Implement MSI support in APIC. Note that MSI and MMIO APIC registers
are at the same memory location, but actually not on the global bus: MSI
is on PCI bus, APIC is connected directly to the CPU. We map them on the
global bus at the same address which happens to work because MSI
registers are reserved in APIC MMIO and vice versa.
Signed-off-by: Michael S. Tsirkin <mst@xxxxxxxxxx>
---
hw/apic.c | 43 +++++++++++++++++++++++++++++++++++++++----
1 files changed, 39 insertions(+), 4 deletions(-)
diff --git a/hw/apic.c b/hw/apic.c
index 3e04132..3bcab46 100644
--- a/hw/apic.c
+++ b/hw/apic.c
@@ -19,6 +19,8 @@
*/
#include "hw.h"
#include "pc.h"
+#include "pci.h"
+#include "msix.h"
#include "qemu-timer.h"
#include "host-utils.h"
@@ -63,6 +65,19 @@
#define MAX_APICS 255
#define MAX_APIC_WORDS 8
+/* Intel APIC constants: from include/asm/msidef.h */
+#define MSI_DATA_VECTOR_SHIFT 0
+#define MSI_DATA_VECTOR_MASK 0x000000ff
+#define MSI_DATA_DELIVERY_MODE_SHIFT 8
+#define MSI_DATA_TRIGGER_SHIFT 15
+#define MSI_DATA_LEVEL_SHIFT 14
+#define MSI_ADDR_DEST_MODE_SHIFT 2
+#define MSI_ADDR_DEST_ID_SHIFT 12
+#define MSI_ADDR_DEST_ID_MASK 0x00ffff0
+
+#define MSI_ADDR_BASE 0xfee00000
+#define MSI_ADDR_SIZE 0x100000
+
typedef struct APICState {
CPUState *cpu_env;
uint32_t apicbase;
@@ -731,11 +746,31 @@ static uint32_t apic_mem_readl(void *opaque, target_phys_addr_t addr)
return val;
}
+static void apic_send_msi(target_phys_addr_t addr, uint32 data)
+{
+ uint8_t dest = (addr & MSI_ADDR_DEST_ID_MASK) >> MSI_ADDR_DEST_ID_SHIFT;
+ uint8_t vector = (data & MSI_DATA_VECTOR_MASK) >> MSI_DATA_VECTOR_SHIFT;
+ uint8_t dest_mode = (addr >> MSI_ADDR_DEST_MODE_SHIFT) & 0x1;
+ uint8_t trigger_mode = (data >> MSI_DATA_TRIGGER_SHIFT) & 0x1;
+ uint8_t delivery = (data >> MSI_DATA_DELIVERY_MODE_SHIFT) & 0x7;
+ /* XXX: Ignore redirection hint. */
+ apic_deliver_irq(dest, dest_mode, delivery, vector, 0, trigger_mode);
+}
+
static void apic_mem_writel(void *opaque, target_phys_addr_t addr, uint32_t val)
{
CPUState *env;
APICState *s;
- int index;
+ int index = (addr >> 4) & 0xff;
+ if (addr > 0xfff || !index) {
+ /* MSI and MMIO APIC are at the same memory location,
+ * but actually not on the global bus: MSI is on PCI bus
+ * APIC is connected directly to the CPU.
+ * Mapping them on the global bus happens to work because
+ * MSI registers are reserved in APIC MMIO and vice versa. */
+ apic_send_msi(addr, val);
+ return;
+ }
env = cpu_single_env;
if (!env)
@@ -746,7 +781,6 @@ static void apic_mem_writel(void *opaque, target_phys_addr_t addr, uint32_t val)
printf("APIC write: %08x = %08x\n", (uint32_t)addr, val);
#endif
- index = (addr >> 4) & 0xff;
switch(index) {
case 0x02:
s->id = (val >> 24);
@@ -931,6 +965,7 @@ int apic_init(CPUState *env)
s->cpu_env = env;
apic_reset(s);
+ msix_supported = 1;
/* XXX: mapping more APICs at the same memory location */
if (apic_io_memory == 0) {
@@ -938,7 +973,8 @@ int apic_init(CPUState *env)
on the global memory bus. */
apic_io_memory = cpu_register_io_memory(apic_mem_read,
apic_mem_write, NULL);
- cpu_register_physical_memory(s->apicbase & ~0xfff, 0x1000,
+ /* XXX: what if the base changes? */
+ cpu_register_physical_memory(MSI_ADDR_BASE, MSI_ADDR_SIZE,
apic_io_memory);
}
s->timer = qemu_new_timer(vm_clock, apic_timer, s);
@@ -949,4 +985,3 @@ int apic_init(CPUState *env)
local_apics[s->idx] = s;
return 0;
}
-
--
1.6.2.2
_______________________________________________
Virtualization mailing list
Virtualization@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linux-foundation.org/mailman/listinfo/virtualization
