Signed-off-by: Isaku Yamahata <yamahata@xxxxxxxxxxxxx>
---
arch/ia64/kernel/Makefile | 2 +-
arch/ia64/kernel/entry.S | 564 +------------------------------------
arch/ia64/kernel/switch_leave.S | 594 +++++++++++++++++++++++++++++++++++++++
3 files changed, 603 insertions(+), 557 deletions(-)
create mode 100644 arch/ia64/kernel/switch_leave.S
diff --git a/arch/ia64/kernel/Makefile b/arch/ia64/kernel/Makefile
index 33e5a59..f9bc3c4 100644
--- a/arch/ia64/kernel/Makefile
+++ b/arch/ia64/kernel/Makefile
@@ -4,7 +4,7 @@
extra-y := head.o init_task.o vmlinux.lds
-obj-y := acpi.o entry.o efi.o efi_stub.o gate-data.o fsys.o ia64_ksyms.o irq.o irq_ia64.o \
+obj-y := acpi.o entry.o switch_leave.o efi.o efi_stub.o gate-data.o fsys.o ia64_ksyms.o irq.o irq_ia64.o \
irq_lsapic.o ivt.o machvec.o pal.o patch.o process.o perfmon.o ptrace.o sal.o \
salinfo.o semaphore.o setup.o signal.o sys_ia64.o time.o traps.o unaligned.o \
unwind.o mca.o mca_asm.o topology.o
diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S
index 3c331c4..df8dcc9 100644
--- a/arch/ia64/kernel/entry.S
+++ b/arch/ia64/kernel/entry.S
@@ -14,15 +14,6 @@
* Copyright (C) 1999 Walt Drummond <drummond@xxxxxxxxxxx>
*/
/*
- * ia64_switch_to now places correct virtual mapping in in TR2 for
- * kernel stack. This allows us to handle interrupts without changing
- * to physical mode.
- *
- * Jonathan Nicklin <nicklin@xxxxxxxxxxxxxxxxxxxxxxxx>
- * Patrick O'Rourke <orourke@xxxxxxxxxxxxxxxxxxxxxxxx>
- * 11/07/2000
- */
-/*
* Global (preserved) predicate usage on syscall entry/exit path:
*
* pKStk: See entry.h.
@@ -175,68 +166,6 @@ GLOBAL_ENTRY(sys_clone)
END(sys_clone)
/*
- * prev_task <- ia64_switch_to(struct task_struct *next)
- * With Ingo's new scheduler, interrupts are disabled when this routine gets
- * called. The code starting at .map relies on this. The rest of the code
- * doesn't care about the interrupt masking status.
- */
-GLOBAL_ENTRY(ia64_switch_to)
- .prologue
- alloc r16=ar.pfs,1,0,0,0
- DO_SAVE_SWITCH_STACK
- .body
-
- adds r22=IA64_TASK_THREAD_KSP_OFFSET,r13
- movl r25=init_task
- mov r27=IA64_KR(CURRENT_STACK)
- adds r21=IA64_TASK_THREAD_KSP_OFFSET,in0
- dep r20=0,in0,61,3 // physical address of "next"
- ;;
- st8 [r22]=sp // save kernel stack pointer of old task
- shr.u r26=r20,IA64_GRANULE_SHIFT
- cmp.eq p7,p6=r25,in0
- ;;
- /*
- * If we've already mapped this task's page, we can skip doing it again.
- */
-(p6) cmp.eq p7,p6=r26,r27
-(p6) br.cond.dpnt .map
- ;;
-.done:
- ld8 sp=[r21] // load kernel stack pointer of new task
- mov IA64_KR(CURRENT)=in0 // update "current" application register
- mov r8=r13 // return pointer to previously running task
- mov r13=in0 // set "current" pointer
- ;;
- DO_LOAD_SWITCH_STACK
-
-#ifdef CONFIG_SMP
- sync.i // ensure "fc"s done by this CPU are visible on other CPUs
-#endif
- br.ret.sptk.many rp // boogie on out in new context
-
-.map:
- rsm psr.ic // interrupts (psr.i) are already disabled here
- movl r25=PAGE_KERNEL
- ;;
- srlz.d
- or r23=r25,r20 // construct PA | page properties
- mov r25=IA64_GRANULE_SHIFT<<2
- ;;
- mov cr.itir=r25
- mov cr.ifa=in0 // VA of next task...
- ;;
- mov r25=IA64_TR_CURRENT_STACK
- mov IA64_KR(CURRENT_STACK)=r26 // remember last page we mapped...
- ;;
- itr.d dtr[r25]=r23 // wire in new mapping...
- ssm psr.ic // reenable the psr.ic bit
- ;;
- srlz.d
- br.cond.sptk .done
-END(ia64_switch_to)
-
-/*
* Note that interrupts are enabled during save_switch_stack and load_switch_stack. This
* means that we may get an interrupt with "sp" pointing to the new kernel stack while
* ar.bspstore is still pointing to the old kernel backing store area. Since ar.rsc,
@@ -570,7 +499,7 @@ GLOBAL_ENTRY(ia64_trace_syscall)
br.call.sptk.many rp=syscall_trace_leave // give parent a chance to catch return value
.ret3:
(pUStk) cmp.eq.unc p6,p0=r0,r0 // p6 <- pUStk
- br.cond.sptk .work_pending_syscall_end
+ br.cond.sptk ia64_work_pending_syscall_end
strace_error:
ld8 r3=[r2] // load pt_regs.r8
@@ -635,160 +564,10 @@ GLOBAL_ENTRY(ia64_ret_from_syscall)
adds r2=PT(R8)+16,sp // r2 = &pt_regs.r8
mov r10=r0 // clear error indication in r10
(p7) br.cond.spnt handle_syscall_error // handle potential syscall failure
-END(ia64_ret_from_syscall)
- // fall through
-/*
- * ia64_leave_syscall(): Same as ia64_leave_kernel, except that it doesn't
- * need to switch to bank 0 and doesn't restore the scratch registers.
- * To avoid leaking kernel bits, the scratch registers are set to
- * the following known-to-be-safe values:
- *
- * r1: restored (global pointer)
- * r2: cleared
- * r3: 1 (when returning to user-level)
- * r8-r11: restored (syscall return value(s))
- * r12: restored (user-level stack pointer)
- * r13: restored (user-level thread pointer)
- * r14: set to __kernel_syscall_via_epc
- * r15: restored (syscall #)
- * r16-r17: cleared
- * r18: user-level b6
- * r19: cleared
- * r20: user-level ar.fpsr
- * r21: user-level b0
- * r22: cleared
- * r23: user-level ar.bspstore
- * r24: user-level ar.rnat
- * r25: user-level ar.unat
- * r26: user-level ar.pfs
- * r27: user-level ar.rsc
- * r28: user-level ip
- * r29: user-level psr
- * r30: user-level cfm
- * r31: user-level pr
- * f6-f11: cleared
- * pr: restored (user-level pr)
- * b0: restored (user-level rp)
- * b6: restored
- * b7: set to __kernel_syscall_via_epc
- * ar.unat: restored (user-level ar.unat)
- * ar.pfs: restored (user-level ar.pfs)
- * ar.rsc: restored (user-level ar.rsc)
- * ar.rnat: restored (user-level ar.rnat)
- * ar.bspstore: restored (user-level ar.bspstore)
- * ar.fpsr: restored (user-level ar.fpsr)
- * ar.ccv: cleared
- * ar.csd: cleared
- * ar.ssd: cleared
- */
-ENTRY(ia64_leave_syscall)
- PT_REGS_UNWIND_INFO(0)
- /*
- * work.need_resched etc. mustn't get changed by this CPU before it returns to
- * user- or fsys-mode, hence we disable interrupts early on.
- *
- * p6 controls whether current_thread_info()->flags needs to be check for
- * extra work. We always check for extra work when returning to user-level.
- * With CONFIG_PREEMPT, we also check for extra work when the preempt_count
- * is 0. After extra work processing has been completed, execution
- * resumes at .work_processed_syscall with p6 set to 1 if the extra-work-check
- * needs to be redone.
- */
-#ifdef CONFIG_PREEMPT
- rsm psr.i // disable interrupts
- cmp.eq pLvSys,p0=r0,r0 // pLvSys=1: leave from syscall
-(pKStk) adds r20=TI_PRE_COUNT+IA64_TASK_SIZE,r13
- ;;
- .pred.rel.mutex pUStk,pKStk
-(pKStk) ld4 r21=[r20] // r21 <- preempt_count
-(pUStk) mov r21=0 // r21 <- 0
- ;;
- cmp.eq p6,p0=r21,r0 // p6 <- pUStk || (preempt_count == 0)
-#else /* !CONFIG_PREEMPT */
-(pUStk) rsm psr.i
- cmp.eq pLvSys,p0=r0,r0 // pLvSys=1: leave from syscall
-(pUStk) cmp.eq.unc p6,p0=r0,r0 // p6 <- pUStk
-#endif
-.work_processed_syscall:
- adds r2=PT(LOADRS)+16,r12
- adds r3=PT(AR_BSPSTORE)+16,r12
- adds r18=TI_FLAGS+IA64_TASK_SIZE,r13
;;
-(p6) ld4 r31=[r18] // load current_thread_info()->flags
- ld8 r19=[r2],PT(B6)-PT(LOADRS) // load ar.rsc value for "loadrs"
- nop.i 0
- ;;
- mov r16=ar.bsp // M2 get existing backing store pointer
- ld8 r18=[r2],PT(R9)-PT(B6) // load b6
-(p6) and r15=TIF_WORK_MASK,r31 // any work other than TIF_SYSCALL_TRACE?
- ;;
- ld8 r23=[r3],PT(R11)-PT(AR_BSPSTORE) // load ar.bspstore (may be garbage)
-(p6) cmp4.ne.unc p6,p0=r15, r0 // any special work pending?
-(p6) br.cond.spnt .work_pending_syscall
- ;;
- // start restoring the state saved on the kernel stack (struct pt_regs):
- ld8 r9=[r2],PT(CR_IPSR)-PT(R9)
- ld8 r11=[r3],PT(CR_IIP)-PT(R11)
-(pNonSys) break 0 // bug check: we shouldn't be here if pNonSys is TRUE!
- ;;
- invala // M0|1 invalidate ALAT
- rsm psr.i | psr.ic // M2 turn off interrupts and interruption collection
- cmp.eq p9,p0=r0,r0 // A set p9 to indicate that we should restore cr.ifs
-
- ld8 r29=[r2],16 // M0|1 load cr.ipsr
- ld8 r28=[r3],16 // M0|1 load cr.iip
- mov r22=r0 // A clear r22
- ;;
- ld8 r30=[r2],16 // M0|1 load cr.ifs
- ld8 r25=[r3],16 // M0|1 load ar.unat
-(pUStk) add r14=IA64_TASK_THREAD_ON_USTACK_OFFSET,r13
- ;;
- ld8 r26=[r2],PT(B0)-PT(AR_PFS) // M0|1 load ar.pfs
-(pKStk) mov r22=psr // M2 read PSR now that interrupts are disabled
- nop 0
- ;;
- ld8 r21=[r2],PT(AR_RNAT)-PT(B0) // M0|1 load b0
- ld8 r27=[r3],PT(PR)-PT(AR_RSC) // M0|1 load ar.rsc
- mov f6=f0 // F clear f6
+ br.cond.sptk.few ia64_leave_syscall
;;
- ld8 r24=[r2],PT(AR_FPSR)-PT(AR_RNAT) // M0|1 load ar.rnat (may be garbage)
- ld8 r31=[r3],PT(R1)-PT(PR) // M0|1 load predicates
- mov f7=f0 // F clear f7
- ;;
- ld8 r20=[r2],PT(R12)-PT(AR_FPSR) // M0|1 load ar.fpsr
- ld8.fill r1=[r3],16 // M0|1 load r1
-(pUStk) mov r17=1 // A
- ;;
-(pUStk) st1 [r14]=r17 // M2|3
- ld8.fill r13=[r3],16 // M0|1
- mov f8=f0 // F clear f8
- ;;
- ld8.fill r12=[r2] // M0|1 restore r12 (sp)
- ld8.fill r15=[r3] // M0|1 restore r15
- mov b6=r18 // I0 restore b6
-
- LOAD_PHYS_STACK_REG_SIZE(r17)
- mov f9=f0 // F clear f9
-(pKStk) br.cond.dpnt.many skip_rbs_switch // B
-
- srlz.d // M0 ensure interruption collection is off (for cover)
- shr.u r18=r19,16 // I0|1 get byte size of existing "dirty" partition
- cover // B add current frame into dirty partition & set cr.ifs
- ;;
- mov r19=ar.bsp // M2 get new backing store pointer
- mov f10=f0 // F clear f10
-
- nop.m 0
- movl r14=__kernel_syscall_via_epc // X
- ;;
- mov.m ar.csd=r0 // M2 clear ar.csd
- mov.m ar.ccv=r0 // M2 clear ar.ccv
- mov b7=r14 // I0 clear b7 (hint with __kernel_syscall_via_epc)
-
- mov.m ar.ssd=r0 // M2 clear ar.ssd
- mov f11=f0 // F clear f11
- br.cond.sptk.many rbs_switch // B
-END(ia64_leave_syscall)
+END(ia64_ret_from_syscall)
#ifdef CONFIG_IA32_SUPPORT
GLOBAL_ENTRY(ia64_ret_from_ia32_execve)
@@ -800,339 +579,12 @@ GLOBAL_ENTRY(ia64_ret_from_ia32_execve)
st8.spill [r2]=r8 // store return value in slot for r8 and set unat bit
.mem.offset 8,0
st8.spill [r3]=r0 // clear error indication in slot for r10 and set unat bit
-END(ia64_ret_from_ia32_execve)
- // fall through
-#endif /* CONFIG_IA32_SUPPORT */
-GLOBAL_ENTRY(ia64_leave_kernel)
- PT_REGS_UNWIND_INFO(0)
- /*
- * work.need_resched etc. mustn't get changed by this CPU before it returns to
- * user- or fsys-mode, hence we disable interrupts early on.
- *
- * p6 controls whether current_thread_info()->flags needs to be check for
- * extra work. We always check for extra work when returning to user-level.
- * With CONFIG_PREEMPT, we also check for extra work when the preempt_count
- * is 0. After extra work processing has been completed, execution
- * resumes at .work_processed_syscall with p6 set to 1 if the extra-work-check
- * needs to be redone.
- */
-#ifdef CONFIG_PREEMPT
- rsm psr.i // disable interrupts
- cmp.eq p0,pLvSys=r0,r0 // pLvSys=0: leave from kernel
-(pKStk) adds r20=TI_PRE_COUNT+IA64_TASK_SIZE,r13
- ;;
- .pred.rel.mutex pUStk,pKStk
-(pKStk) ld4 r21=[r20] // r21 <- preempt_count
-(pUStk) mov r21=0 // r21 <- 0
- ;;
- cmp.eq p6,p0=r21,r0 // p6 <- pUStk || (preempt_count == 0)
-#else
-(pUStk) rsm psr.i
- cmp.eq p0,pLvSys=r0,r0 // pLvSys=0: leave from kernel
-(pUStk) cmp.eq.unc p6,p0=r0,r0 // p6 <- pUStk
-#endif
-.work_processed_kernel:
- adds r17=TI_FLAGS+IA64_TASK_SIZE,r13
- ;;
-(p6) ld4 r31=[r17] // load current_thread_info()->flags
- adds r21=PT(PR)+16,r12
- ;;
-
- lfetch [r21],PT(CR_IPSR)-PT(PR)
- adds r2=PT(B6)+16,r12
- adds r3=PT(R16)+16,r12
;;
- lfetch [r21]
- ld8 r28=[r2],8 // load b6
- adds r29=PT(R24)+16,r12
-
- ld8.fill r16=[r3],PT(AR_CSD)-PT(R16)
- adds r30=PT(AR_CCV)+16,r12
-(p6) and r19=TIF_WORK_MASK,r31 // any work other than TIF_SYSCALL_TRACE?
- ;;
- ld8.fill r24=[r29]
- ld8 r15=[r30] // load ar.ccv
-(p6) cmp4.ne.unc p6,p0=r19, r0 // any special work pending?
- ;;
- ld8 r29=[r2],16 // load b7
- ld8 r30=[r3],16 // load ar.csd
-(p6) br.cond.spnt .work_pending
- ;;
- ld8 r31=[r2],16 // load ar.ssd
- ld8.fill r8=[r3],16
- ;;
- ld8.fill r9=[r2],16
- ld8.fill r10=[r3],PT(R17)-PT(R10)
- ;;
- ld8.fill r11=[r2],PT(R18)-PT(R11)
- ld8.fill r17=[r3],16
- ;;
- ld8.fill r18=[r2],16
- ld8.fill r19=[r3],16
- ;;
- ld8.fill r20=[r2],16
- ld8.fill r21=[r3],16
- mov ar.csd=r30
- mov ar.ssd=r31
- ;;
- rsm psr.i | psr.ic // initiate turning off of interrupt and interruption collection
- invala // invalidate ALAT
- ;;
- ld8.fill r22=[r2],24
- ld8.fill r23=[r3],24
- mov b6=r28
- ;;
- ld8.fill r25=[r2],16
- ld8.fill r26=[r3],16
- mov b7=r29
- ;;
- ld8.fill r27=[r2],16
- ld8.fill r28=[r3],16
- ;;
- ld8.fill r29=[r2],16
- ld8.fill r30=[r3],24
- ;;
- ld8.fill r31=[r2],PT(F9)-PT(R31)
- adds r3=PT(F10)-PT(F6),r3
- ;;
- ldf.fill f9=[r2],PT(F6)-PT(F9)
- ldf.fill f10=[r3],PT(F8)-PT(F10)
- ;;
- ldf.fill f6=[r2],PT(F7)-PT(F6)
- ;;
- ldf.fill f7=[r2],PT(F11)-PT(F7)
- ldf.fill f8=[r3],32
+ // don't fall through, ia64_leave_kernel may be #define'd
+ br.cond.sptk.few ia64_leave_kernel
;;
- srlz.d // ensure that inter. collection is off (VHPT is don't care, since text is pinned)
- mov ar.ccv=r15
- ;;
- ldf.fill f11=[r2]
- bsw.0 // switch back to bank 0 (no stop bit required beforehand...)
- ;;
-(pUStk) mov r18=IA64_KR(CURRENT)// M2 (12 cycle read latency)
- adds r16=PT(CR_IPSR)+16,r12
- adds r17=PT(CR_IIP)+16,r12
-
-(pKStk) mov r22=psr // M2 read PSR now that interrupts are disabled
- nop.i 0
- nop.i 0
- ;;
- ld8 r29=[r16],16 // load cr.ipsr
- ld8 r28=[r17],16 // load cr.iip
- ;;
- ld8 r30=[r16],16 // load cr.ifs
- ld8 r25=[r17],16 // load ar.unat
- ;;
- ld8 r26=[r16],16 // load ar.pfs
- ld8 r27=[r17],16 // load ar.rsc
- cmp.eq p9,p0=r0,r0 // set p9 to indicate that we should restore cr.ifs
- ;;
- ld8 r24=[r16],16 // load ar.rnat (may be garbage)
- ld8 r23=[r17],16 // load ar.bspstore (may be garbage)
- ;;
- ld8 r31=[r16],16 // load predicates
- ld8 r21=[r17],16 // load b0
- ;;
- ld8 r19=[r16],16 // load ar.rsc value for "loadrs"
- ld8.fill r1=[r17],16 // load r1
- ;;
- ld8.fill r12=[r16],16
- ld8.fill r13=[r17],16
-(pUStk) adds r18=IA64_TASK_THREAD_ON_USTACK_OFFSET,r18
- ;;
- ld8 r20=[r16],16 // ar.fpsr
- ld8.fill r15=[r17],16
- ;;
- ld8.fill r14=[r16],16
- ld8.fill r2=[r17]
-(pUStk) mov r17=1
- ;;
- ld8.fill r3=[r16]
-(pUStk) st1 [r18]=r17 // restore current->thread.on_ustack
- shr.u r18=r19,16 // get byte size of existing "dirty" partition
- ;;
- mov r16=ar.bsp // get existing backing store pointer
- LOAD_PHYS_STACK_REG_SIZE(r17)
-(pKStk) br.cond.dpnt skip_rbs_switch
-
- /*
- * Restore user backing store.
- *
- * NOTE: alloc, loadrs, and cover can't be predicated.
- */
-(pNonSys) br.cond.dpnt dont_preserve_current_frame
- cover // add current frame into dirty partition and set cr.ifs
- ;;
- mov r19=ar.bsp // get new backing store pointer
-rbs_switch:
- sub r16=r16,r18 // krbs = old bsp - size of dirty partition
- cmp.ne p9,p0=r0,r0 // clear p9 to skip restore of cr.ifs
- ;;
- sub r19=r19,r16 // calculate total byte size of dirty partition
- add r18=64,r18 // don't force in0-in7 into memory...
- ;;
- shl r19=r19,16 // shift size of dirty partition into loadrs position
- ;;
-dont_preserve_current_frame:
- /*
- * To prevent leaking bits between the kernel and user-space,
- * we must clear the stacked registers in the "invalid" partition here.
- * Not pretty, but at least it's fast (3.34 registers/cycle on Itanium,
- * 5 registers/cycle on McKinley).
- */
-# define pRecurse p6
-# define pReturn p7
-#ifdef CONFIG_ITANIUM
-# define Nregs 10
-#else
-# define Nregs 14
-#endif
- alloc loc0=ar.pfs,2,Nregs-2,2,0
- shr.u loc1=r18,9 // RNaTslots <= floor(dirtySize / (64*8))
- sub r17=r17,r18 // r17 = (physStackedSize + 8) - dirtySize
- ;;
- mov ar.rsc=r19 // load ar.rsc to be used for "loadrs"
- shladd in0=loc1,3,r17
- mov in1=0
- ;;
- TEXT_ALIGN(32)
-rse_clear_invalid:
-#ifdef CONFIG_ITANIUM
- // cycle 0
- { .mii
- alloc loc0=ar.pfs,2,Nregs-2,2,0
- cmp.lt pRecurse,p0=Nregs*8,in0 // if more than Nregs regs left to clear, (re)curse
- add out0=-Nregs*8,in0
-}{ .mfb
- add out1=1,in1 // increment recursion count
- nop.f 0
- nop.b 0 // can't do br.call here because of alloc (WAW on CFM)
- ;;
-}{ .mfi // cycle 1
- mov loc1=0
- nop.f 0
- mov loc2=0
-}{ .mib
- mov loc3=0
- mov loc4=0
-(pRecurse) br.call.sptk.many b0=rse_clear_invalid
-
-}{ .mfi // cycle 2
- mov loc5=0
- nop.f 0
- cmp.ne pReturn,p0=r0,in1 // if recursion count != 0, we need to do a br.ret
-}{ .mib
- mov loc6=0
- mov loc7=0
-(pReturn) br.ret.sptk.many b0
-}
-#else /* !CONFIG_ITANIUM */
- alloc loc0=ar.pfs,2,Nregs-2,2,0
- cmp.lt pRecurse,p0=Nregs*8,in0 // if more than Nregs regs left to clear, (re)curse
- add out0=-Nregs*8,in0
- add out1=1,in1 // increment recursion count
- mov loc1=0
- mov loc2=0
- ;;
- mov loc3=0
- mov loc4=0
- mov loc5=0
- mov loc6=0
- mov loc7=0
-(pRecurse) br.call.dptk.few b0=rse_clear_invalid
- ;;
- mov loc8=0
- mov loc9=0
- cmp.ne pReturn,p0=r0,in1 // if recursion count != 0, we need to do a br.ret
- mov loc10=0
- mov loc11=0
-(pReturn) br.ret.dptk.many b0
-#endif /* !CONFIG_ITANIUM */
-# undef pRecurse
-# undef pReturn
- ;;
- alloc r17=ar.pfs,0,0,0,0 // drop current register frame
- ;;
- loadrs
- ;;
-skip_rbs_switch:
- mov ar.unat=r25 // M2
-(pKStk) extr.u r22=r22,21,1 // I0 extract current value of psr.pp from r22
-(pLvSys)mov r19=r0 // A clear r19 for leave_syscall, no-op otherwise
- ;;
-(pUStk) mov ar.bspstore=r23 // M2
-(pKStk) dep r29=r22,r29,21,1 // I0 update ipsr.pp with psr.pp
-(pLvSys)mov r16=r0 // A clear r16 for leave_syscall, no-op otherwise
- ;;
- mov cr.ipsr=r29 // M2
- mov ar.pfs=r26 // I0
-(pLvSys)mov r17=r0 // A clear r17 for leave_syscall, no-op otherwise
-
-(p9) mov cr.ifs=r30 // M2
- mov b0=r21 // I0
-(pLvSys)mov r18=r0 // A clear r18 for leave_syscall, no-op otherwise
-
- mov ar.fpsr=r20 // M2
- mov cr.iip=r28 // M2
- nop 0
- ;;
-(pUStk) mov ar.rnat=r24 // M2 must happen with RSE in lazy mode
- nop 0
-(pLvSys)mov r2=r0
-
- mov ar.rsc=r27 // M2
- mov pr=r31,-1 // I0
- rfi // B
-
- /*
- * On entry:
- * r20 = ¤t->thread_info->pre_count (if CONFIG_PREEMPT)
- * r31 = current->thread_info->flags
- * On exit:
- * p6 = TRUE if work-pending-check needs to be redone
- */
-.work_pending_syscall:
- add r2=-8,r2
- add r3=-8,r3
- ;;
- st8 [r2]=r8
- st8 [r3]=r10
-.work_pending:
- tbit.z p6,p0=r31,TIF_NEED_RESCHED // current_thread_info()->need_resched==0?
-(p6) br.cond.sptk.few .notify
-#ifdef CONFIG_PREEMPT
-(pKStk) dep r21=-1,r0,PREEMPT_ACTIVE_BIT,1
- ;;
-(pKStk) st4 [r20]=r21
- ssm psr.i // enable interrupts
-#endif
- br.call.spnt.many rp=schedule
-.ret9: cmp.eq p6,p0=r0,r0 // p6 <- 1
- rsm psr.i // disable interrupts
- ;;
-#ifdef CONFIG_PREEMPT
-(pKStk) adds r20=TI_PRE_COUNT+IA64_TASK_SIZE,r13
- ;;
-(pKStk) st4 [r20]=r0 // preempt_count() <- 0
-#endif
-(pLvSys)br.cond.sptk.few .work_pending_syscall_end
- br.cond.sptk.many .work_processed_kernel // re-check
-
-.notify:
-(pUStk) br.call.spnt.many rp=notify_resume_user
-.ret10: cmp.ne p6,p0=r0,r0 // p6 <- 0
-(pLvSys)br.cond.sptk.few .work_pending_syscall_end
- br.cond.sptk.many .work_processed_kernel // don't re-check
-
-.work_pending_syscall_end:
- adds r2=PT(R8)+16,r12
- adds r3=PT(R10)+16,r12
- ;;
- ld8 r8=[r2]
- ld8 r10=[r3]
- br.cond.sptk.many .work_processed_syscall // re-check
-
-END(ia64_leave_kernel)
+END(ia64_ret_from_ia32_execve)
+#endif /* CONFIG_IA32_SUPPORT */
ENTRY(handle_syscall_error)
/*
@@ -1234,7 +686,7 @@ ENTRY(sys_rt_sigreturn)
adds sp=16,sp
;;
ld8 r9=[sp] // load new ar.unat
- mov.sptk b7=r8,ia64_leave_kernel
+ mov b7=r8
;;
mov ar.unat=r9
br.many b7
diff --git a/arch/ia64/kernel/switch_leave.S b/arch/ia64/kernel/switch_leave.S
new file mode 100644
index 0000000..5ca5b84
--- /dev/null
+++ b/arch/ia64/kernel/switch_leave.S
@@ -0,0 +1,594 @@
+/*
+ * arch/ia64/kernel/switch_leave.S
+ * Kernel entry points.
+ * ia64_switch_to(), ia64_leave_syscall() and ia64_leave_kernel()
+ * split from arch/ia64/kernel/entry.S for paravirtualization
+ *
+ * Copyright (C) 1998-2003, 2005 Hewlett-Packard Co
+ * David Mosberger-Tang <davidm@xxxxxxxxxx>
+ * Copyright (C) 1999, 2002-2003
+ * Asit Mallick <Asit.K.Mallick@xxxxxxxxx>
+ * Don Dugger <Don.Dugger@xxxxxxxxx>
+ * Suresh Siddha <suresh.b.siddha@xxxxxxxxx>
+ * Fenghua Yu <fenghua.yu@xxxxxxxxx>
+ * Copyright (C) 1999 VA Linux Systems
+ * Copyright (C) 1999 Walt Drummond <drummond@xxxxxxxxxxx>
+ */
+/*
+ * ia64_switch_to now places correct virtual mapping in in TR2 for
+ * kernel stack. This allows us to handle interrupts without changing
+ * to physical mode.
+ *
+ * Jonathan Nicklin <nicklin@xxxxxxxxxxxxxxxxxxxxxxxx>
+ * Patrick O'Rourke <orourke@xxxxxxxxxxxxxxxxxxxxxxxx>
+ * 11/07/2000
+ */
+/*
+ * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp>
+ * VA Linux Systems Japan K.K.
+ * pv_ops.
+ */
+/*
+ * Global (preserved) predicate usage on syscall entry/exit path:
+ *
+ * pKStk: See entry.h.
+ * pUStk: See entry.h.
+ * pSys: See entry.h.
+ * pNonSys: !pSys
+ */
+
+
+#include <asm/asmmacro.h>
+#include <asm/kregs.h>
+#include <asm/asm-offsets.h>
+#include <asm/pgtable.h>
+#include <asm/thread_info.h>
+
+#include "minstate.h"
+
+
+/*
+ * prev_task <- ia64_switch_to(struct task_struct *next)
+ * With Ingo's new scheduler, interrupts are disabled when this routine gets
+ * called. The code starting at .map relies on this. The rest of the code
+ * doesn't care about the interrupt masking status.
+ */
+GLOBAL_ENTRY(ia64_switch_to)
+ .prologue
+ alloc r16=ar.pfs,1,0,0,0
+ DO_SAVE_SWITCH_STACK
+ .body
+
+ adds r22=IA64_TASK_THREAD_KSP_OFFSET,r13
+ movl r25=init_task
+ mov r27=IA64_KR(CURRENT_STACK)
+ adds r21=IA64_TASK_THREAD_KSP_OFFSET,in0
+ dep r20=0,in0,61,3 // physical address of "next"
+ ;;
+ st8 [r22]=sp // save kernel stack pointer of old task
+ shr.u r26=r20,IA64_GRANULE_SHIFT
+ cmp.eq p7,p6=r25,in0
+ ;;
+ /*
+ * If we've already mapped this task's page, we can skip doing it again.
+ */
+(p6) cmp.eq p7,p6=r26,r27
+(p6) br.cond.dpnt .map
+ ;;
+.done:
+ ld8 sp=[r21] // load kernel stack pointer of new task
+ mov IA64_KR(CURRENT)=in0 // update "current" application register
+ mov r8=r13 // return pointer to previously running task
+ mov r13=in0 // set "current" pointer
+ ;;
+ DO_LOAD_SWITCH_STACK
+
+#ifdef CONFIG_SMP
+ sync.i // ensure "fc"s done by this CPU are visible on other CPUs
+#endif
+ br.ret.sptk.many rp // boogie on out in new context
+
+.map:
+ rsm psr.ic // interrupts (psr.i) are already disabled here
+ movl r25=PAGE_KERNEL
+ ;;
+ srlz.d
+ or r23=r25,r20 // construct PA | page properties
+ mov r25=IA64_GRANULE_SHIFT<<2
+ ;;
+ mov cr.itir=r25
+ mov cr.ifa=in0 // VA of next task...
+ ;;
+ mov r25=IA64_TR_CURRENT_STACK
+ mov IA64_KR(CURRENT_STACK)=r26 // remember last page we mapped...
+ ;;
+ itr.d dtr[r25]=r23 // wire in new mapping...
+ ssm psr.ic // reenable the psr.ic bit
+ ;;
+ srlz.d
+ br.cond.sptk .done
+END(ia64_switch_to)
+
+/*
+ * ia64_leave_syscall(): Same as ia64_leave_kernel, except that it doesn't
+ * need to switch to bank 0 and doesn't restore the scratch registers.
+ * To avoid leaking kernel bits, the scratch registers are set to
+ * the following known-to-be-safe values:
+ *
+ * r1: restored (global pointer)
+ * r2: cleared
+ * r3: 1 (when returning to user-level)
+ * r8-r11: restored (syscall return value(s))
+ * r12: restored (user-level stack pointer)
+ * r13: restored (user-level thread pointer)
+ * r14: set to __kernel_syscall_via_epc
+ * r15: restored (syscall #)
+ * r16-r17: cleared
+ * r18: user-level b6
+ * r19: cleared
+ * r20: user-level ar.fpsr
+ * r21: user-level b0
+ * r22: cleared
+ * r23: user-level ar.bspstore
+ * r24: user-level ar.rnat
+ * r25: user-level ar.unat
+ * r26: user-level ar.pfs
+ * r27: user-level ar.rsc
+ * r28: user-level ip
+ * r29: user-level psr
+ * r30: user-level cfm
+ * r31: user-level pr
+ * f6-f11: cleared
+ * pr: restored (user-level pr)
+ * b0: restored (user-level rp)
+ * b6: restored
+ * b7: set to __kernel_syscall_via_epc
+ * ar.unat: restored (user-level ar.unat)
+ * ar.pfs: restored (user-level ar.pfs)
+ * ar.rsc: restored (user-level ar.rsc)
+ * ar.rnat: restored (user-level ar.rnat)
+ * ar.bspstore: restored (user-level ar.bspstore)
+ * ar.fpsr: restored (user-level ar.fpsr)
+ * ar.ccv: cleared
+ * ar.csd: cleared
+ * ar.ssd: cleared
+ */
+ENTRY(ia64_leave_syscall)
+ PT_REGS_UNWIND_INFO(0)
+ /*
+ * work.need_resched etc. mustn't get changed by this CPU before it returns to
+ * user- or fsys-mode, hence we disable interrupts early on.
+ *
+ * p6 controls whether current_thread_info()->flags needs to be check for
+ * extra work. We always check for extra work when returning to user-level.
+ * With CONFIG_PREEMPT, we also check for extra work when the preempt_count
+ * is 0. After extra work processing has been completed, execution
+ * resumes at .work_processed_syscall with p6 set to 1 if the extra-work-check
+ * needs to be redone.
+ */
+#ifdef CONFIG_PREEMPT
+ rsm psr.i // disable interrupts
+ cmp.eq pLvSys,p0=r0,r0 // pLvSys=1: leave from syscall
+(pKStk) adds r20=TI_PRE_COUNT+IA64_TASK_SIZE,r13
+ ;;
+ .pred.rel.mutex pUStk,pKStk
+(pKStk) ld4 r21=[r20] // r21 <- preempt_count
+(pUStk) mov r21=0 // r21 <- 0
+ ;;
+ cmp.eq p6,p0=r21,r0 // p6 <- pUStk || (preempt_count == 0)
+#else /* !CONFIG_PREEMPT */
+(pUStk) rsm psr.i
+ cmp.eq pLvSys,p0=r0,r0 // pLvSys=1: leave from syscall
+(pUStk) cmp.eq.unc p6,p0=r0,r0 // p6 <- pUStk
+#endif
+.work_processed_syscall:
+ adds r2=PT(LOADRS)+16,r12
+ adds r3=PT(AR_BSPSTORE)+16,r12
+ adds r18=TI_FLAGS+IA64_TASK_SIZE,r13
+ ;;
+(p6) ld4 r31=[r18] // load current_thread_info()->flags
+ ld8 r19=[r2],PT(B6)-PT(LOADRS) // load ar.rsc value for "loadrs"
+ nop.i 0
+ ;;
+ mov r16=ar.bsp // M2 get existing backing store pointer
+ ld8 r18=[r2],PT(R9)-PT(B6) // load b6
+(p6) and r15=TIF_WORK_MASK,r31 // any work other than TIF_SYSCALL_TRACE?
+ ;;
+ ld8 r23=[r3],PT(R11)-PT(AR_BSPSTORE) // load ar.bspstore (may be garbage)
+(p6) cmp4.ne.unc p6,p0=r15, r0 // any special work pending?
+(p6) br.cond.spnt .work_pending_syscall
+ ;;
+ // start restoring the state saved on the kernel stack (struct pt_regs):
+ ld8 r9=[r2],PT(CR_IPSR)-PT(R9)
+ ld8 r11=[r3],PT(CR_IIP)-PT(R11)
+(pNonSys) break 0 // bug check: we shouldn't be here if pNonSys is TRUE!
+ ;;
+ invala // M0|1 invalidate ALAT
+ rsm psr.i | psr.ic // M2 turn off interrupts and interruption collection
+ cmp.eq p9,p0=r0,r0 // A set p9 to indicate that we should restore cr.ifs
+
+ ld8 r29=[r2],16 // M0|1 load cr.ipsr
+ ld8 r28=[r3],16 // M0|1 load cr.iip
+ mov r22=r0 // A clear r22
+ ;;
+ ld8 r30=[r2],16 // M0|1 load cr.ifs
+ ld8 r25=[r3],16 // M0|1 load ar.unat
+(pUStk) add r14=IA64_TASK_THREAD_ON_USTACK_OFFSET,r13
+ ;;
+ ld8 r26=[r2],PT(B0)-PT(AR_PFS) // M0|1 load ar.pfs
+(pKStk) mov r22=psr // M2 read PSR now that interrupts are disabled
+ nop 0
+ ;;
+ ld8 r21=[r2],PT(AR_RNAT)-PT(B0) // M0|1 load b0
+ ld8 r27=[r3],PT(PR)-PT(AR_RSC) // M0|1 load ar.rsc
+ mov f6=f0 // F clear f6
+ ;;
+ ld8 r24=[r2],PT(AR_FPSR)-PT(AR_RNAT) // M0|1 load ar.rnat (may be garbage)
+ ld8 r31=[r3],PT(R1)-PT(PR) // M0|1 load predicates
+ mov f7=f0 // F clear f7
+ ;;
+ ld8 r20=[r2],PT(R12)-PT(AR_FPSR) // M0|1 load ar.fpsr
+ ld8.fill r1=[r3],16 // M0|1 load r1
+(pUStk) mov r17=1 // A
+ ;;
+(pUStk) st1 [r14]=r17 // M2|3
+ ld8.fill r13=[r3],16 // M0|1
+ mov f8=f0 // F clear f8
+ ;;
+ ld8.fill r12=[r2] // M0|1 restore r12 (sp)
+ ld8.fill r15=[r3] // M0|1 restore r15
+ mov b6=r18 // I0 restore b6
+
+ LOAD_PHYS_STACK_REG_SIZE(r17)
+ mov f9=f0 // F clear f9
+(pKStk) br.cond.dpnt.many skip_rbs_switch // B
+
+ srlz.d // M0 ensure interruption collection is off (for cover)
+ shr.u r18=r19,16 // I0|1 get byte size of existing "dirty" partition
+ cover // B add current frame into dirty partition & set cr.ifs
+ ;;
+ mov r19=ar.bsp // M2 get new backing store pointer
+ mov f10=f0 // F clear f10
+
+ nop.m 0
+ movl r14=__kernel_syscall_via_epc // X
+ ;;
+ mov.m ar.csd=r0 // M2 clear ar.csd
+ mov.m ar.ccv=r0 // M2 clear ar.ccv
+ mov b7=r14 // I0 clear b7 (hint with __kernel_syscall_via_epc)
+
+ mov.m ar.ssd=r0 // M2 clear ar.ssd
+ mov f11=f0 // F clear f11
+ br.cond.sptk.many rbs_switch // B
+END(ia64_leave_syscall)
+
+GLOBAL_ENTRY(ia64_leave_kernel)
+ PT_REGS_UNWIND_INFO(0)
+ /*
+ * work.need_resched etc. mustn't get changed by this CPU before it returns to
+ * user- or fsys-mode, hence we disable interrupts early on.
+ *
+ * p6 controls whether current_thread_info()->flags needs to be check for
+ * extra work. We always check for extra work when returning to user-level.
+ * With CONFIG_PREEMPT, we also check for extra work when the preempt_count
+ * is 0. After extra work processing has been completed, execution
+ * resumes at .work_processed_syscall with p6 set to 1 if the extra-work-check
+ * needs to be redone.
+ */
+#ifdef CONFIG_PREEMPT
+ rsm psr.i // disable interrupts
+ cmp.eq p0,pLvSys=r0,r0 // pLvSys=0: leave from kernel
+(pKStk) adds r20=TI_PRE_COUNT+IA64_TASK_SIZE,r13
+ ;;
+ .pred.rel.mutex pUStk,pKStk
+(pKStk) ld4 r21=[r20] // r21 <- preempt_count
+(pUStk) mov r21=0 // r21 <- 0
+ ;;
+ cmp.eq p6,p0=r21,r0 // p6 <- pUStk || (preempt_count == 0)
+#else
+(pUStk) rsm psr.i
+ cmp.eq p0,pLvSys=r0,r0 // pLvSys=0: leave from kernel
+(pUStk) cmp.eq.unc p6,p0=r0,r0 // p6 <- pUStk
+#endif
+.work_processed_kernel:
+ adds r17=TI_FLAGS+IA64_TASK_SIZE,r13
+ ;;
+(p6) ld4 r31=[r17] // load current_thread_info()->flags
+ adds r21=PT(PR)+16,r12
+ ;;
+
+ lfetch [r21],PT(CR_IPSR)-PT(PR)
+ adds r2=PT(B6)+16,r12
+ adds r3=PT(R16)+16,r12
+ ;;
+ lfetch [r21]
+ ld8 r28=[r2],8 // load b6
+ adds r29=PT(R24)+16,r12
+
+ ld8.fill r16=[r3],PT(AR_CSD)-PT(R16)
+ adds r30=PT(AR_CCV)+16,r12
+(p6) and r19=TIF_WORK_MASK,r31 // any work other than TIF_SYSCALL_TRACE?
+ ;;
+ ld8.fill r24=[r29]
+ ld8 r15=[r30] // load ar.ccv
+(p6) cmp4.ne.unc p6,p0=r19, r0 // any special work pending?
+ ;;
+ ld8 r29=[r2],16 // load b7
+ ld8 r30=[r3],16 // load ar.csd
+(p6) br.cond.spnt .work_pending
+ ;;
+ ld8 r31=[r2],16 // load ar.ssd
+ ld8.fill r8=[r3],16
+ ;;
+ ld8.fill r9=[r2],16
+ ld8.fill r10=[r3],PT(R17)-PT(R10)
+ ;;
+ ld8.fill r11=[r2],PT(R18)-PT(R11)
+ ld8.fill r17=[r3],16
+ ;;
+ ld8.fill r18=[r2],16
+ ld8.fill r19=[r3],16
+ ;;
+ ld8.fill r20=[r2],16
+ ld8.fill r21=[r3],16
+ mov ar.csd=r30
+ mov ar.ssd=r31
+ ;;
+ rsm psr.i | psr.ic // initiate turning off of interrupt and interruption collection
+ invala // invalidate ALAT
+ ;;
+ ld8.fill r22=[r2],24
+ ld8.fill r23=[r3],24
+ mov b6=r28
+ ;;
+ ld8.fill r25=[r2],16
+ ld8.fill r26=[r3],16
+ mov b7=r29
+ ;;
+ ld8.fill r27=[r2],16
+ ld8.fill r28=[r3],16
+ ;;
+ ld8.fill r29=[r2],16
+ ld8.fill r30=[r3],24
+ ;;
+ ld8.fill r31=[r2],PT(F9)-PT(R31)
+ adds r3=PT(F10)-PT(F6),r3
+ ;;
+ ldf.fill f9=[r2],PT(F6)-PT(F9)
+ ldf.fill f10=[r3],PT(F8)-PT(F10)
+ ;;
+ ldf.fill f6=[r2],PT(F7)-PT(F6)
+ ;;
+ ldf.fill f7=[r2],PT(F11)-PT(F7)
+ ldf.fill f8=[r3],32
+ ;;
+ srlz.d // ensure that inter. collection is off (VHPT is don't care, since text is pinned)
+ mov ar.ccv=r15
+ ;;
+ ldf.fill f11=[r2]
+ bsw.0 // switch back to bank 0 (no stop bit required beforehand...)
+ ;;
+(pUStk) mov r18=IA64_KR(CURRENT)// M2 (12 cycle read latency)
+ adds r16=PT(CR_IPSR)+16,r12
+ adds r17=PT(CR_IIP)+16,r12
+
+(pKStk) mov r22=psr // M2 read PSR now that interrupts are disabled
+ nop.i 0
+ nop.i 0
+ ;;
+ ld8 r29=[r16],16 // load cr.ipsr
+ ld8 r28=[r17],16 // load cr.iip
+ ;;
+ ld8 r30=[r16],16 // load cr.ifs
+ ld8 r25=[r17],16 // load ar.unat
+ ;;
+ ld8 r26=[r16],16 // load ar.pfs
+ ld8 r27=[r17],16 // load ar.rsc
+ cmp.eq p9,p0=r0,r0 // set p9 to indicate that we should restore cr.ifs
+ ;;
+ ld8 r24=[r16],16 // load ar.rnat (may be garbage)
+ ld8 r23=[r17],16 // load ar.bspstore (may be garbage)
+ ;;
+ ld8 r31=[r16],16 // load predicates
+ ld8 r21=[r17],16 // load b0
+ ;;
+ ld8 r19=[r16],16 // load ar.rsc value for "loadrs"
+ ld8.fill r1=[r17],16 // load r1
+ ;;
+ ld8.fill r12=[r16],16
+ ld8.fill r13=[r17],16
+(pUStk) adds r18=IA64_TASK_THREAD_ON_USTACK_OFFSET,r18
+ ;;
+ ld8 r20=[r16],16 // ar.fpsr
+ ld8.fill r15=[r17],16
+ ;;
+ ld8.fill r14=[r16],16
+ ld8.fill r2=[r17]
+(pUStk) mov r17=1
+ ;;
+ ld8.fill r3=[r16]
+(pUStk) st1 [r18]=r17 // restore current->thread.on_ustack
+ shr.u r18=r19,16 // get byte size of existing "dirty" partition
+ ;;
+ mov r16=ar.bsp // get existing backing store pointer
+ LOAD_PHYS_STACK_REG_SIZE(r17)
+(pKStk) br.cond.dpnt skip_rbs_switch
+
+ /*
+ * Restore user backing store.
+ *
+ * NOTE: alloc, loadrs, and cover can't be predicated.
+ */
+(pNonSys) br.cond.dpnt dont_preserve_current_frame
+ cover // add current frame into dirty partition and set cr.ifs
+ ;;
+ mov r19=ar.bsp // get new backing store pointer
+rbs_switch:
+ sub r16=r16,r18 // krbs = old bsp - size of dirty partition
+ cmp.ne p9,p0=r0,r0 // clear p9 to skip restore of cr.ifs
+ ;;
+ sub r19=r19,r16 // calculate total byte size of dirty partition
+ add r18=64,r18 // don't force in0-in7 into memory...
+ ;;
+ shl r19=r19,16 // shift size of dirty partition into loadrs position
+ ;;
+dont_preserve_current_frame:
+ /*
+ * To prevent leaking bits between the kernel and user-space,
+ * we must clear the stacked registers in the "invalid" partition here.
+ * Not pretty, but at least it's fast (3.34 registers/cycle on Itanium,
+ * 5 registers/cycle on McKinley).
+ */
+# define pRecurse p6
+# define pReturn p7
+#ifdef CONFIG_ITANIUM
+# define Nregs 10
+#else
+# define Nregs 14
+#endif
+ alloc loc0=ar.pfs,2,Nregs-2,2,0
+ shr.u loc1=r18,9 // RNaTslots <= floor(dirtySize / (64*8))
+ sub r17=r17,r18 // r17 = (physStackedSize + 8) - dirtySize
+ ;;
+ mov ar.rsc=r19 // load ar.rsc to be used for "loadrs"
+ shladd in0=loc1,3,r17
+ mov in1=0
+ ;;
+ TEXT_ALIGN(32)
+rse_clear_invalid:
+#ifdef CONFIG_ITANIUM
+ // cycle 0
+ { .mii
+ alloc loc0=ar.pfs,2,Nregs-2,2,0
+ cmp.lt pRecurse,p0=Nregs*8,in0 // if more than Nregs regs left to clear, (re)curse
+ add out0=-Nregs*8,in0
+}{ .mfb
+ add out1=1,in1 // increment recursion count
+ nop.f 0
+ nop.b 0 // can't do br.call here because of alloc (WAW on CFM)
+ ;;
+}{ .mfi // cycle 1
+ mov loc1=0
+ nop.f 0
+ mov loc2=0
+}{ .mib
+ mov loc3=0
+ mov loc4=0
+(pRecurse) br.call.sptk.many b0=rse_clear_invalid
+
+}{ .mfi // cycle 2
+ mov loc5=0
+ nop.f 0
+ cmp.ne pReturn,p0=r0,in1 // if recursion count != 0, we need to do a br.ret
+}{ .mib
+ mov loc6=0
+ mov loc7=0
+(pReturn) br.ret.sptk.many b0
+}
+#else /* !CONFIG_ITANIUM */
+ alloc loc0=ar.pfs,2,Nregs-2,2,0
+ cmp.lt pRecurse,p0=Nregs*8,in0 // if more than Nregs regs left to clear, (re)curse
+ add out0=-Nregs*8,in0
+ add out1=1,in1 // increment recursion count
+ mov loc1=0
+ mov loc2=0
+ ;;
+ mov loc3=0
+ mov loc4=0
+ mov loc5=0
+ mov loc6=0
+ mov loc7=0
+(pRecurse) br.call.dptk.few b0=rse_clear_invalid
+ ;;
+ mov loc8=0
+ mov loc9=0
+ cmp.ne pReturn,p0=r0,in1 // if recursion count != 0, we need to do a br.ret
+ mov loc10=0
+ mov loc11=0
+(pReturn) br.ret.dptk.many b0
+#endif /* !CONFIG_ITANIUM */
+# undef pRecurse
+# undef pReturn
+ ;;
+ alloc r17=ar.pfs,0,0,0,0 // drop current register frame
+ ;;
+ loadrs
+ ;;
+skip_rbs_switch:
+ mov ar.unat=r25 // M2
+(pKStk) extr.u r22=r22,21,1 // I0 extract current value of psr.pp from r22
+(pLvSys)mov r19=r0 // A clear r19 for leave_syscall, no-op otherwise
+ ;;
+(pUStk) mov ar.bspstore=r23 // M2
+(pKStk) dep r29=r22,r29,21,1 // I0 update ipsr.pp with psr.pp
+(pLvSys)mov r16=r0 // A clear r16 for leave_syscall, no-op otherwise
+ ;;
+ mov cr.ipsr=r29 // M2
+ mov ar.pfs=r26 // I0
+(pLvSys)mov r17=r0 // A clear r17 for leave_syscall, no-op otherwise
+
+(p9) mov cr.ifs=r30 // M2
+ mov b0=r21 // I0
+(pLvSys)mov r18=r0 // A clear r18 for leave_syscall, no-op otherwise
+
+ mov ar.fpsr=r20 // M2
+ mov cr.iip=r28 // M2
+ nop 0
+ ;;
+(pUStk) mov ar.rnat=r24 // M2 must happen with RSE in lazy mode
+ nop 0
+(pLvSys)mov r2=r0
+
+ mov ar.rsc=r27 // M2
+ mov pr=r31,-1 // I0
+ rfi // B
+
+ /*
+ * On entry:
+ * r20 = ¤t->thread_info->pre_count (if CONFIG_PREEMPT)
+ * r31 = current->thread_info->flags
+ * On exit:
+ * p6 = TRUE if work-pending-check needs to be redone
+ */
+.work_pending_syscall:
+ add r2=-8,r2
+ add r3=-8,r3
+ ;;
+ st8 [r2]=r8
+ st8 [r3]=r10
+.work_pending:
+ tbit.z p6,p0=r31,TIF_NEED_RESCHED // current_thread_info()->need_resched==0?
+(p6) br.cond.sptk.few .notify
+#ifdef CONFIG_PREEMPT
+(pKStk) dep r21=-1,r0,PREEMPT_ACTIVE_BIT,1
+ ;;
+(pKStk) st4 [r20]=r21
+ ssm psr.i // enable interrupts
+#endif
+ br.call.spnt.many rp=schedule
+.ret9: cmp.eq p6,p0=r0,r0 // p6 <- 1
+ rsm psr.i // disable interrupts
+ ;;
+#ifdef CONFIG_PREEMPT
+(pKStk) adds r20=TI_PRE_COUNT+IA64_TASK_SIZE,r13
+ ;;
+(pKStk) st4 [r20]=r0 // preempt_count() <- 0
+#endif
+(pLvSys)br.cond.sptk.few ia64_work_pending_syscall_end
+ br.cond.sptk.many .work_processed_kernel // re-check
+
+.notify:
+(pUStk) br.call.spnt.many rp=notify_resume_user
+.ret10: cmp.ne p6,p0=r0,r0 // p6 <- 0
+(pLvSys)br.cond.sptk.few ia64_work_pending_syscall_end
+ br.cond.sptk.many .work_processed_kernel // don't re-check
+
+.global ia64_work_pending_syscall_end;
+ia64_work_pending_syscall_end:
+ adds r2=PT(R8)+16,r12
+ adds r3=PT(R10)+16,r12
+ ;;
+ ld8 r8=[r2]
+ ld8 r10=[r3]
+ br.cond.sptk.many .work_processed_syscall // re-check
+END(ia64_leave_kernel)
--
1.5.3
_______________________________________________
Virtualization mailing list
Virtualization@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linux-foundation.org/mailman/listinfo/virtualization
