In Test 9 of usbtest module, it is used for performing chapter 9 tests N times. SuperSpeed USB Device Capability descriptor is one of the generic device-level capbility descriptors which added in section 9.6.2.2 of USB 3.0 spec. This patch adds to support getting SuperSpeed USB Device Capability descriptor test scenario for USB 3.0. Signed-off-by: Huang Rui <ray.huang@xxxxxxx> --- drivers/usb/misc/usbtest.c | 35 +++++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c index 4c797ce..9b99a42 100644 --- a/drivers/usb/misc/usbtest.c +++ b/drivers/usb/misc/usbtest.c @@ -628,6 +628,35 @@ static int is_good_ext(struct usbtest_dev *tdev) return 1; } +static int is_good_ss_cap(struct usbtest_dev *tdev) +{ + struct usb_ss_cap_descriptor *ss; + + ss = (struct usb_ss_cap_descriptor *) tdev->buf; + + if (ss->bLength != USB_DT_USB_SS_CAP_SIZE) { + ERROR(tdev, "bogus superspeed device capability descriptor length\n"); + return 0; + } + + /* + * only bit[1] of bmAttributes is used for LTM and others are + * reserved + */ + if (ss->bmAttributes & ~0x02) { /* reserved == 0 */ + ERROR(tdev, "reserved bits set in bmAttributes\n"); + return 0; + } + + /* bits[0:3] of wSpeedSupported is used and others are reserved */ + if (le16_to_cpu(ss->wSpeedSupported) & ~0x0f) { /* reserved == 0 */ + ERROR(tdev, "reserved bits set in wSpeedSupported\n"); + return 0; + } + + return 1; +} + /* sanity test for standard requests working with usb_control_mesg() and some * of the utility functions which use it. * @@ -762,6 +791,12 @@ static int ch9_postconfig(struct usbtest_dev *dev) return -EDOM; } break; + case USB_SS_CAP_TYPE: + if (!is_good_ss_cap(dev)) { + dev_err(&iface->dev, "bogus superspeed device capability descriptor\n"); + return -EDOM; + } + break; default: break; } -- 1.7.11.7 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html