From: Daniel Tang <dt.tangr@xxxxxxxxx>
The device tree binding chosen for the nspire-usb driver was inappropriate and
should be renamed to lsi,zevio-usb.
References to nspire have been replaced with zevio (the SoC name)
Signed-off-by: Daniel Tang <dt.tangr@xxxxxxxxx>
---
.../devicetree/bindings/usb/ci-hdrc-nspire.txt | 17 -----
.../devicetree/bindings/usb/ci-hdrc-zevio.txt | 17 +++++
drivers/usb/chipidea/Makefile | 2 +-
drivers/usb/chipidea/ci_hdrc_nspire.c | 72 --------------------
drivers/usb/chipidea/ci_hdrc_zevio.c | 72 ++++++++++++++++++++
5 files changed, 90 insertions(+), 90 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/usb/ci-hdrc-nspire.txt
create mode 100644 Documentation/devicetree/bindings/usb/ci-hdrc-zevio.txt
delete mode 100644 drivers/usb/chipidea/ci_hdrc_nspire.c
create mode 100644 drivers/usb/chipidea/ci_hdrc_zevio.c
diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-nspire.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-nspire.txt
deleted file mode 100644
index ef1fcbf..0000000
--- a/Documentation/devicetree/bindings/usb/ci-hdrc-nspire.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-* TI-Nspire USB OTG Controller
-
-Required properties:
-- compatible: Should be "lsi,nspire-usb"
-- reg: Should contain registers location and length
-- interrupts: Should contain controller interrupt
-
-Recommended properies:
-- vbus-supply: regulator for vbus
-
-Examples:
- usb0: usb@B0000000 {
- reg = <0xB0000000 0x1000>;
- compatible = "lsi,nspire-usb";
- interrupts = <8>;
- vbus-supply = <&vbus_reg>;
- };
diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-zevio.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-zevio.txt
new file mode 100644
index 0000000..b6c3b5c
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ci-hdrc-zevio.txt
@@ -0,0 +1,17 @@
+* TI-Nspire USB OTG Controller
+
+Required properties:
+- compatible: Should be "lsi,zevio-usb"
+- reg: Should contain registers location and length
+- interrupts: Should contain controller interrupt
+
+Recommended properies:
+- vbus-supply: regulator for vbus
+
+Examples:
+ usb0: usb@B0000000 {
+ reg = <0xB0000000 0x1000>;
+ compatible = "lsi,zevio-usb";
+ interrupts = <8>;
+ vbus-supply = <&vbus_reg>;
+ };
diff --git a/drivers/usb/chipidea/Makefile b/drivers/usb/chipidea/Makefile
index 245ea4d..7635407 100644
--- a/drivers/usb/chipidea/Makefile
+++ b/drivers/usb/chipidea/Makefile
@@ -10,7 +10,7 @@ ci_hdrc-$(CONFIG_USB_CHIPIDEA_DEBUG) += debug.o
# Glue/Bridge layers go here
obj-$(CONFIG_USB_CHIPIDEA) += ci_hdrc_msm.o
-obj-$(CONFIG_USB_CHIPIDEA) += ci_hdrc_nspire.o
+obj-$(CONFIG_USB_CHIPIDEA) += ci_hdrc_zevio.o
# PCI doesn't provide stubs, need to check
ifneq ($(CONFIG_PCI),)
diff --git a/drivers/usb/chipidea/ci_hdrc_nspire.c b/drivers/usb/chipidea/ci_hdrc_nspire.c
deleted file mode 100644
index c5c2dde..0000000
--- a/drivers/usb/chipidea/ci_hdrc_nspire.c
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * Copyright (C) 2013 Daniel Tang <tangrs@xxxxxxxxxxxx>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2, as
- * published by the Free Software Foundation.
- *
- * Based off drivers/usb/chipidea/ci_hdrc_msm.c
- *
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/usb/gadget.h>
-#include <linux/usb/chipidea.h>
-
-#include "ci.h"
-
-static struct ci_hdrc_platform_data ci_hdrc_nspire_platdata = {
- .name = "ci_hdrc_nspire",
- .flags = CI_HDRC_REGS_SHARED,
- .capoffset = DEF_CAPOFFSET,
-};
-
-static int ci_hdrc_nspire_probe(struct platform_device *pdev)
-{
- struct platform_device *ci_pdev;
-
- dev_dbg(&pdev->dev, "ci_hdrc_nspire_probe\n");
-
- ci_pdev = ci_hdrc_add_device(&pdev->dev,
- pdev->resource, pdev->num_resources,
- &ci_hdrc_nspire_platdata);
-
- if (IS_ERR(ci_pdev)) {
- dev_err(&pdev->dev, "ci_hdrc_add_device failed!\n");
- return PTR_ERR(ci_pdev);
- }
-
- platform_set_drvdata(pdev, ci_pdev);
-
- return 0;
-}
-
-static int ci_hdrc_nspire_remove(struct platform_device *pdev)
-{
- struct platform_device *ci_pdev = platform_get_drvdata(pdev);
-
- ci_hdrc_remove_device(ci_pdev);
-
- return 0;
-}
-
-static const struct of_device_id ci_hdrc_nspire_dt_ids[] = {
- { .compatible = "lsi,nspire-usb", },
- { /* sentinel */ }
-};
-
-static struct platform_driver ci_hdrc_nspire_driver = {
- .probe = ci_hdrc_nspire_probe,
- .remove = ci_hdrc_nspire_remove,
- .driver = {
- .name = "nspire_usb",
- .owner = THIS_MODULE,
- .of_match_table = ci_hdrc_nspire_dt_ids,
- },
-};
-
-MODULE_DEVICE_TABLE(of, ci_hdrc_nspire_dt_ids);
-module_platform_driver(ci_hdrc_nspire_driver);
-
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/chipidea/ci_hdrc_zevio.c b/drivers/usb/chipidea/ci_hdrc_zevio.c
new file mode 100644
index 0000000..3bf6489
--- /dev/null
+++ b/drivers/usb/chipidea/ci_hdrc_zevio.c
@@ -0,0 +1,72 @@
+/*
+ * Copyright (C) 2013 Daniel Tang <tangrs@xxxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ * Based off drivers/usb/chipidea/ci_hdrc_msm.c
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/chipidea.h>
+
+#include "ci.h"
+
+static struct ci_hdrc_platform_data ci_hdrc_zevio_platdata = {
+ .name = "ci_hdrc_zevio",
+ .flags = CI_HDRC_REGS_SHARED,
+ .capoffset = DEF_CAPOFFSET,
+};
+
+static int ci_hdrc_zevio_probe(struct platform_device *pdev)
+{
+ struct platform_device *ci_pdev;
+
+ dev_dbg(&pdev->dev, "ci_hdrc_zevio_probe\n");
+
+ ci_pdev = ci_hdrc_add_device(&pdev->dev,
+ pdev->resource, pdev->num_resources,
+ &ci_hdrc_zevio_platdata);
+
+ if (IS_ERR(ci_pdev)) {
+ dev_err(&pdev->dev, "ci_hdrc_add_device failed!\n");
+ return PTR_ERR(ci_pdev);
+ }
+
+ platform_set_drvdata(pdev, ci_pdev);
+
+ return 0;
+}
+
+static int ci_hdrc_zevio_remove(struct platform_device *pdev)
+{
+ struct platform_device *ci_pdev = platform_get_drvdata(pdev);
+
+ ci_hdrc_remove_device(ci_pdev);
+
+ return 0;
+}
+
+static const struct of_device_id ci_hdrc_zevio_dt_ids[] = {
+ { .compatible = "lsi,zevio-usb", },
+ { /* sentinel */ }
+};
+
+static struct platform_driver ci_hdrc_zevio_driver = {
+ .probe = ci_hdrc_zevio_probe,
+ .remove = ci_hdrc_zevio_remove,
+ .driver = {
+ .name = "zevio_usb",
+ .owner = THIS_MODULE,
+ .of_match_table = ci_hdrc_zevio_dt_ids,
+ },
+};
+
+MODULE_DEVICE_TABLE(of, ci_hdrc_zevio_dt_ids);
+module_platform_driver(ci_hdrc_zevio_driver);
+
+MODULE_LICENSE("GPL v2");
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
