From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
CONFIG_USB_DEBUG is going away, and all of the other USB drivers no
longer rely on "debug" module parameters for debugging lines, so move
the pcwd_usb driver to use the dynamic debug infrastructure to be more
in line with the rest of the kernel.
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Cc: Wim Van Sebroeck <wim@xxxxxxxxx>
---
drivers/watchdog/pcwd_usb.c | 40 +++++++++++-----------------------------
1 file changed, 11 insertions(+), 29 deletions(-)
--- a/drivers/watchdog/pcwd_usb.c
+++ b/drivers/watchdog/pcwd_usb.c
@@ -44,23 +44,6 @@
#include <linux/hid.h> /* For HID_REQ_SET_REPORT & HID_DT_REPORT */
#include <linux/uaccess.h> /* For copy_to_user/put_user/... */
-#ifdef CONFIG_USB_DEBUG
-static int debug = 1;
-#else
-static int debug;
-#endif
-
-/* Use our own dbg macro */
-
-#undef dbg
-#ifndef DEBUG
-#define DEBUG
-#endif
-#define dbg(format, ...) \
-do { \
- if (debug) \
- pr_debug(format "\n", ##__VA_ARGS__); \
-} while (0)
/* Module and Version Information */
#define DRIVER_VERSION "1.02"
@@ -73,10 +56,6 @@ MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE(DRIVER_LICENSE);
-/* Module Parameters */
-module_param(debug, int, 0);
-MODULE_PARM_DESC(debug, "Debug enabled or not");
-
#define WATCHDOG_HEARTBEAT 0 /* default heartbeat =
delay-time from dip-switches */
static int heartbeat = WATCHDOG_HEARTBEAT;
@@ -193,6 +172,7 @@ static void usb_pcwd_intr_done(struct ur
struct usb_pcwd_private *usb_pcwd =
(struct usb_pcwd_private *)urb->context;
unsigned char *data = usb_pcwd->intr_buffer;
+ struct device *dev = &usb_pcwd->interface->dev;
int retval;
switch (urb->status) {
@@ -202,17 +182,17 @@ static void usb_pcwd_intr_done(struct ur
case -ENOENT:
case -ESHUTDOWN:
/* this urb is terminated, clean up */
- dbg("%s - urb shutting down with status: %d", __func__,
- urb->status);
+ dev_dbg(dev, "%s - urb shutting down with status: %d",
+ __func__, urb->status);
return;
/* -EPIPE: should clear the halt */
default: /* error */
- dbg("%s - nonzero urb status received: %d", __func__,
- urb->status);
+ dev_dbg(dev, "%s - nonzero urb status received: %d",
+ __func__, urb->status);
goto resubmit;
}
- dbg("received following data cmd=0x%02x msb=0x%02x lsb=0x%02x",
+ dev_dbg(dev, "received following data cmd=0x%02x msb=0x%02x lsb=0x%02x",
data[0], data[1], data[2]);
usb_pcwd->cmd_command = data[0];
@@ -251,7 +231,8 @@ static int usb_pcwd_send_command(struct
buf[2] = *lsb; /* Byte 2 = Data LSB */
buf[3] = buf[4] = buf[5] = 0; /* All other bytes not used */
- dbg("sending following data cmd=0x%02x msb=0x%02x lsb=0x%02x",
+ dev_dbg(&usb_pcwd->interface->dev,
+ "sending following data cmd=0x%02x msb=0x%02x lsb=0x%02x",
buf[0], buf[1], buf[2]);
atomic_set(&usb_pcwd->cmd_received, 0);
@@ -260,8 +241,9 @@ static int usb_pcwd_send_command(struct
HID_REQ_SET_REPORT, HID_DT_REPORT,
0x0200, usb_pcwd->interface_number, buf, 6,
USB_COMMAND_TIMEOUT) != 6) {
- dbg("usb_pcwd_send_command: error in usb_control_msg for "
- "cmd 0x%x 0x%x 0x%x\n", cmd, *msb, *lsb);
+ dev_dbg(&usb_pcwd->interface->dev,
+ "usb_pcwd_send_command: error in usb_control_msg for cmd 0x%x 0x%x 0x%x\n",
+ cmd, *msb, *lsb);
}
/* wait till the usb card processed the command,
* with a max. timeout of USB_COMMAND_TIMEOUT */
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
