Resending the series with suggested minor updates from v3 [1]. Series adds USB host support for Keystone SOCs. Keystone SOCs uses dwc3 hardware IP implementation. On Keystone II platforms, we use no-op phy driver. Patchset are tested on Keystone II EVM with USB2.0 and USB3.0 flash drives along with dts changes. Cc: Felipe Balbi <balbi@xxxxxx> Cc: Santosh Shilimkar <santosh.shilimkar@xxxxxx> WingMan Kwok (2): usb: dwc3: Add Keystone specific glue layer usb: phy: Add keystone usb phy driver drivers/usb/dwc3/Kconfig | 7 ++ drivers/usb/dwc3/Makefile | 1 + drivers/usb/dwc3/dwc3-keystone.c | 201 ++++++++++++++++++++++++++++++++++++++ drivers/usb/phy/Kconfig | 9 ++ drivers/usb/phy/Makefile | 1 + drivers/usb/phy/phy-keystone.c | 142 +++++++++++++++++++++++++++ 6 files changed, 361 insertions(+) create mode 100644 drivers/usb/dwc3/dwc3-keystone.c create mode 100644 drivers/usb/phy/phy-keystone.c [1] http://www.spinics.net/lists/linux-usb/msg99178.html -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
