Hi,
On Mon, Oct 07, 2013 at 06:12:30AM -0400, Matt Porter wrote:
> Broadcom BCM281xx parts have a PHY control block that
> operates in conjunction with the DWC2 USB OTG. This driver
> exposes an API that allows control of power/reset for a
> connected USB PHY.
>
> Signed-off-by: Matt Porter <matt.porter@xxxxxxxxxx>
> Reviewed-by: Markus Mayer <markus.mayer@xxxxxxxxxx>
> Reviewed-by: Tim Kryger <tim.kryger@xxxxxxxxxx>
> ---
> .../devicetree/bindings/usb/bcm-kona-usb-ctrl.txt | 12 ++
> drivers/usb/phy/Kconfig | 5 +
> drivers/usb/phy/Makefile | 1 +
> drivers/usb/phy/bcm-kona-usb.h | 31 +++++
> drivers/usb/phy/phy-bcm-kona-ctrl.c | 151 +++++++++++++++++++++
> 5 files changed, 200 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/usb/bcm-kona-usb-ctrl.txt
> create mode 100644 drivers/usb/phy/bcm-kona-usb.h
> create mode 100644 drivers/usb/phy/phy-bcm-kona-ctrl.c
>
> diff --git a/Documentation/devicetree/bindings/usb/bcm-kona-usb-ctrl.txt b/Documentation/devicetree/bindings/usb/bcm-kona-usb-ctrl.txt
> new file mode 100644
> index 0000000..98163f6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/bcm-kona-usb-ctrl.txt
> @@ -0,0 +1,12 @@
> +BROADCOM KONA USB CONTROL
> +
> +Required properties:
> + - compatible: brcm,kona-ctrl-usb
> + - reg: offset and length of the USB control registers
> +
> +Example:
> +
> + usbctl: usbctl@3f130000 {
> + compatible = "brcm,kona-ctrl-usb";
> + reg = <0x3f130000 0x28>;
> + };
> diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
> index d5589f9..2b7b4f1 100644
> --- a/drivers/usb/phy/Kconfig
> +++ b/drivers/usb/phy/Kconfig
> @@ -100,6 +100,11 @@ config AM335X_PHY_USB
> This driver provides PHY support for that phy which part for the
> AM335x SoC.
>
> +config BCM_KONA_CTRL_USB
> + tristate
> + help
> + Enable this to support the Broadcom Kona USB control block
> +
> config SAMSUNG_USBPHY
> tristate
> help
> diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
> index 2135e85..98c545e 100644
> --- a/drivers/usb/phy/Makefile
> +++ b/drivers/usb/phy/Makefile
> @@ -15,6 +15,7 @@ obj-$(CONFIG_NOP_USB_XCEIV) += phy-generic.o
> obj-$(CONFIG_OMAP_CONTROL_USB) += phy-omap-control.o
> obj-$(CONFIG_AM335X_CONTROL_USB) += phy-am335x-control.o
> obj-$(CONFIG_AM335X_PHY_USB) += phy-am335x.o
> +obj-$(CONFIG_BCM_KONA_CTRL_USB) += phy-bcm-kona-ctrl.o
> obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o
> obj-$(CONFIG_OMAP_USB3) += phy-omap-usb3.o
> obj-$(CONFIG_SAMSUNG_USBPHY) += phy-samsung-usb.o
> diff --git a/drivers/usb/phy/bcm-kona-usb.h b/drivers/usb/phy/bcm-kona-usb.h
> new file mode 100644
> index 0000000..4563dd6
> --- /dev/null
> +++ b/drivers/usb/phy/bcm-kona-usb.h
> @@ -0,0 +1,31 @@
> +/*
> + * bcm_kona_usb.h -- Broadcom Kona USB header file
> + *
> + * Copyright (C) 2013 Linaro Limited
> + * Matt Porter <matt.porter@xxxxxxxxxx>
> + *
> + * This software is licensed under the terms of the GNU General Public
> + * License version 2, as published by the Free Software Foundation, and
> + * may be copied, distributed, and modified under those terms.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#ifndef __BCM_KONA_USB_H
> +#define __BCM_KONA_USB_H
> +
> +#include <linux/usb/phy.h>
> +
> +struct bcm_kona_usb {
> + struct usb_phy phy;
> + struct device *dev;
> + struct device *ctrl_dev;
> +};
> +
> +extern struct device *bcm_kona_get_ctrl_dev(void);
> +extern void bcm_kona_ctrl_usb_phy_power(struct device *, int);
looks like a job for extcon fwk.
> diff --git a/drivers/usb/phy/phy-bcm-kona-ctrl.c b/drivers/usb/phy/phy-bcm-kona-ctrl.c
> new file mode 100644
> index 0000000..d2936b6
> --- /dev/null
> +++ b/drivers/usb/phy/phy-bcm-kona-ctrl.c
> @@ -0,0 +1,151 @@
> +/*
> + * phy-bcm-kona-ctrl.c - Broadcom Kona USB Control Driver
> + *
> + * Based on phy-omap-control.c
> + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
> + * Copyright (C) 2013 Linaro Limited
> + * Matt Porter <matt.porter@xxxxxxxxxx>
> + *
> + * This software is licensed under the terms of the GNU General Public
> + * License version 2, as published by the Free Software Foundation, and
> + * may be copied, distributed, and modified under those terms.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +#include <linux/of.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/clk.h>
> +
> +#include "bcm-kona-usb.h"
> +
> +#define OTGCTL_OTGSTAT2 (1 << 31)
> +#define OTGCTL_OTGSTAT1 (1 << 30)
> +#define OTGCTL_PRST_N_SW (1 << 11)
> +#define OTGCTL_HRESET_N (1 << 10)
> +#define OTGCTL_UTMI_LINE_STATE1 (1 << 9)
> +#define OTGCTL_UTMI_LINE_STATE0 (1 << 8)
> +
> +#define P1CTL_SOFT_RESET (1 << 1)
> +#define P1CTL_NON_DRIVING (1 << 0)
> +
> +struct bcm_kona_usb_ctrl_regs {
> + u32 ctrl;
> + u32 cfg;
> + u32 p1ctl;
> + u32 status;
> + u32 bc_cfg;
> + u32 tp_in;
> + u32 tp_out;
> + u32 phy_ctrl;
> + u32 usbreg;
> + u32 usbproben;
> +};
> +
> +struct bcm_kona_ctrl_usb {
> + struct device *dev;
> + struct bcm_kona_usb_ctrl_regs *regs;
> +};
> +
> +static struct bcm_kona_ctrl_usb *ctrl_usb;
> +
> +/**
> + * bcm_kona_ctrl_dev - returns the device pointer for this control device
> + *
> + * This API should be called to get the device pointer for the Kona USB
> + * control device. This device pointer should be used when calling the
> + * exported bcm_kona_ctrl_usb_phy_power() API.
> + */
> +struct device *bcm_kona_get_ctrl_dev(void)
> +{
> + if (!ctrl_usb)
> + return ERR_PTR(-ENODEV);
> +
> + return ctrl_usb->dev;
> +}
> +EXPORT_SYMBOL_GPL(bcm_kona_get_ctrl_dev);
definitely a job for extcon ;-)
> +void bcm_kona_ctrl_usb_phy_power(struct device *dev, int on)
> +{
> + struct bcm_kona_ctrl_usb *ctrl = dev_get_drvdata(dev);
> + u32 val;
> +
> + val = readl(&ctrl->regs->ctrl);
> + if (on) {
> + /* Configure and power PHY */
> + val &= ~(OTGCTL_OTGSTAT2 | OTGCTL_OTGSTAT1 |
> + OTGCTL_UTMI_LINE_STATE1 | OTGCTL_UTMI_LINE_STATE0);
> + val |= OTGCTL_PRST_N_SW | OTGCTL_HRESET_N;
> + writel(val, &ctrl->regs->ctrl);
> +
> + /* Soft reset PHY */
> + val = readl(&ctrl->regs->p1ctl);
> + val &= ~P1CTL_NON_DRIVING;
> + val |= P1CTL_SOFT_RESET;
> + writel(val, &ctrl->regs->p1ctl);
> + writel(val & ~P1CTL_SOFT_RESET, &ctrl->regs->p1ctl);
> + /* Reset needs to be asserted for 2ms */
> + mdelay(2);
> + writel(val | P1CTL_SOFT_RESET, &ctrl->regs->p1ctl);
> + } else {
> + val &= ~(OTGCTL_PRST_N_SW | OTGCTL_HRESET_N);
> + writel(val, &ctrl->regs->ctrl);
> + }
> +}
> +EXPORT_SYMBOL_GPL(bcm_kona_ctrl_usb_phy_power);
what a hack :-)
Please use phy->init() and phy->exit() callbacks. In fact, please use
Kishon's generic PHY layer.
--
balbi
Attachment:
signature.asc
Description: Digital signature
