On Wed, Oct 30, 2013 at 11:19:12AM -0400, Alan Stern wrote: > On Wed, 30 Oct 2013, Peter Chen wrote: > > > Individual controller driver has different requirement for wakeup > > setting, so move it from core to itself. In order to align with > > current etting the default wakeup setting is enabled (except for > > chipidea host). > > > > Pass compile test with below commands: > > make O=outout/all allmodconfig > > make -j$CPU_NUM O=outout/all drivers/usb > > > > Signed-off-by: Peter Chen <peter.chen@xxxxxxxxxxxxx> > > --- > > drivers/usb/c67x00/c67x00-hcd.c | 1 + > > drivers/usb/core/hcd-pci.c | 2 ++ > > drivers/usb/core/hcd.c | 6 ------ > > drivers/usb/gadget/dummy_hcd.c | 2 ++ > > drivers/usb/host/ehci-atmel.c | 1 + > > drivers/usb/host/ehci-exynos.c | 1 + > > drivers/usb/host/ehci-fsl.c | 1 + > > drivers/usb/host/ehci-grlib.c | 1 + > > drivers/usb/host/ehci-mv.c | 1 + > > drivers/usb/host/ehci-mxc.c | 1 + > > drivers/usb/host/ehci-octeon.c | 1 + > > drivers/usb/host/ehci-omap.c | 1 + > > drivers/usb/host/ehci-orion.c | 1 + > > drivers/usb/host/ehci-platform.c | 1 + > > drivers/usb/host/ehci-pmcmsp.c | 4 +++- > > drivers/usb/host/ehci-ppc-of.c | 1 + > > drivers/usb/host/ehci-ps3.c | 1 + > > drivers/usb/host/ehci-sead3.c | 1 + > > drivers/usb/host/ehci-sh.c | 1 + > > drivers/usb/host/ehci-spear.c | 1 + > > drivers/usb/host/ehci-tegra.c | 1 + > > drivers/usb/host/ehci-tilegx.c | 1 + > > drivers/usb/host/ehci-w90x900.c | 1 + > > drivers/usb/host/ehci-xilinx-of.c | 4 +++- > > drivers/usb/host/fhci-hcd.c | 1 + > > drivers/usb/host/fotg210-hcd.c | 1 + > > drivers/usb/host/fusbh200-hcd.c | 1 + > > drivers/usb/host/hwa-hc.c | 1 + > > drivers/usb/host/imx21-hcd.c | 1 + > > drivers/usb/host/isp116x-hcd.c | 1 + > > drivers/usb/host/isp1362-hcd.c | 1 + > > drivers/usb/host/isp1760-hcd.c | 1 + > > drivers/usb/host/ohci-at91.c | 4 +++- > > drivers/usb/host/ohci-da8xx.c | 2 ++ > > drivers/usb/host/ohci-exynos.c | 1 + > > drivers/usb/host/ohci-jz4740.c | 1 + > > drivers/usb/host/ohci-nxp.c | 4 +++- > > drivers/usb/host/ohci-octeon.c | 1 + > > drivers/usb/host/ohci-omap.c | 1 + > > drivers/usb/host/ohci-omap3.c | 1 + > > drivers/usb/host/ohci-platform.c | 1 + > > drivers/usb/host/ohci-ppc-of.c | 4 +++- > > drivers/usb/host/ohci-ps3.c | 1 + > > drivers/usb/host/ohci-pxa27x.c | 4 +++- > > drivers/usb/host/ohci-s3c2410.c | 1 + > > drivers/usb/host/ohci-sa1111.c | 4 +++- > > drivers/usb/host/ohci-sm501.c | 1 + > > drivers/usb/host/ohci-spear.c | 4 +++- > > drivers/usb/host/ohci-tilegx.c | 1 + > > drivers/usb/host/ohci-tmio.c | 1 + > > drivers/usb/host/oxu210hp-hcd.c | 1 + > > drivers/usb/host/r8a66597-hcd.c | 1 + > > drivers/usb/host/sl811-hcd.c | 1 + > > drivers/usb/host/u132-hcd.c | 1 + > > drivers/usb/host/uhci-grlib.c | 1 + > > drivers/usb/host/uhci-platform.c | 1 + > > drivers/usb/host/whci/hcd.c | 1 + > > drivers/usb/host/xhci-pci.c | 1 + > > drivers/usb/host/xhci-plat.c | 2 ++ > > drivers/usb/musb/musb_host.c | 1 + > > drivers/usb/phy/phy-msm-usb.c | 1 + > > drivers/usb/phy/phy-mv-usb.c | 6 ++++-- > > drivers/usb/renesas_usbhs/mod_host.c | 1 + > > 63 files changed, 85 insertions(+), 16 deletions(-) > > You missed a few under drivers/staging and drivers/usb/wusbcore. > > Also, it isn't necessary to add the call to dummy-hcd.c. The > controller in dummy-hcd is merely an emulated device, so it's not > capable of generating wakeup events. > > Alan Stern > > drivers/usb/wusbcore driver has not called usb_add_hcd Will change others, and send v2. -- Best Regards, Peter Chen -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
