, avail, uninitialized_var(prev);
int head;
START_USE(vq);
@@ -222,13 +201,10 @@ static inline int virtqueue_add(struct virtqueue *_vq,
}
#endif
- total_sg = total_in + total_out;
-
/* If the host supports indirect descriptor tables, and we have multiple
* buffers, then go indirect. FIXME: tune this threshold */
if (vq->indirect && total_sg > 1 && vq->vq.num_free) {
- head = vring_add_indirect(vq, sgs, next, total_sg, total_out,
- total_in,
+ head = vring_add_indirect(vq, sgs, total_sg,
out_sgs, in_sgs, gfp);
if (likely(head >= 0))
goto add_head;
@@ -254,7 +230,7 @@ static inline int virtqueue_add(struct virtqueue *_vq,
head = i = vq->free_head;
for (n = 0; n < out_sgs; n++) {
- for (sg = sgs[n]; sg; sg = next(sg, &total_out)) {
+ for (sg = sgs[n]; sg; sg = sg_next(sg)) {
vq->vring.desc[i].flags = VRING_DESC_F_NEXT;
vq->vring.desc[i].addr = sg_phys(sg);
vq->vring.desc[i].len = sg->length;
@@ -263,7 +239,7 @@ static inline int virtqueue_add(struct virtqueue *_vq,
}
}
for (; n < (out_sgs + in_sgs); n++) {
- for (sg = sgs[n]; sg; sg = next(sg, &total_in)) {
+ for (sg = sgs[n]; sg; sg = sg_next(sg)) {
vq->vring.desc[i].flags = VRING_DESC_F_NEXT|VRING_DESC_F_WRITE;
vq->vring.desc[i].addr = sg_phys(sg);
vq->vring.desc[i].len = sg->length;
@@ -324,29 +300,23 @@ int virtqueue_add_sgs(struct virtqueue *_vq,
void *data,
gfp_t gfp)
{
- unsigned int i, total_out, total_in;
+ unsigned int i, total_sg = 0;
/* Count them first. */
- for (i = total_out = total_in = 0; i < out_sgs; i++) {
- struct scatterlist *sg;
- for (sg = sgs[i]; sg; sg = sg_next(sg))
- total_out++;
- }
- for (; i < out_sgs + in_sgs; i++) {
+ for (i = 0; i < out_sgs + in_sgs; i++) {
struct scatterlist *sg;
for (sg = sgs[i]; sg; sg = sg_next(sg))
- total_in++;
+ total_sg++;
}
- return virtqueue_add(_vq, sgs, sg_next_chained,
- total_out, total_in, out_sgs, in_sgs, data, gfp);
+ return virtqueue_add(_vq, sgs, total_sg, out_sgs, in_sgs, data, gfp);
}
EXPORT_SYMBOL_GPL(virtqueue_add_sgs);
/**
* virtqueue_add_outbuf - expose output buffers to other end
* @vq: the struct virtqueue we're talking about.
- * @sgs: array of scatterlists (need not be terminated!)
- * @num: the number of scatterlists readable by other side
+ * @sg: scatterlist (must be well-formed and terminated!)
+ * @num: the number of entries in @sg readable by other side
* @data: the token identifying the buffer.
* @gfp: how to do memory allocations (if necessary).
*
@@ -356,19 +326,19 @@ EXPORT_SYMBOL_GPL(virtqueue_add_sgs);
* Returns zero or a negative error (ie. ENOSPC, ENOMEM, EIO).
*/
int virtqueue_add_outbuf(struct virtqueue *vq,
- struct scatterlist sg[], unsigned int num,
+ struct scatterlist *sg, unsigned int num,
void *data,
gfp_t gfp)
{
- return virtqueue_add(vq, &sg, sg_next_arr, num, 0, 1, 0, data, gfp);
+ return virtqueue_add(vq, &sg, num, 1, 0, data, gfp);
}
EXPORT_SYMBOL_GPL(virtqueue_add_outbuf);
/**
* virtqueue_add_inbuf - expose input buffers to other end
* @vq: the struct virtqueue we're talking about.
- * @sgs: array of scatterlists (need not be terminated!)
- * @num: the number of scatterlists writable by other side
+ * @sg: scatterlist (must be well-formed and terminated!)
+ * @num: the number of entries in @sg writable by other side
* @data: the token identifying the buffer.
* @gfp: how to do memory allocations (if necessary).
*
@@ -378,11 +348,11 @@ EXPORT_SYMBOL_GPL(virtqueue_add_outbuf);
* Returns zero or a negative error (ie. ENOSPC, ENOMEM, EIO).
*/
int virtqueue_add_inbuf(struct virtqueue *vq,
- struct scatterlist sg[], unsigned int num,
+ struct scatterlist *sg, unsigned int num,
void *data,
gfp_t gfp)
{
- return virtqueue_add(vq, &sg, sg_next_arr, 0, num, 0, 1, data, gfp);
+ return virtqueue_add(vq, &sg, num, 0, 1, data, gfp);
}
EXPORT_SYMBOL_GPL(virtqueue_add_inbuf);
--
1.9.1
_______________________________________________
Virtualization mailing list
Virtualization@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
