If the GRSTCTL_CSFTRST self-clearing bit never comes back to 0 for any reason, the controller is under reset state and cannot be used. It's preferable to abort initialization in such case. Signed-off-by: Julien Delacou <julien.delacou@xxxxxx> --- drivers/staging/dwc2/core.c | 58 +++++++++++++++++++++++++++++++++---------- 1 file changed, 45 insertions(+), 13 deletions(-) diff --git a/drivers/staging/dwc2/core.c b/drivers/staging/dwc2/core.c index 27e1964..ecce1ef 100644 --- a/drivers/staging/dwc2/core.c +++ b/drivers/staging/dwc2/core.c @@ -116,7 +116,7 @@ static void dwc2_init_fs_ls_pclk_sel(struct dwc2_hsotg *hsotg) * Do core a soft reset of the core. Be careful with this because it * resets all the internal state machines of the core. */ -static void dwc2_core_reset(struct dwc2_hsotg *hsotg) +static int dwc2_core_reset(struct dwc2_hsotg *hsotg) { u32 greset; int count = 0; @@ -131,7 +131,7 @@ static void dwc2_core_reset(struct dwc2_hsotg *hsotg) dev_warn(hsotg->dev, "%s() HANG! AHB Idle GRSTCTL=%0x\n", __func__, greset); - return; + return -EBUSY; } } while (!(greset & GRSTCTL_AHBIDLE)); @@ -146,7 +146,7 @@ static void dwc2_core_reset(struct dwc2_hsotg *hsotg) dev_warn(hsotg->dev, "%s() HANG! Soft Reset GRSTCTL=%0x\n", __func__, greset); - break; + return -EBUSY; } } while (greset & GRSTCTL_CSFTRST); @@ -155,11 +155,14 @@ static void dwc2_core_reset(struct dwc2_hsotg *hsotg) * not stay in host mode after a connector ID change! */ usleep_range(150000, 200000); + + return 0; } -static void dwc2_fs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy) +static int dwc2_fs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy) { u32 usbcfg, i2cctl; + int retval = 0; /* * core_init() is now called on every switch so only call the @@ -172,7 +175,12 @@ static void dwc2_fs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy) writel(usbcfg, hsotg->regs + GUSBCFG); /* Reset after a PHY select */ - dwc2_core_reset(hsotg); + retval = dwc2_core_reset(hsotg); + if (retval) { + dev_err(hsotg->dev, "%s() Reset failed, aborting", + __func__); + return retval; + } } /* @@ -200,14 +208,17 @@ static void dwc2_fs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy) i2cctl |= GI2CCTL_I2CEN; writel(i2cctl, hsotg->regs + GI2CCTL); } + + return retval; } -static void dwc2_hs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy) +static int dwc2_hs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy) { u32 usbcfg; + int retval = 0; if (!select_phy) - return; + return -ENODEV; usbcfg = readl(hsotg->regs + GUSBCFG); @@ -240,20 +251,32 @@ static void dwc2_hs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy) writel(usbcfg, hsotg->regs + GUSBCFG); /* Reset after setting the PHY parameters */ - dwc2_core_reset(hsotg); + retval = dwc2_core_reset(hsotg); + if (retval) { + dev_err(hsotg->dev, "%s() Reset failed, aborting", + __func__); + return retval; + } + + return retval; } -static void dwc2_phy_init(struct dwc2_hsotg *hsotg, bool select_phy) +static int dwc2_phy_init(struct dwc2_hsotg *hsotg, bool select_phy) { u32 usbcfg; + int retval = 0; if (hsotg->core_params->speed == DWC2_SPEED_PARAM_FULL && hsotg->core_params->phy_type == DWC2_PHY_TYPE_PARAM_FS) { /* If FS mode with FS PHY */ - dwc2_fs_phy_init(hsotg, select_phy); + retval = dwc2_fs_phy_init(hsotg, select_phy); + if (retval) + return retval; } else { /* High speed PHY */ - dwc2_hs_phy_init(hsotg, select_phy); + retval = dwc2_hs_phy_init(hsotg, select_phy); + if (retval) + return retval; } if (hsotg->hw_params.hs_phy_type == GHWCFG2_HS_PHY_TYPE_ULPI && @@ -270,6 +293,8 @@ static void dwc2_phy_init(struct dwc2_hsotg *hsotg, bool select_phy) usbcfg &= ~GUSBCFG_ULPI_CLK_SUSP_M; writel(usbcfg, hsotg->regs + GUSBCFG); } + + return retval; } static int dwc2_gahbcfg_init(struct dwc2_hsotg *hsotg) @@ -421,12 +446,19 @@ int dwc2_core_init(struct dwc2_hsotg *hsotg, bool select_phy, int irq) writel(usbcfg, hsotg->regs + GUSBCFG); /* Reset the Controller */ - dwc2_core_reset(hsotg); + retval = dwc2_core_reset(hsotg); + if (retval) { + dev_err(hsotg->dev, "%s(): Reset failed, aborting\n", + __func__); + return retval; + } /* * This needs to happen in FS mode before any other programming occurs */ - dwc2_phy_init(hsotg, select_phy); + retval = dwc2_phy_init(hsotg, select_phy); + if (retval) + return retval; /* Program the GAHBCFG Register */ retval = dwc2_gahbcfg_init(hsotg); -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html