Le 15/10/2013 11:48, Mylene Josserand a écrit : > Unfortunately, I don't know if I missed any configurations but the SMSC > 3340 is still not working in my case.. :( > > I test it with a 2.6.32 kernel. The phy seems to be detected (same thing > before the "patches") but when I plug an USB-key, no reaction in the kernel. ah ! I was wrong, in fact, the OTG port did not react but the H2 reacts with an USB key : usb 1-1: new low speed USB device using mxc-ehci and address 2 usb 1-1: device descriptor read/64, error -71 usb 1-1: device descriptor read/64, error -71 usb 1-1: new low speed USB device using mxc-ehci and address 3 usb 1-1: device descriptor read/64, error -71 usb 1-1: device descriptor read/64, error -71 usb 1-1: new low speed USB device using mxc-ehci and address 4 usb 1-1: device not accepting address 4, error -71 usb 1-1: new low speed USB device using mxc-ehci and address 5 usb 1-1: device not accepting address 5, error -71 hub 1-0:1.0: unable to enumerate USB device on port 1 What is the code error -71 ? In this thread (https://bbs.archlinux.org/viewtopic.php?id=149708), seems to be a EPROTO error. Is it right ? What is it due to ? -- Mylène JOSSERAND ��.n��������+%������w��{.n�����{���)�� jg��� �����ݢj����G���� ���j:+v���w�m������w�������h�����٥
