Dear Peter Chen, > This property is used to disconnect line between USB PHY and > USB controller. > > Signed-off-by: Peter Chen <peter.chen@xxxxxxxxxxxxx> > --- > Documentation/devicetree/bindings/usb/mxs-phy.txt | 4 ++++ > 1 files changed, 4 insertions(+), 0 deletions(-) > > diff --git a/Documentation/devicetree/bindings/usb/mxs-phy.txt > b/Documentation/devicetree/bindings/usb/mxs-phy.txt index 1a9bd85..099b0bb > 100644 > --- a/Documentation/devicetree/bindings/usb/mxs-phy.txt > +++ b/Documentation/devicetree/bindings/usb/mxs-phy.txt > @@ -5,6 +5,9 @@ Required properties: > - reg: Should contain registers location and length > - interrupts: Should contain phy interrupt > - fsl,anatop: phandle for anatop register > +- disconnect_line_without_vbus: needs to disconnect > +connection between USB PHY and controller, it can avoid > +unexpected wakeup interrupt when the PHY is out of power Uh oh, this might needs some rewording. I didn't understand the reason for this prop before I checked the 12/12 patch. Best regards, Marek Vasut -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html