Re: [PATCH 1/3] usb: phy-generic: Add GPIO based ChipSelect

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Mon, Dec 02, 2013 at 03:05:17PM +0800, Chris Ruehl wrote:
> @@ -231,27 +249,40 @@ static int usb_phy_gen_xceiv_probe(struct platform_device *pdev)
>  		return -ENOMEM;
>  
>  	nop->reset_active_low = true;	/* default behaviour */
> +	nop->cs_active_low = true;
>  
>  	if (dev->of_node) {
>  		struct device_node *node = dev->of_node;
>  		enum of_gpio_flags flags;
> +		enum of_gpio_flags csflags;
>  
>  		if (of_property_read_u32(node, "clock-frequency", &clk_rate))
>  			clk_rate = 0;
>  
>  		needs_vcc = of_property_read_bool(node, "vcc-supply");
> +
>  		nop->gpio_reset = of_get_named_gpio_flags(node, "reset-gpios",
>  								0, &flags);
> +

two unrelated changes

>  		if (nop->gpio_reset == -EPROBE_DEFER)
>  			return -EPROBE_DEFER;
>  
>  		nop->reset_active_low = flags & OF_GPIO_ACTIVE_LOW;
>  
> +		nop->gpio_chipselect = of_get_named_gpio_flags(node, "cs-gpios",
> +								0, &csflags);
> +		if (gpio_is_valid(nop->gpio_chipselect))
> +			nop->cs_active_low = csflags & OF_GPIO_ACTIVE_LOW;
> +
>  	} else if (pdata) {
>  		type = pdata->type;
>  		clk_rate = pdata->clk_rate;
>  		needs_vcc = pdata->needs_vcc;
>  		nop->gpio_reset = pdata->gpio_reset;
> +		nop->gpio_chipselect = pdata->gpio_chipselect;
> +	} else {
> +		nop->gpio_reset = -1;

This line is already going upstream, please remove it, i'll handle the
conflict later.

-- 
balbi

Attachment: signature.asc
Description: Digital signature


[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux