Hi,
On Friday 20 September 2013 04:41 AM, Russell King wrote:
The correct way for a driver to specify the coherent DMA mask is
not to directly access the field in the struct device, but to use
dma_set_coherent_mask(). Only arch and bus code should access this
member directly.
Convert all direct write accesses to using the correct API.
Signed-off-by: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
---
drivers/ata/pata_ixp4xx_cf.c | 5 ++++-
drivers/gpu/drm/exynos/exynos_drm_drv.c | 6 +++++-
drivers/gpu/drm/omapdrm/omap_dmm_tiler.c | 5 +++--
3 files changed, 12 insertions(+), 4 deletions(-)
diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c
index 1ec53f8..ddf470c 100644
--- a/drivers/ata/pata_ixp4xx_cf.c
+++ b/drivers/ata/pata_ixp4xx_cf.c
@@ -144,6 +144,7 @@ static int ixp4xx_pata_probe(struct platform_device *pdev)
struct ata_host *host;
struct ata_port *ap;
struct ixp4xx_pata_data *data = dev_get_platdata(&pdev->dev);
+ int ret;
cs0 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
cs1 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
@@ -157,7 +158,9 @@ static int ixp4xx_pata_probe(struct platform_device *pdev)
return -ENOMEM;
/* acquire resources and fill host */
- pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+ ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
+ if (ret)
+ return ret;
data->cs0 = devm_ioremap(&pdev->dev, cs0->start, 0x1000);
data->cs1 = devm_ioremap(&pdev->dev, cs1->start, 0x1000);
diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.c b/drivers/gpu/drm/exynos/exynos_drm_drv.c
index bb82ef7..81192d0 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_drv.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_drv.c
@@ -286,7 +286,11 @@ static struct drm_driver exynos_drm_driver = {
static int exynos_drm_platform_probe(struct platform_device *pdev)
{
- pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+ int ret;
+
+ ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
+ if (ret)
+ return ret;
return drm_platform_init(&exynos_drm_driver, pdev);
}
diff --git a/drivers/gpu/drm/omapdrm/omap_dmm_tiler.c b/drivers/gpu/drm/omapdrm/omap_dmm_tiler.c
index acf6678..701c4c1 100644
--- a/drivers/gpu/drm/omapdrm/omap_dmm_tiler.c
+++ b/drivers/gpu/drm/omapdrm/omap_dmm_tiler.c
@@ -664,8 +664,9 @@ static int omap_dmm_probe(struct platform_device *dev)
}
/* set dma mask for device */
- /* NOTE: this is a workaround for the hwmod not initializing properly */
- dev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+ ret = dma_set_coherent_mask(&dev->dev, DMA_BIT_MASK(32));
+ if (ret)
+ goto fail;
Tested with omapdrm on omap4 panda es board.
Thanks,
Archit
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
