Hello, Following the fix I submitted a few weeks ago, here is a set of patches that adds USB support for the Ingenic JZ4740 MIPS SoC. The JZ4740 is found in the Ben NanoNote handheld computer which is built by the Qi-Hardware community. Even though Ben NanoNote is already supported in the kernel, we were relying on an out-of-tree gadget driver to make use of the JZ4740 USB Device Controller. The patches that come as a follow-up of this message are an attempt to provide USB support through an musb glue layer. Changes since v2: - usb: musb-jz4740: Add COMPILE_TEST dependency in Kconfig - usb: musb-jz4740: Split drivers/ files from arch/ files Changes since v1: - usb: musb-jz4740: Don't manually free device managed resources - usb: musb-jz4740: Move musb_hdrc_config to the glue driver - usb: musb-jz4740: Move jz4740 specific fifo config to the jz4740 glue - usb: musb-jz4740: Mask host mode only IRQ bits - usb: musb-jz4740: Remove set_vbus callback - usb: musb_gadget: Use is_otg flag to set gadget peripheral mode on reset Changes were rebased on top of Felipe Balbi's USB Subsystem master branch, built and tested on device successfully. The following changes since commit 7c0883d: Merge branch 'next' are available in the git repository at: git://seketeli.fr/~apelete/linux-usb.git musb-jz4740 Apelete Seketeli (2): usb: musb: add support for JZ4740 usb device controller usb: musb: fix setting JZ4740 gadget periphal mode on reset drivers/usb/musb/Kconfig | 8 +- drivers/usb/musb/Makefile | 1 + drivers/usb/musb/jz4740.c | 201 ++++++++++++++++++++++++++++++++++++++++ drivers/usb/musb/musb_gadget.c | 10 +- 4 files changed, 218 insertions(+), 2 deletions(-) create mode 100644 drivers/usb/musb/jz4740.c -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
