This patch updates URB dequeue handling in wusbcore to make it more
reliable when a URB has been broken up into multiple WUSB transfer
request segments.
In wa_urb_dequeue, don't mark segments in the WA_SEG_SUBMITTED,
WA_SEG_PENDING or WA_SEG_DTI_PENDING states as completed if an ABORT
TRANSFER request was sent to the HWA to clean them up. Wait for the
HWA to return a transfer result indicating that it has aborted the
request before cleaning it up. This prevents the DTI state machine
from losing track of transfers and avoids confusion in the case where a
read transfer segment is dequeued after the driver has received the
transfer result but before the data is received.
Signed-off-by: Thomas Pugliese <thomas.pugliese@xxxxxxxxx>
---
drivers/usb/wusbcore/wa-xfer.c | 122 ++++++++++++++++++++++++++++------------
1 file changed, 87 insertions(+), 35 deletions(-)
diff --git a/drivers/usb/wusbcore/wa-xfer.c b/drivers/usb/wusbcore/wa-xfer.c
index 9b6501e..f19318d 100644
--- a/drivers/usb/wusbcore/wa-xfer.c
+++ b/drivers/usb/wusbcore/wa-xfer.c
@@ -367,15 +367,11 @@ static void __wa_xfer_abort_cb(struct urb *urb)
*
* The callback (see above) does nothing but freeing up the data by
* putting the URB. Because the URB is allocated at the head of the
- * struct, the whole space we allocated is kfreed.
- *
- * We'll get an 'aborted transaction' xfer result on DTI, that'll
- * politely ignore because at this point the transaction has been
- * marked as aborted already.
+ * struct, the whole space we allocated is kfreed. *
*/
-static void __wa_xfer_abort(struct wa_xfer *xfer)
+static int __wa_xfer_abort(struct wa_xfer *xfer)
{
- int result;
+ int result = -ENOMEM;
struct device *dev = &xfer->wa->usb_iface->dev;
struct wa_xfer_abort_buffer *b;
struct wa_rpipe *rpipe = xfer->ep->hcpriv;
@@ -396,7 +392,7 @@ static void __wa_xfer_abort(struct wa_xfer *xfer)
result = usb_submit_urb(&b->urb, GFP_ATOMIC);
if (result < 0)
goto error_submit;
- return; /* callback frees! */
+ return result; /* callback frees! */
error_submit:
@@ -405,7 +401,7 @@ error_submit:
xfer, result);
kfree(b);
error_kmalloc:
- return;
+ return result;
}
@@ -1295,7 +1291,7 @@ int wa_urb_dequeue(struct wahc *wa, struct urb *urb)
struct wa_xfer *xfer;
struct wa_seg *seg;
struct wa_rpipe *rpipe;
- unsigned cnt;
+ unsigned cnt, done = 0, xfer_abort_pending;
unsigned rpipe_ready = 0;
xfer = urb->hcpriv;
@@ -1309,6 +1305,7 @@ int wa_urb_dequeue(struct wahc *wa, struct urb *urb)
goto out;
}
spin_lock_irqsave(&xfer->lock, flags);
+ pr_debug("%s: DEQUEUE xfer id 0x%08X\n", __func__, wa_xfer_id(xfer));
rpipe = xfer->ep->hcpriv;
if (rpipe == NULL) {
pr_debug("%s: xfer id 0x%08X has no RPIPE. %s",
@@ -1324,9 +1321,11 @@ int wa_urb_dequeue(struct wahc *wa, struct urb *urb)
if (xfer->seg == NULL) /* still hasn't reached */
goto out_unlock; /* setup(), enqueue_b() completes */
/* Ok, the xfer is in flight already, it's been setup and submitted.*/
- __wa_xfer_abort(xfer);
+ xfer_abort_pending = __wa_xfer_abort(xfer) >= 0;
for (cnt = 0; cnt < xfer->segs; cnt++) {
seg = xfer->seg[cnt];
+ pr_debug("%s: xfer id 0x%08X#%d status = %d\n",
+ __func__, wa_xfer_id(xfer), cnt, seg->status);
switch (seg->status) {
case WA_SEG_NOTREADY:
case WA_SEG_READY:
@@ -1335,42 +1334,50 @@ int wa_urb_dequeue(struct wahc *wa, struct urb *urb)
WARN_ON(1);
break;
case WA_SEG_DELAYED:
+ /*
+ * delete from rpipe delayed list. If no segments on
+ * this xfer have been submitted, __wa_xfer_is_done will
+ * trigger a giveback below. Otherwise, the submitted
+ * segments will be completed in the DTI interrupt.
+ */
seg->status = WA_SEG_ABORTED;
spin_lock_irqsave(&rpipe->seg_lock, flags2);
list_del(&seg->list_node);
xfer->segs_done++;
- rpipe_ready = rpipe_avail_inc(rpipe);
spin_unlock_irqrestore(&rpipe->seg_lock, flags2);
break;
- case WA_SEG_SUBMITTED:
- seg->status = WA_SEG_ABORTED;
- usb_unlink_urb(&seg->tr_urb);
- if (xfer->is_inbound == 0)
- usb_unlink_urb(seg->dto_urb);
- xfer->segs_done++;
- rpipe_ready = rpipe_avail_inc(rpipe);
- break;
- case WA_SEG_PENDING:
- seg->status = WA_SEG_ABORTED;
- xfer->segs_done++;
- rpipe_ready = rpipe_avail_inc(rpipe);
- break;
- case WA_SEG_DTI_PENDING:
- usb_unlink_urb(wa->dti_urb);
- seg->status = WA_SEG_ABORTED;
- xfer->segs_done++;
- rpipe_ready = rpipe_avail_inc(rpipe);
- break;
case WA_SEG_DONE:
case WA_SEG_ERROR:
case WA_SEG_ABORTED:
break;
+ /*
+ * In the states below, the HWA device already knows
+ * about the transfer. If an abort request was sent,
+ * allow the HWA to process it and wait for the
+ * results. Otherwise, the DTI state and seg completed
+ * counts can get out of sync.
+ */
+ case WA_SEG_SUBMITTED:
+ case WA_SEG_PENDING:
+ case WA_SEG_DTI_PENDING:
+ /*
+ * Check if the abort was successfully sent. This could
+ * be false if the HWA has been removed but we haven't
+ * gotten the disconnect notification yet.
+ */
+ if (!xfer_abort_pending) {
+ seg->status = WA_SEG_ABORTED;
+ rpipe_ready = rpipe_avail_inc(rpipe);
+ xfer->segs_done++;
+ }
+ break;
}
}
xfer->result = urb->status; /* -ENOENT or -ECONNRESET */
- __wa_xfer_is_done(xfer);
+ done = __wa_xfer_is_done(xfer);
spin_unlock_irqrestore(&xfer->lock, flags);
- wa_xfer_completion(xfer);
+ if (done)
+ wa_xfer_completion(xfer);
if (rpipe_ready)
wa_xfer_delayed_run(rpipe);
return 0;
@@ -1441,9 +1448,51 @@ static int wa_xfer_status_to_errno(u8 status)
}
/*
+ * If a last segment flag and/or a transfer result error is encountered,
+ * no other segment transfer results will be returned from the device.
+ * Mark the remaining submitted or pending xfers as completed so that
+ * the xfer will complete cleanly.
+ */
+static void wa_complete_remaining_xfer_segs(struct wa_xfer *xfer,
+ struct wa_seg *incoming_seg)
+{
+ int index;
+ struct wa_rpipe *rpipe = xfer->ep->hcpriv;
+
+ for (index = incoming_seg->index + 1; index < xfer->segs_submitted;
+ index++) {
+ struct wa_seg *current_seg = xfer->seg[index];
+
+ BUG_ON(current_seg == NULL);
+
+ switch (current_seg->status) {
+ case WA_SEG_SUBMITTED:
+ case WA_SEG_PENDING:
+ case WA_SEG_DTI_PENDING:
+ rpipe_avail_inc(rpipe);
+ /*
+ * do not increment RPIPE avail for the WA_SEG_DELAYED case
+ * since it has not been submitted to the RPIPE.
+ */
+ case WA_SEG_DELAYED:
+ xfer->segs_done++;
+ current_seg->status = incoming_seg->status;
+ break;
+ case WA_SEG_ABORTED:
+ break;
+ default:
+ WARN(1, "%s: xfer 0x%08X#%d. bad seg status = %d\n",
+ __func__, wa_xfer_id(xfer), index,
+ current_seg->status);
+ break;
+ }
+ }
+}
+
+/*
* Process a xfer result completion message
*
- * inbound transfers: need to schedule a DTI read
+ * inbound transfers: need to schedule a buf_in_urb read
*
* FIXME: this function needs to be broken up in parts
*/
@@ -1484,6 +1533,8 @@ static void wa_xfer_result_chew(struct wahc *wa, struct wa_xfer *xfer,
seg->result = wa_xfer_status_to_errno(usb_status);
dev_err(dev, "DTI: xfer %p#:%08X:%u failed (0x%02x)\n",
xfer, xfer->id, seg->index, usb_status);
+ seg->status = ((usb_status & 0x7F) == WA_XFER_STATUS_ABORTED) ?
+ WA_SEG_ABORTED : WA_SEG_ERROR;
goto error_complete;
}
/* FIXME: we ignore warnings, tally them for stats */
@@ -1569,10 +1620,11 @@ error_submit_buf_in:
wa->buf_in_urb->sg = NULL;
error_sg_alloc:
__wa_xfer_abort(xfer);
-error_complete:
seg->status = WA_SEG_ERROR;
+error_complete:
xfer->segs_done++;
rpipe_ready = rpipe_avail_inc(rpipe);
+ wa_complete_remaining_xfer_segs(xfer, seg);
done = __wa_xfer_is_done(xfer);
/*
* queue work item to clear STALL for control endpoints.
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
