Hi Alan, USB storage maybe just has to say that the abort occurred. By setting the US_FLIDX_TIMED_OUT bit USB storage is getting signaled that the reason was time out and the command is being aborted. Now, it's arguable whether to change the implication of US_FLIDX_TIMED_OUT bit for scsi - USB storage bridge or for entire usb storage Or maybe scsi has decided to abort so it should override the result. Regards, Vishal -----Original Message----- From: Alan Stern [mailto:stern@xxxxxxxxxxxxxxxxxxx] Sent: Tuesday, October 15, 2013 7:03 PM To: Vishal Annapurve Cc: Ming Lei; Linux Kernel Mailing List; linux-usb Subject: RE: [PATCH] usb-storage: scsiglue: Changing the command result On Tue, 15 Oct 2013, Vishal Annapurve wrote: > Hi Alan, > > This issue seems more related to the devices using SCSI protocol and > the changes otherwise will be at more places giving the same end result. > > I think as the comment says over the command_abort function, > intentional result change should only happen in case of timeout. usb-storage doesn't know _why_ a command was aborted; it knows only that the abort occurred. If you look carefully at the code, you'll see that the result is set to DID_ABORT only when the US_FLIDX_TIMED_OUT bit is set, and this bit gets set only when a SCSI abort occurs. Alan Stern -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html