On Tue, Nov 12, 2013 at 09:15:18AM +0800, Peter Chen wrote: > On Mon, Nov 11, 2013 at 10:32:51PM +0100, Marc Kleine-Budde wrote: > > On 10/30/2013 04:06 AM, Peter Chen wrote: > > > According to Freescale imx28 Errata, "ENGR119653 USB: ARM to USB > > > register error issue", All USB register write operations must > > > use the ARM SWP instruction. So, we implement a special ehci_write > > > for imx28. > > > > > > Discussion for it at below: > > > http://marc.info/?l=linux-usb&m=137996395529294&w=2 > > > > > > Signed-off-by: Peter Chen <peter.chen@xxxxxxxxxxxxx> > > > Acked-by: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx> > > > --- > > > drivers/usb/host/ehci.h | 13 +++++++++++++ > > > 1 files changed, 13 insertions(+), 0 deletions(-) > > > > > > diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h > > > index e8f41c5..535aa8b 100644 > > > --- a/drivers/usb/host/ehci.h > > > +++ b/drivers/usb/host/ehci.h > > > @@ -225,6 +225,7 @@ struct ehci_hcd { /* one per controller */ > > > unsigned has_synopsys_hc_bug:1; /* Synopsys HC */ > > > unsigned frame_index_bug:1; /* MosChip (AKA NetMos) */ > > > unsigned need_oc_pp_cycle:1; /* MPC834X port power */ > > > + unsigned imx28_write_fix:1; /* For Freescale i.MX28 */ > > > > > > /* required for usb32 quirk */ > > > #define OHCI_CTRL_HCFS (3 << 6) > > > @@ -728,6 +729,13 @@ static inline unsigned int ehci_readl(const struct ehci_hcd *ehci, > > > #endif > > > } > > > > > > +#ifdef CONFIG_SOC_IMX28 > > > +static inline void imx28_ehci_writel(u32 val32, volatile u32 *addr) > > > > You should annotate the addr pointer with __iomem, or better use the > > signature of ehci_writel(): > > > > static inline void imx28_ehci_writel(const unsinged int val32, __u32 > > __iomem *addr) > > > > I agree, but volatile is needed as it needs to read/write from io address. Then the code is wrong, please fix it. -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
