[PATCH net-next 08/24] net: cdc_ncm: remove ncm_parm field

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Moving the call to cdc_ncm_setup() after the endpoint
setup removes the last remaining reference to ncm_parm
outside cdc_ncm_setup.

Collecting all the ncm_parm based calculations in
cdc_ncm_setup improves readability.

Cc: Alexey Orishko <alexey.orishko@xxxxxxxxx>
Signed-off-by: Bjørn Mork <bjorn@xxxxxxx>
---
 drivers/net/usb/cdc_ncm.c   |   46 +++++++++++++++++++++----------------------
 include/linux/usb/cdc_ncm.h |    1 -
 2 files changed, 23 insertions(+), 24 deletions(-)

diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c
index fc36a99..4de3a542 100644
--- a/drivers/net/usb/cdc_ncm.c
+++ b/drivers/net/usb/cdc_ncm.c
@@ -83,6 +83,7 @@ cdc_ncm_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *info)
 static u8 cdc_ncm_setup(struct usbnet *dev)
 {
 	struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0];
+	struct usb_cdc_ncm_ntb_parameters ncm_parm;
 	u32 val;
 	u8 flags;
 	u8 iface_no;
@@ -97,22 +98,22 @@ static u8 cdc_ncm_setup(struct usbnet *dev)
 	err = usbnet_read_cmd(dev, USB_CDC_GET_NTB_PARAMETERS,
 			      USB_TYPE_CLASS | USB_DIR_IN
 			      |USB_RECIP_INTERFACE,
-			      0, iface_no, &ctx->ncm_parm,
-			      sizeof(ctx->ncm_parm));
+			      0, iface_no, &ncm_parm,
+			      sizeof(ncm_parm));
 	if (err < 0) {
 		pr_debug("failed GET_NTB_PARAMETERS\n");
 		return 1;
 	}
 
 	/* read correct set of parameters according to device mode */
-	ctx->rx_max = le32_to_cpu(ctx->ncm_parm.dwNtbInMaxSize);
-	ctx->tx_max = le32_to_cpu(ctx->ncm_parm.dwNtbOutMaxSize);
-	ctx->tx_remainder = le16_to_cpu(ctx->ncm_parm.wNdpOutPayloadRemainder);
-	ctx->tx_modulus = le16_to_cpu(ctx->ncm_parm.wNdpOutDivisor);
-	ctx->tx_ndp_modulus = le16_to_cpu(ctx->ncm_parm.wNdpOutAlignment);
+	ctx->rx_max = le32_to_cpu(ncm_parm.dwNtbInMaxSize);
+	ctx->tx_max = le32_to_cpu(ncm_parm.dwNtbOutMaxSize);
+	ctx->tx_remainder = le16_to_cpu(ncm_parm.wNdpOutPayloadRemainder);
+	ctx->tx_modulus = le16_to_cpu(ncm_parm.wNdpOutDivisor);
+	ctx->tx_ndp_modulus = le16_to_cpu(ncm_parm.wNdpOutAlignment);
 	/* devices prior to NCM Errata shall set this field to zero */
-	ctx->tx_max_datagrams = le16_to_cpu(ctx->ncm_parm.wNtbOutMaxDatagrams);
-	ntb_fmt_supported = le16_to_cpu(ctx->ncm_parm.bmNtbFormatsSupported);
+	ctx->tx_max_datagrams = le16_to_cpu(ncm_parm.wNtbOutMaxDatagrams);
+	ntb_fmt_supported = le16_to_cpu(ncm_parm.bmNtbFormatsSupported);
 
 	eth_hlen = ETH_HLEN;
 	min_dgram_size = CDC_NCM_MIN_DATAGRAM_SIZE;
@@ -153,7 +154,7 @@ static u8 cdc_ncm_setup(struct usbnet *dev)
 	}
 
 	/* inform device about NTB input size changes */
-	if (ctx->rx_max != le32_to_cpu(ctx->ncm_parm.dwNtbInMaxSize)) {
+	if (ctx->rx_max != le32_to_cpu(ncm_parm.dwNtbInMaxSize)) {
 		__le32 dwNtbInMaxSize = cpu_to_le32(ctx->rx_max);
 
 		err = usbnet_write_cmd(dev, USB_CDC_SET_NTB_INPUT_SIZE,
@@ -171,6 +172,14 @@ static u8 cdc_ncm_setup(struct usbnet *dev)
 		pr_debug("Using default maximum transmit length=%d\n",
 						CDC_NCM_NTB_MAX_SIZE_TX);
 		ctx->tx_max = CDC_NCM_NTB_MAX_SIZE_TX;
+
+		/* Adding a pad byte here simplifies the handling in
+		 * cdc_ncm_fill_tx_frame, by making tx_max always
+		 * represent the real skb max size.
+		 */
+		if (ctx->tx_max % usb_maxpacket(dev->udev, dev->out, 1) == 0)
+			ctx->tx_max++;
+
 	}
 
 	/*
@@ -473,10 +482,6 @@ advance:
 	if (temp)
 		goto error2;
 
-	/* initialize data interface */
-	if (cdc_ncm_setup(dev))
-		goto error2;
-
 	/* configure data interface */
 	temp = usb_set_interface(dev->udev, iface_no, data_altsetting);
 	if (temp)
@@ -487,6 +492,10 @@ advance:
 	if (!dev->in || !dev->out || !dev->status)
 		goto error2;
 
+	/* initialize data interface */
+	if (cdc_ncm_setup(dev))
+		goto error2;
+
 	dev->net->ethtool_ops = &cdc_ncm_ethtool_ops;
 
 	usb_set_intfdata(ctx->data, dev);
@@ -501,15 +510,6 @@ advance:
 
 	dev->rx_urb_size = ctx->rx_max;
 
-	/* cdc_ncm_setup will override dwNtbOutMaxSize if it is
-	 * outside the sane range. Adding a pad byte here if necessary
-	 * simplifies the handling in cdc_ncm_fill_tx_frame, making
-	 * tx_max always represent the real skb max size.
-	 */
-	if (ctx->tx_max != le32_to_cpu(ctx->ncm_parm.dwNtbOutMaxSize) &&
-	    ctx->tx_max % usb_maxpacket(dev->udev, dev->out, 1) == 0)
-		ctx->tx_max++;
-
 	return 0;
 
 error2:
diff --git a/include/linux/usb/cdc_ncm.h b/include/linux/usb/cdc_ncm.h
index f14af3d..89b52a0 100644
--- a/include/linux/usb/cdc_ncm.h
+++ b/include/linux/usb/cdc_ncm.h
@@ -88,7 +88,6 @@
 #define cdc_ncm_data_intf_is_mbim(x)  ((x)->desc.bInterfaceProtocol == USB_CDC_MBIM_PROTO_NTB)
 
 struct cdc_ncm_ctx {
-	struct usb_cdc_ncm_ntb_parameters ncm_parm;
 	struct hrtimer tx_timer;
 	struct tasklet_struct bh;
 
-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux