On Sun, Nov 03, 2013 at 11:09:50PM +0100, Colin Leitner wrote:
> This patch fixes the CS5 setting on the PL2303 USB-to-serial devices. CS5 has a
> value of 0 and the CSIZE setting has been skipped altogether by the enclosing
> if. Tested on 3.11.6 and the scope shows the correct output after the fix has
> been applied.
>
> Tagged to be added to stable, because it fixes a user visible driver bug and is
> simple enough to backport easily.
>
> Cc: stable@xxxxxxxxxxxxxxx
> Signed-off-by: Colin Leitner <colin.leitner@xxxxxxxxx>
Looks good now, but I'm afraid it doesn't apply to v3.12. There were
some last minute reverts in v3.12 which could possibly explain that.
Care to rebase against v3.12 and send a v2 (v3?)?
Thanks,
Johan
> ---
> drivers/usb/serial/pl2303.c | 30 ++++++++++++++----------------
> 1 file changed, 14 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
> index bedf8e4..fd86357 100644
> --- a/drivers/usb/serial/pl2303.c
> +++ b/drivers/usb/serial/pl2303.c
> @@ -522,23 +522,21 @@ static void pl2303_set_termios(struct tty_struct *tty,
> 0, 0, buf, 7, 100);
> dev_dbg(&port->dev, "0xa1:0x21:0:0 %d - %7ph\n", i, buf);
>
> - if (C_CSIZE(tty)) {
> - switch (C_CSIZE(tty)) {
> - case CS5:
> - buf[6] = 5;
> - break;
> - case CS6:
> - buf[6] = 6;
> - break;
> - case CS7:
> - buf[6] = 7;
> - break;
> - default:
> - case CS8:
> - buf[6] = 8;
> - }
> - dev_dbg(&port->dev, "data bits = %d\n", buf[6]);
> + switch (C_CSIZE(tty)) {
> + case CS5:
> + buf[6] = 5;
> + break;
> + case CS6:
> + buf[6] = 6;
> + break;
> + case CS7:
> + buf[6] = 7;
> + break;
> + default:
> + case CS8:
> + buf[6] = 8;
> }
> + dev_dbg(&port->dev, "data bits = %d\n", buf[6]);
>
> /* For reference: buf[0]:buf[3] baud rate value */
> pl2303_encode_baudrate(tty, port, spriv->type, buf);
> --
> 1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
