Falling back from uas to usb-storage requires coordination between uas and usb-storage, so use usb-storage's quirks module parameter, rather then requiring the user to pass a param to 2 different modules. Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx> --- drivers/usb/storage/Kconfig | 2 +- drivers/usb/storage/uas-detect.h | 4 ++++ 2 files changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig index 8470e1b..5939570 100644 --- a/drivers/usb/storage/Kconfig +++ b/drivers/usb/storage/Kconfig @@ -202,7 +202,7 @@ config USB_STORAGE_ENE_UB6250 config USB_UAS tristate "USB Attached SCSI" - depends on SCSI && BROKEN + depends on SCSI && USB_STORAGE && BROKEN help The USB Attached SCSI protocol is supported by some USB storage devices. It permits higher performance by supporting diff --git a/drivers/usb/storage/uas-detect.h b/drivers/usb/storage/uas-detect.h index 02bf5ec..082bde1 100644 --- a/drivers/usb/storage/uas-detect.h +++ b/drivers/usb/storage/uas-detect.h @@ -1,5 +1,6 @@ #include <linux/usb.h> #include <linux/usb/hcd.h> +#include "usb.h" static int uas_is_interface(struct usb_host_interface *intf) { @@ -42,8 +43,11 @@ static int uas_find_uas_alt_setting(struct usb_interface *intf) static int uas_use_uas_driver(struct usb_interface *intf, const struct usb_device_id *id) { + struct usb_device *udev = interface_to_usbdev(intf); unsigned long flags = id->driver_info; + usb_stor_adjust_quirks(udev, &flags); + if (flags & US_FL_IGNORE_UAS) return 0; -- 1.8.4.2 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html