Re: BUG: usb: obex in g_nokia.ko causing kernel panic

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Tue, Nov 26, 2013 at 06:28:05PM +0100, Pali Rohár wrote:

[ snip ]

> > > (above dump is from 3.12-rc5 kernel)
> > 
> > looks like it's trying to do i2c transfers from atomic. But
> > why only when obex is enabled ? Makes no sense. What do you
> > have on userland ? Is there anything trying to access the
> > obex interface ? Was the USB cable attached at that time ?
> 
> Yes, only when initliaizing obex. Other is ok. Problem is there 
> with Maemo userland and also with clean userland (rescueOS) where 
> is only busybox and some simple init scripts. On Maemo maybe 
> something is trying to access obex, but on rescueOS for sure 
> nothing. Problem happends when cable is attached and also when 
> not = always.

As a debug effort, can you apply hack below and see if it "helps" ?

diff --git a/drivers/usb/gadget/f_obex.c b/drivers/usb/gadget/f_obex.c
index ad39f1d..4af2f06 100644
--- a/drivers/usb/gadget/f_obex.c
+++ b/drivers/usb/gadget/f_obex.c
@@ -267,10 +267,12 @@ static void obex_connect(struct gserial *g)
 	if (!obex->can_activate)
 		return;
 
+#if 0
 	status = usb_function_activate(&g->func);
 	if (status)
 		DBG(cdev, "obex ttyGS%d function activate --> %d\n",
 			obex->port_num, status);
+#endif
 }
 
 static void obex_disconnect(struct gserial *g)
@@ -282,10 +284,12 @@ static void obex_disconnect(struct gserial *g)
 	if (!obex->can_activate)
 		return;
 
+#if 0
 	status = usb_function_deactivate(&g->func);
 	if (status)
 		DBG(cdev, "obex ttyGS%d function deactivate --> %d\n",
 			obex->port_num, status);
+#endif
 }
 
 /*-------------------------------------------------------------------------*/
@@ -372,6 +376,7 @@ static int obex_bind(struct usb_configuration *c, struct usb_function *f)
 	if (status)
 		goto fail;
 
+#if 0
 	/* Avoid letting this gadget enumerate until the userspace
 	 * OBEX server is active.
 	 */
@@ -381,6 +386,7 @@ static int obex_bind(struct usb_configuration *c, struct usb_function *f)
 			obex->port_num, status);
 	else
 		obex->can_activate = true;
+#endif
 
 
 	DBG(cdev, "obex ttyGS%d: %s speed IN/%s OUT/%s\n",

-- 
balbi

Attachment: signature.asc
Description: Digital signature


[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux