On 26 November 2013 00:10, Rafael J. Wysocki <rjw@xxxxxxxxxxxxx> wrote:
> On Monday, November 25, 2013 01:40:21 PM Ulf Hansson wrote:
>> To put devices into low power state during sleep, it sometimes makes
>> sense at subsystem-level to re-use device's runtime PM callbacks.
>>
>> The PM core will at device_suspend_late disable runtime PM, after that
>> we can safely operate on these callbacks. At suspend_late the device
>> will be put into low power state by invoking the device's
>> runtime_suspend callback, unless the runtime status is already
>> suspended. At resume_early the state is restored by invoking the
>> device's runtime_resume callback. Soon after the PM core will re-enable
>> runtime PM before returning from device_resume_early.
>>
>> The new pm_generic functions are named pm_generic_suspend_late_runtime
>> and pm_generic_resume_early_runtime, they are supposed to be used in
>> pairs.
>
> What happens if the subsystem uses the new functions as its late suspend/
> early resume callbacks, but some of its drivers implement .suspend_late()
> and .resume_early()?
Good point. Normally, I think the decision of using these callbacks
should be taken at the lowest level, in other words in the driver.
Otherwise the lowest layer of .suspend_late will be by-passed.
Do you think "subsystem-level" is too vague to indicate that? Should
we say "driver-level" in the functions comment field instead?
>
> Also, these are system suspend/resume callbacks, so the "runtime" part of
> the names is kind of confusing. I have no idea for better naming at this
> point, but still.
Somehow I would like to indicate that it is actually the runtime
callbacks that will be indirectly invoked. Besides that, I would
happily change to whatever you propose. :-)
>
>> Do note that these new generic callbacks will work smothly even with
>> and without CONFIG_PM_RUNTIME, as long as the runtime PM callbacks are
>> implemented inside CONFIG_PM instead of CONFIG_PM_RUNTIME.
>>
>> A special thanks to Alan Stern who came up with this idea.
>>
>> Cc: Kevin Hilman <khilman@xxxxxxxxxx>
>> Cc: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
>> Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
>> ---
>> drivers/base/power/generic_ops.c | 86 ++++++++++++++++++++++++++++++++++++++
>> include/linux/pm.h | 2 +
>> 2 files changed, 88 insertions(+)
>>
>> diff --git a/drivers/base/power/generic_ops.c b/drivers/base/power/generic_ops.c
>> index 5ee030a..3132768 100644
>> --- a/drivers/base/power/generic_ops.c
>> +++ b/drivers/base/power/generic_ops.c
>> @@ -93,6 +93,49 @@ int pm_generic_suspend_late(struct device *dev)
>> EXPORT_SYMBOL_GPL(pm_generic_suspend_late);
>>
>> /**
>> + * pm_generic_suspend_late_runtime - Generic suspend_late callback for
>> + * subsystems that wants to use runtime_suspend callbacks at suspend_late.
>
> This has to be one line. You can add more description below the @dev line.
OK
>
>> + * @dev: Device to suspend.
>> + */
>> +int pm_generic_suspend_late_runtime(struct device *dev)
>> +{
>> + int (*callback)(struct device *);
>> + int ret = 0;
>> +
>> + /*
>> + * PM core has disabled runtime PM in device_suspend_late, thus we can
>> + * safely check the device's runtime status and decide whether
>> + * additional actions are needed to put the device into low power state.
>> + * If so, we invoke the device's runtime_suspend callback.
>> + * For the !CONFIG_PM_RUNTIME case, pm_runtime_status_suspended() always
>> + * returns false and therefore the runtime_suspend callback will be
>> + * invoked.
>> + */
>> + if (pm_runtime_status_suspended(dev))
>> + return 0;
>> +
>> + if (dev->pm_domain)
>> + callback = dev->pm_domain->ops.runtime_suspend;
>> + else if (dev->type && dev->type->pm)
>> + callback = dev->type->pm->runtime_suspend;
>> + else if (dev->class && dev->class->pm)
>> + callback = dev->class->pm->runtime_suspend;
>> + else if (dev->bus && dev->bus->pm)
>> + callback = dev->bus->pm->runtime_suspend;
>> + else
>> + callback = NULL;
>> +
>> + if (!callback && dev->driver && dev->driver->pm)
>> + callback = dev->driver->pm->runtime_suspend;
>> +
>> + if (callback)
>> + ret = callback(dev);
>> +
>> + return ret;
>> +}
>> +EXPORT_SYMBOL_GPL(pm_generic_suspend_late_runtime);
>> +
>> +/**
>> * pm_generic_suspend - Generic suspend callback for subsystems.
>> * @dev: Device to suspend.
>> */
>> @@ -237,6 +280,49 @@ int pm_generic_resume_early(struct device *dev)
>> EXPORT_SYMBOL_GPL(pm_generic_resume_early);
>>
>> /**
>> + * pm_generic_resume_early_runtime - Generic resume_early callback for
>> + * subsystems that wants to use runtime_resume callbacks at resume_early.
>
> Same here.
OK
>
>> + * @dev: Device to resume.
>> + */
>> +int pm_generic_resume_early_runtime(struct device *dev)
>> +{
>> + int (*callback)(struct device *);
>> + int ret = 0;
>> +
>> + /*
>> + * PM core has not yet enabled runtime PM in device_resume_early,
>> + * thus we can safely check the device's runtime status and restore the
>> + * previous state we had in device_suspend_late. If restore is needed
>> + * we invoke the device's runtime_resume callback.
>> + * For the !CONFIG_PM_RUNTIME case, pm_runtime_status_suspended() always
>> + * returns false and therefore the runtime_resume callback will be
>> + * invoked.
>> + */
>> + if (pm_runtime_status_suspended(dev))
>> + return 0;
>> +
>> + if (dev->pm_domain)
>> + callback = dev->pm_domain->ops.runtime_resume;
>> + else if (dev->type && dev->type->pm)
>> + callback = dev->type->pm->runtime_resume;
>> + else if (dev->class && dev->class->pm)
>> + callback = dev->class->pm->runtime_resume;
>> + else if (dev->bus && dev->bus->pm)
>> + callback = dev->bus->pm->runtime_resume;
>> + else
>> + callback = NULL;
>> +
>> + if (!callback && dev->driver && dev->driver->pm)
>> + callback = dev->driver->pm->runtime_resume;
>> +
>> + if (callback)
>> + ret = callback(dev);
>> +
>> + return ret;
>> +}
>> +EXPORT_SYMBOL_GPL(pm_generic_resume_early_runtime);
>> +
>> +/**
>> * pm_generic_resume - Generic resume callback for subsystems.
>> * @dev: Device to resume.
>> */
>> diff --git a/include/linux/pm.h b/include/linux/pm.h
>> index a224c7f..5bce0d4 100644
>> --- a/include/linux/pm.h
>> +++ b/include/linux/pm.h
>> @@ -656,9 +656,11 @@ extern void dpm_for_each_dev(void *data, void (*fn)(struct device *, void *));
>>
>> extern int pm_generic_prepare(struct device *dev);
>> extern int pm_generic_suspend_late(struct device *dev);
>> +extern int pm_generic_suspend_late_runtime(struct device *dev);
>> extern int pm_generic_suspend_noirq(struct device *dev);
>> extern int pm_generic_suspend(struct device *dev);
>> extern int pm_generic_resume_early(struct device *dev);
>> +extern int pm_generic_resume_early_runtime(struct device *dev);
>> extern int pm_generic_resume_noirq(struct device *dev);
>> extern int pm_generic_resume(struct device *dev);
>> extern int pm_generic_freeze_noirq(struct device *dev);
>
Thanks for the comments, I will submit a new version soon.
Kind regards
Ulf Hansson
> Thanks!
>
> --
> I speak only for myself.
> Rafael J. Wysocki, Intel Open Source Technology Center.
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
