Move omap_usb_config to platform data, so that OTG driver can include it.
Signed-off-by: Aaro Koskinen <aaro.koskinen@xxxxxx>
Acked-by: Tony Lindgren <tony@xxxxxxxxxxx>
---
arch/arm/mach-omap1/include/mach/usb.h | 38 +-----------------------
include/linux/platform_data/usb-omap1.h | 51 +++++++++++++++++++++++++++++++++
2 files changed, 52 insertions(+), 37 deletions(-)
create mode 100644 include/linux/platform_data/usb-omap1.h
diff --git a/arch/arm/mach-omap1/include/mach/usb.h b/arch/arm/mach-omap1/include/mach/usb.h
index 45e5ac707cbb..2c263051dc51 100644
--- a/arch/arm/mach-omap1/include/mach/usb.h
+++ b/arch/arm/mach-omap1/include/mach/usb.h
@@ -8,43 +8,7 @@
#define is_usb0_device(config) 0
#endif
-struct omap_usb_config {
- /* Configure drivers according to the connectors on your board:
- * - "A" connector (rectagular)
- * ... for host/OHCI use, set "register_host".
- * - "B" connector (squarish) or "Mini-B"
- * ... for device/gadget use, set "register_dev".
- * - "Mini-AB" connector (very similar to Mini-B)
- * ... for OTG use as device OR host, initialize "otg"
- */
- unsigned register_host:1;
- unsigned register_dev:1;
- u8 otg; /* port number, 1-based: usb1 == 2 */
-
- u8 hmc_mode;
-
- /* implicitly true if otg: host supports remote wakeup? */
- u8 rwc;
-
- /* signaling pins used to talk to transceiver on usbN:
- * 0 == usbN unused
- * 2 == usb0-only, using internal transceiver
- * 3 == 3 wire bidirectional
- * 4 == 4 wire bidirectional
- * 6 == 6 wire unidirectional (or TLL)
- */
- u8 pins[3];
-
- struct platform_device *udc_device;
- struct platform_device *ohci_device;
- struct platform_device *otg_device;
-
- u32 (*usb0_init)(unsigned nwires, unsigned is_device);
- u32 (*usb1_init)(unsigned nwires);
- u32 (*usb2_init)(unsigned nwires, unsigned alt_pingroup);
-
- int (*ocpi_enable)(void);
-};
+#include <linux/platform_data/usb-omap1.h>
void omap_otg_init(struct omap_usb_config *config);
diff --git a/include/linux/platform_data/usb-omap1.h b/include/linux/platform_data/usb-omap1.h
new file mode 100644
index 000000000000..8c7764ddd284
--- /dev/null
+++ b/include/linux/platform_data/usb-omap1.h
@@ -0,0 +1,51 @@
+/*
+ * Platform data for OMAP1 USB
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive for
+ * more details.
+ */
+#ifndef __LINUX_USB_OMAP1_H
+#define __LINUX_USB_OMAP1_H
+
+#include <linux/platform_device.h>
+
+struct omap_usb_config {
+ /* Configure drivers according to the connectors on your board:
+ * - "A" connector (rectagular)
+ * ... for host/OHCI use, set "register_host".
+ * - "B" connector (squarish) or "Mini-B"
+ * ... for device/gadget use, set "register_dev".
+ * - "Mini-AB" connector (very similar to Mini-B)
+ * ... for OTG use as device OR host, initialize "otg"
+ */
+ unsigned register_host:1;
+ unsigned register_dev:1;
+ u8 otg; /* port number, 1-based: usb1 == 2 */
+
+ u8 hmc_mode;
+
+ /* implicitly true if otg: host supports remote wakeup? */
+ u8 rwc;
+
+ /* signaling pins used to talk to transceiver on usbN:
+ * 0 == usbN unused
+ * 2 == usb0-only, using internal transceiver
+ * 3 == 3 wire bidirectional
+ * 4 == 4 wire bidirectional
+ * 6 == 6 wire unidirectional (or TLL)
+ */
+ u8 pins[3];
+
+ struct platform_device *udc_device;
+ struct platform_device *ohci_device;
+ struct platform_device *otg_device;
+
+ u32 (*usb0_init)(unsigned nwires, unsigned is_device);
+ u32 (*usb1_init)(unsigned nwires);
+ u32 (*usb2_init)(unsigned nwires, unsigned alt_pingroup);
+
+ int (*ocpi_enable)(void);
+};
+
+#endif /* __LINUX_USB_OMAP1_H */
--
1.8.4.4
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
