This patch fix validation of maxpacket value given in endpoint descriptor.
Add check of maxpacket for bulk endpoints. If maxpacket is not set in
descriptor, it's set to maximum value for given type on endpoint in used
speed.
Correct maxpacket value is:
FULL-SPEED HIGH-SPEED SUPER-SPEED
BULK 8, 16, 32, 64 512 1024
INTERRUPT 1..64 1..1024 1..1024
ISOCHRONOUS 1..1023 1..1024 1..1024
Signed-off-by: Robert Baldyga <r.baldyga@xxxxxxxxxxx>
---
Hello,
This is third version of my patch. Form last version I have fixed maxpacket
check for bulk transfers which has to have fixed size in each speed (except
for full speed devices, which allows to use one of four available values).
Also improved handling of descriptors which has not set wMaxPacketSize value.
In this case wMaxPacketSize field is set to maximum value, according to
endpoint type and device speed.
Best regards
Robert Baldyga
Samsung R&D Institute Poland
Changelog:
v3:
- fixed maxpacket check for bulk endpoints
- improved handling of ep descriptors which has not set wMaxPaketSize value
v2: https://lkml.org/lkml/2013/9/30/79
- arrange code for clearity
- fix support for super speed devices
v1: https://lkml.org/lkml/2013/9/27/127
drivers/usb/gadget/epautoconf.c | 97 ++++++++++++++++++++++++++++++---------
1 file changed, 75 insertions(+), 22 deletions(-)
diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index a777f7b..d62e4e9 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -124,37 +124,90 @@ ep_matches (
}
+ max = 0x7ff & usb_endpoint_maxp(desc);
+
/*
- * If the protocol driver hasn't yet decided on wMaxPacketSize
- * and wants to know the maximum possible, provide the info.
+ * Test if maxpacket given in descriptor isn't greater than maximum
+ * packet size for this endpoint
*/
- if (desc->wMaxPacketSize == 0)
- desc->wMaxPacketSize = cpu_to_le16(ep->maxpacket);
+ if (ep->maxpacket < max)
+ return 0;
- /* endpoint maxpacket size is an input parameter, except for bulk
- * where it's an output parameter representing the full speed limit.
- * the usb spec fixes high speed bulk maxpacket at 512 bytes.
+ /*
+ * Test if ep supports maxpacket size set in descriptor.
+ * If the protocol driver hasn't yet decided on wMaxPacketSize
+ * (when wMaxPacketSize == 0) and wants to know the maximum possible,
+ * provide the info.
*/
- max = 0x7ff & usb_endpoint_maxp(desc);
switch (type) {
+ case USB_ENDPOINT_XFER_BULK:
+ /*
+ * LIMITS:
+ * full speed: 64 bytes
+ * high speed: 512 bytes
+ * super speed: 1024 bytes
+ */
+ if (max == 0) {
+ if (gadget_is_superspeed(gadget))
+ desc->wMaxPacketSize = cpu_to_le16(1024);
+ else if (gadget_is_dualspeed(gadget))
+ desc->wMaxPacketSize = cpu_to_le16(512);
+ else
+ desc->wMaxPacketSize = cpu_to_le16(64);
+ } else {
+ if (max > 1024)
+ return 0;
+ if (!gadget_is_superspeed(gadget) && max > 512)
+ return 0;
+ if (!gadget_is_dualspeed(gadget) && max > 64)
+ return 0;
+ }
+ break;
+
case USB_ENDPOINT_XFER_INT:
- /* INT: limit 64 bytes full speed, 1024 high/super speed */
- if (!gadget_is_dualspeed(gadget) && max > 64)
- return 0;
- /* FALLTHROUGH */
+ /*
+ * LIMITS:
+ * full speed: 64 bytes
+ * high/super speed: 1024 bytes
+ * multiple transactions per microframe only for super speed
+ */
+ if (max == 0) {
+ if (gadget_is_dualspeed(gadget))
+ desc->wMaxPacketSize = cpu_to_le16(1024);
+ else
+ desc->wMaxPacketSize = cpu_to_le16(64);
+ } else {
+ if (max > 1024)
+ return 0;
+ if (!gadget_is_superspeed(gadget))
+ if ((desc->wMaxPacketSize & cpu_to_le16(3<<11)))
+ return 0;
+ if (!gadget_is_dualspeed(gadget) && max > 64)
+ return 0;
+ }
+ break;
case USB_ENDPOINT_XFER_ISOC:
- /* ISO: limit 1023 bytes full speed, 1024 high/super speed */
- if (ep->maxpacket < max)
- return 0;
- if (!gadget_is_dualspeed(gadget) && max > 1023)
- return 0;
-
- /* BOTH: "high bandwidth" works only at high speed */
- if ((desc->wMaxPacketSize & cpu_to_le16(3<<11))) {
- if (!gadget_is_dualspeed(gadget))
+ /*
+ * LIMITS:
+ * full speed: 1023 bytes
+ * high/super speed: 1024 bytes
+ * multiple transactions per microframe for high/super speed
+ */
+ if (max == 0) {
+ if (gadget_is_dualspeed(gadget))
+ desc->wMaxPacketSize = cpu_to_le16(1024);
+ else
+ desc->wMaxPacketSize = cpu_to_le16(1023);
+ } else {
+ if (max > 1024)
return 0;
- /* configure your hardware with enough buffering!! */
+ if (!gadget_is_dualspeed(gadget)) {
+ if (max > 1023)
+ return 0;
+ if ((desc->wMaxPacketSize & cpu_to_le16(3<<11)))
+ return 0;
+ }
}
break;
}
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
