From: Greg Kroah-Hartman <gregkh@xxxxxxx>
After LogMsg was converted to printk, lots of build warnings showed up
as no one was checking the arguments to LogMsg. This patch fixes them
all.
Cc: Hank Janssen <hjanssen@xxxxxxxxxxxxx>
Cc: Haiyang Zhang <haiyangz@xxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>
---
drivers/staging/hv/Hv.c | 6 +++---
drivers/staging/hv/StorVsc.c | 16 ++++++++--------
drivers/staging/hv/blkvsc_drv.c | 12 ++++++------
drivers/staging/hv/storvsc_drv.c | 2 +-
4 files changed, 18 insertions(+), 18 deletions(-)
--- a/drivers/staging/hv/blkvsc_drv.c
+++ b/drivers/staging/hv/blkvsc_drv.c
@@ -918,7 +918,7 @@ static int blkvsc_submit_request(struct
STORVSC_REQUEST *storvsc_req;
- DPRINT_DBG(BLKVSC_DRV, "blkvsc_submit_request() - req %p type %s start_sector %llu count %d offset %d len %d\n",
+ DPRINT_DBG(BLKVSC_DRV, "blkvsc_submit_request() - req %p type %s start_sector %llu count %ld offset %d len %d\n",
blkvsc_req,
(blkvsc_req->write)?"WRITE":"READ",
blkvsc_req->sector_start,
@@ -1087,7 +1087,7 @@ static int blkvsc_do_request(struct bloc
{
if (pending)
{
- DPRINT_DBG(BLKVSC_DRV, "adding blkvsc_req to pending_list - blkvsc_req %p start_sect %llu sect_count %d (%llu %d)\n",
+ DPRINT_DBG(BLKVSC_DRV, "adding blkvsc_req to pending_list - blkvsc_req %p start_sect %llu sect_count %ld (%llu %ld)\n",
blkvsc_req, blkvsc_req->sector_start, blkvsc_req->sector_count, start_sector, num_sectors);
list_add_tail(&blkvsc_req->pend_entry, &blkdev->pending_list);
@@ -1101,7 +1101,7 @@ static int blkvsc_do_request(struct bloc
list_add_tail(&blkvsc_req->pend_entry, &blkdev->pending_list);
}
- DPRINT_DBG(BLKVSC_DRV, "submitted blkvsc_req %p start_sect %llu sect_count %d (%llu %d) ret %d\n",
+ DPRINT_DBG(BLKVSC_DRV, "submitted blkvsc_req %p start_sect %llu sect_count %ld (%llu %ld) ret %d\n",
blkvsc_req, blkvsc_req->sector_start, blkvsc_req->sector_count, start_sector, num_sectors, ret);
}
}
@@ -1141,7 +1141,7 @@ static void blkvsc_request_completion(ST
ASSERT(blkvsc_req->group);
- DPRINT_DBG(BLKVSC_DRV, "blkdev %p blkvsc_req %p group %p type %s sect_start %llu sect_count %d len %d group outstd %d total outstd %d\n",
+ DPRINT_DBG(BLKVSC_DRV, "blkdev %p blkvsc_req %p group %p type %s sect_start %llu sect_count %ld len %d group outstd %d total outstd %d\n",
blkdev,
blkvsc_req,
blkvsc_req->group,
@@ -1163,7 +1163,7 @@ static void blkvsc_request_completion(ST
{
list_for_each_entry_safe(comp_req, tmp, &blkvsc_req->group->blkvsc_req_list, req_entry)
{
- DPRINT_DBG(BLKVSC_DRV, "completing blkvsc_req %p sect_start %llu sect_count %d \n",
+ DPRINT_DBG(BLKVSC_DRV, "completing blkvsc_req %p sect_start %llu sect_count %ld \n",
comp_req,
comp_req->sector_start,
comp_req->sector_count);
@@ -1222,7 +1222,7 @@ static int blkvsc_cancel_pending_reqs(st
// until we hit the pend_req
list_for_each_entry_safe(comp_req, tmp2, &pend_req->group->blkvsc_req_list, req_entry)
{
- DPRINT_DBG(BLKVSC_DRV, "completing blkvsc_req %p sect_start %llu sect_count %d \n",
+ DPRINT_DBG(BLKVSC_DRV, "completing blkvsc_req %p sect_start %llu sect_count %ld \n",
comp_req,
comp_req->sector_start,
comp_req->sector_count);
--- a/drivers/staging/hv/Hv.c
+++ b/drivers/staging/hv/Hv.c
@@ -300,9 +300,9 @@ HvInit (
goto Cleanup;
}
- DPRINT_INFO(VMBUS, "Hypercall page VA=0x%08x, PA=0x%08x",
- (unsigned long)gHvContext.HypercallPage,
- (unsigned long)hypercallMsr.GuestPhysicalAddress << PAGE_SHIFT);
+ DPRINT_INFO(VMBUS, "Hypercall page VA=%p, PA=0x%0llx",
+ gHvContext.HypercallPage,
+ (u64)hypercallMsr.GuestPhysicalAddress << PAGE_SHIFT);
// Setup the global signal event param for the signal event hypercall
gHvContext.SignalEventBuffer = kmalloc(sizeof(HV_INPUT_SIGNAL_EVENT_BUFFER), GFP_KERNEL);
--- a/drivers/staging/hv/StorVsc.c
+++ b/drivers/staging/hv/StorVsc.c
@@ -348,7 +348,7 @@ StorVscOnDeviceAdd(
deviceInfo->PathId = storDevice->PathId;
deviceInfo->TargetId = storDevice->TargetId;
- DPRINT_DBG(STORVSC, "assigned port %u, path %u target %u\n", storDevice->PortNumber, storDevice->PathId, storDevice->TargetId);
+ DPRINT_DBG(STORVSC, "assigned port %lu, path %u target %u\n", storDevice->PortNumber, storDevice->PathId, storDevice->TargetId);
Cleanup:
DPRINT_EXIT(STORVSC);
@@ -404,7 +404,7 @@ static int StorVscChannelInit(DEVICE_OBJ
if (vstorPacket->Operation != VStorOperationCompleteIo || vstorPacket->Status != 0)
{
- DPRINT_ERR(STORVSC, "BEGIN_INITIALIZATION_OPERATION failed (op %d status 0x%x)", vstorPacket->Operation, vstorPacket->Status);
+ DPRINT_ERR(STORVSC, "BEGIN_INITIALIZATION_OPERATION failed (op %d status 0x%lx)", vstorPacket->Operation, vstorPacket->Status);
goto Cleanup;
}
@@ -435,7 +435,7 @@ static int StorVscChannelInit(DEVICE_OBJ
// TODO: Check returned version
if (vstorPacket->Operation != VStorOperationCompleteIo || vstorPacket->Status != 0)
{
- DPRINT_ERR(STORVSC, "QUERY_PROTOCOL_VERSION_OPERATION failed (op %d status 0x%x)", vstorPacket->Operation, vstorPacket->Status);
+ DPRINT_ERR(STORVSC, "QUERY_PROTOCOL_VERSION_OPERATION failed (op %d status 0x%lx)", vstorPacket->Operation, vstorPacket->Status);
goto Cleanup;
}
@@ -465,7 +465,7 @@ static int StorVscChannelInit(DEVICE_OBJ
// TODO: Check returned version
if (vstorPacket->Operation != VStorOperationCompleteIo || vstorPacket->Status != 0)
{
- DPRINT_ERR(STORVSC, "QUERY_PROPERTIES_OPERATION failed (op %d status 0x%x)", vstorPacket->Operation, vstorPacket->Status);
+ DPRINT_ERR(STORVSC, "QUERY_PROPERTIES_OPERATION failed (op %d status 0x%lx)", vstorPacket->Operation, vstorPacket->Status);
goto Cleanup;
}
@@ -473,7 +473,7 @@ static int StorVscChannelInit(DEVICE_OBJ
storDevice->PathId = vstorPacket->StorageChannelProperties.PathId;
storDevice->TargetId = vstorPacket->StorageChannelProperties.TargetId;
- DPRINT_DBG(STORVSC, "channel flag 0x%x, max xfer len 0x%x", vstorPacket->StorageChannelProperties.Flags, vstorPacket->StorageChannelProperties.MaxTransferBytes);
+ DPRINT_DBG(STORVSC, "channel flag 0x%lx, max xfer len 0x%lx", vstorPacket->StorageChannelProperties.Flags, vstorPacket->StorageChannelProperties.MaxTransferBytes);
DPRINT_INFO(STORVSC, "END_INITIALIZATION_OPERATION...");
@@ -498,7 +498,7 @@ static int StorVscChannelInit(DEVICE_OBJ
if (vstorPacket->Operation != VStorOperationCompleteIo || vstorPacket->Status != 0)
{
- DPRINT_ERR(STORVSC, "END_INITIALIZATION_OPERATION failed (op %d status 0x%x)", vstorPacket->Operation, vstorPacket->Status);
+ DPRINT_ERR(STORVSC, "END_INITIALIZATION_OPERATION failed (op %d status 0x%lx)", vstorPacket->Operation, vstorPacket->Status);
goto Cleanup;
}
@@ -540,7 +540,7 @@ StorVscConnectToVsp(
Device
);
- DPRINT_DBG(STORVSC, "storage props: path id %d, tgt id %d, max xfer %d", props.PathId, props.TargetId, props.MaxTransferBytes);
+ DPRINT_DBG(STORVSC, "storage props: path id %d, tgt id %d, max xfer %ld", props.PathId, props.TargetId, props.MaxTransferBytes);
if (ret != 0)
{
@@ -819,7 +819,7 @@ StorVscOnIOCompletion(
return;
}
- DPRINT_DBG(STORVSC, "IO_COMPLETE_OPERATION - request extension %p completed bytes xfer %u",
+ DPRINT_DBG(STORVSC, "IO_COMPLETE_OPERATION - request extension %p completed bytes xfer %lu",
RequestExt, VStorPacket->VmSrb.DataTransferLength);
ASSERT(RequestExt != NULL);
--- a/drivers/staging/hv/storvsc_drv.c
+++ b/drivers/staging/hv/storvsc_drv.c
@@ -1054,7 +1054,7 @@ static int storvsc_device_configure(stru
DPRINT_INFO(STORVSC_DRV, "sdev (%p) - setting queue depth to %d", sdevice, STORVSC_MAX_IO_REQUESTS);
scsi_adjust_queue_depth(sdevice, MSG_SIMPLE_TAG, STORVSC_MAX_IO_REQUESTS);
- DPRINT_INFO(STORVSC_DRV, "sdev (%p) - setting max segment size to %d", sdevice, PAGE_SIZE);
+ DPRINT_INFO(STORVSC_DRV, "sdev (%p) - setting max segment size to %ld", sdevice, PAGE_SIZE);
blk_queue_max_segment_size(sdevice->request_queue, PAGE_SIZE);
DPRINT_INFO(STORVSC_DRV, "sdev (%p) - adding merge bio vec routine", sdevice);
_______________________________________________
Virtualization mailing list
Virtualization@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linux-foundation.org/mailman/listinfo/virtualization
