On Sun, May 01, 2011 at 11:39:21AM -0400, Christoph Hellwig wrote: > On Fri, Apr 29, 2011 at 04:32:35PM +0000, KY Srinivasan wrote: > > On the host-side, as part of configuring a guest you can specify block devices > > as being under an IDE controller or under a > > SCSI controller. Those are the only options you have. Devices configured under > > the IDE controller cannot be seen in the guest under the emulated SCSI front-end which is > > the scsi driver (storvsc_drv). So, when you do a bus scan in the emulated scsi front-end, > > the devices enumerated will not include block devices configured under the IDE > > controller. So, it is not clear to me how I can do what you are proposing given the > > restrictions imposed by the host. > > Just because a device is not reported by REPORT_LUNS doesn't mean you > can't talk to it using a SCSI LLDD. We have SCSI transports with all > kinds of strange ways to discover devices. Using scsi_add_device you > can add LUNs found by your own discovery methods, and use all the > existing scsi command handling. Yeah, it seems to me that no matter how the user specifies the disk "type" for the guest configuration, we should use the same Linux driver, with the same naming scheme for both ways. As Christoph points out, it's just a matter of hooking the device up to the scsi subsystem. We do that today for ide, usb, scsi, and loads of other types of devices all with the common goal of making it easier for userspace to handle the devices in a standard manner. thanks, greg k-h _______________________________________________ Virtualization mailing list Virtualization@xxxxxxxxxxxxxxxxxxxxxxxxxx https://lists.linux-foundation.org/mailman/listinfo/virtualization
