Hi, this set of patches contains the initial implementation of the IEEE 802.1Qbg standard: code for the exchange of EVB TLVs in LLDP frames to negotiate VSI capabalities as well as VDP VSI TLVs between a host with virtual machines and an adjacent switch. It supports setting the parameters of the TLV exchange from the command line using lldptool. VDP profiles consisting of mode,mgrid,typeid,typeidversion,instanceid,mac,vlan can be given to lldpad with lldptool or sent to lldpad via netlink messages from the kernel or another program, e.g. libvirt. VDP profiles are processed through the VDP/VSI and ECP state machines and sent out in ECP frames. ACK frames are received and processed through ECP and VDP/VSI state machines. It implements a VDP bridge role for a port together with a lldptool command to switch a port to the bridge role. These patches apply against lldpad 0.9.38. Protocol debug messages are now logged to syslog via LLDPAD_* macros and no longer to console. If you want to see them, configure your syslog daemon to collect debug messages and start lldpad with -V 7. - improved cleanup in case of interface down - improved checking if a port really exists - converted all our code to use LLDPAD_ log messages - addressed Johns comments - modified EVB TLV defaults - increase max number of VSIs to 64k - fixed a number of bugs and memleaks For more information about lldpad take a look at http://sourceforge.net/projects/e1000/files/DCB%20Tools/lldpad/ Please review and comment. Thank you ! Jens _______________________________________________ Virtualization mailing list Virtualization@xxxxxxxxxxxxxxxxxxxxxxxxxx https://lists.linux-foundation.org/mailman/listinfo/virtualization